pCO_2 distribution and CO_2 flux on the inner continental shelf of the East China Sea during summer 2011

Measurements ofpH, total alkalinity （TA）, partial pressure of CO2 （pCO2） and air-sea CO2 flux （FCO2） were conducted for the inner continental shelf of the East China Sea （ECS） during August 2011. Variations in pCO2 distribution and FCO2 magnitude during the construction of the Three Gorges Dam （TGD） （2003-2009）, and the potential effects of the TGD on the air-sea CO2 exchange were examined. Results showed that the ECS acts as an overall CO2 sink during summer, with pCO2 ranging from 107 to 585 p.atm and an average FCO2 of -6.39 mmol/（m2·d）. Low pCO2 （〈350 μatm） levels were observed at the central shelf （28°-32°N, 123°-125.5°E） where most CO2-absorption occurred. HighpCO2 （〉420 μatm） levels were found in the Changjiang estuary and Hangzhou Bay which acted as the main CO2 source. A negative relationship between pCO2 and salinity （R2=0.722 0） in the estuary zone indicated the predominant effect of the Changjiang Diluted Water （CDW） on the seawater CO2 system, whereas a positive relationship （R2=0.744 8） in the offshore zone revealed the influence of the Taiwan Current Warm Water （TCWW）. Together with the historical data, our results indicated that the CO2 sink has shown a shift southwest while FC02 exhibited dramatic fluctuation during the construction of the TGD, which is located in the middle reaches of the Changjiang. These variations probably reflect fluctuation in the Changjiang runoff, nutrient import, phytoplankton productivity, and sediment input, which are likely to have been caused by the operations of the TGD. Nevertheless, the potential influence of the TGD on the CO2 flux in the ECS is worthy of further study.

Review on current advances,future challenges and consideration issues for post-combustion CO_2 capture using amine-based absorbents

Among the current technologies for post-combustion CO2 capture,amine-based chemical absorption appears to be the most technologically mature and commercially viable method.This review highlights the opportunities and challenges in post-combustion CO2 capture using amine-based chemical absorption technologies.In addition,this review provides current types and emerging trends for chemical solvents.The issues and performance of amine solvents are reviewed and addressed in terms of thermodynamics,kinetics,mass transfer,regeneration and solvent management.This review also looks at emerging and future trends in post-combustion CO2 capture using chemical solvents in the near to mid-term.

Precipitation Pulses and Soil CO_2 Emission in Desert Shrubland of Artemisia ordosica on the Ordos Plateau of Inner Mongolia,China

Precipitation is the major driver of ecosystem functions and processes in semiarid and arid regions. In such waterlimited ecosystems, pulsed water inputs directly control the belowground processes through a series of soil drying and rewetting cycles. To investigate the effects of sporadic addition of water on soil CO2 effux, an artificial precipitation event （3 mm） was applied to a desert shrub ecosystem in the Mu Us Sand Land of the Ordos Plateau in China. Soil respiration rate increased 2.8 4.1 times immediately after adding water in the field, and then it returned to background level within 48 h. During the experiment, soil CO2 production was between 2 047.0 and 7 383.0 mg m^-2. In the shrubland, soil respiration responses showed spatial variations, having stronger pulse effects beneath the shrubs than in the interplant spaces. The spatial variation of the soil respiration responses was closely related with the heterogeneity of soil substrate availability. Apart from precipitation, soil organic carbon and total nitrogen pool were also identified as determinants of soil CO2 loss in desert ecosystems.

CO_2 Leakage Identification in Geosequestration Based on Real Time Correlation Analysis Between Atmospheric O_2 and CO_2

The paper describes a method for monitoring CO2 leakage in geological carbon dioxide sequestration. A real time monitoring parameter, apparent leakage flux(ALF), is presented to monitor abnormal CO2 leakage, which can be calculated by atmospheric CO2 and O2 data. The computation shows that all ALF values are close to zero-line without the leakage. With a step change or linear perturbation of concentration to the initial CO2 concentration data with no leakage, ALF will deviate from background line. Perturbation tests prove that ALF method is sensitive to linear perturbation but insensitive to step change of concentration. An improved method is proposed based on real time analysis of surplus CO2 concentration in least square regression process, called apparent leakage flux from surplus analysis(ALFs), which is sensitive to both step perturbation and linear perturbations of concentration. ALF is capable of detecting concentration increase when the leakage occurs while ALFs is useful in all periods of leakage. Both ALF and ALFs are potential approaches to monitor CO2 leakage in geosequestration project.

Kinetic contribution of CO_2/O_2 additive in methane conversion activated by non-equilibrium plasmas

A temperature-controlled and pressure-controlled coaxial dielectric barrier discharge （DBD） reactor was developed to decouple the thermal and kinetic effects of radio frequency （RF） discharge on methane conversion, and further to compare the kinetic behaviors of the mechanistically similar reactions of methane conversion with O2 and CO2 additives. A kinetic mechanism for RF plasma assisted methane conversion was assembled. The formation of products in the RF plasma reactor was measured with Gas Chromatography （GC-TCD） and the data were used to validate the kinetic model. The experimental and computational results showed the different kinetic roles of carbon dioxide and oxygen additives in methane conversion, due to the different dissociation and ionization energy of the two additive gases, as well as the thus produced electron energy distribution function （EEDF）. Fuel oxidation by plasma generated O, O（1D）, O2（a1△Ag）, O2（b1∑＋g） and O＋ in partial oxidation of methane was observed essential for methane consumption, which resulted in an increase in methane conversion rate, compared to pure methane pyrolysis and dry reforming of methane with CO2 additive. It was also found that dry reforming of methane with CO2 was by far the easier to produce the syngas as well as C2 hydrocarbon species, due to the weak oxidation ability of CO2 and also the significant deposition of the electron energy on CH4 disso- ciation in a dry reforming discharge mixture. This kinetic study produced comparative data to demonstrate the contribution of CO2/O2 additive in non-eauilibrium plasma assisted methane conversion.

The Soil Moisture and Net Primary Production Affected by CO_2 and Climate Change Using a Coupled Model

In this paper, a coupled model was used to estimate the responses of soil moisture and net primary production of vegetation(NPP) to increasing atmospheric CO2 concentration and climate change. The analysis uses three experiments simulated by the second-generation Earth System Model(CanESM2) of the Canadian Centre for Climate Modelling and Analysis(CCCma), which are part of the phase 5 of the Coupled Model Intercomparison Project(CMIP5). The authors focus on the magnitude and evolution of responses in soil moisture and NPP using simulations modeled by CanESM, in which the individual effects of increasing CO2 concentration and climate change and their combined effect are separately accounted for. When considering only the single effect of climate change, the soil moisture and NPP have a linear trend of 0.03 kg m–2 yr–1 and –0.14 gC m–2 yr–2, respectively. However, such a reduction in the global NPP results from the decrease of NPP at lower latitudes and in the Southern Hemisphere, although increased NPP has been shown in high northern latitudes. The largest negative trend is located in the Amazon basin at –1.79 gC m–2 yr–2. For the individual effect of increasing CO2 concentration, both soil moisture and NPP show increases, with an elevated linear trend of 0.02 kg m–2 yr–1 and 0.84 gC m–2 yr–2, respectively. Most regions show an increasing NPP, except Alaska. For the combined effect of increasing atmospheric CO2 and climate change, the increased soil moisture and NPP exhibit a linear trend of 0.04 kg m–2 yr–1 and 0.83 gC m–2 yr–2 at a global scale. In the Amazon basin, the higher reduction in soil moisture is illustrated by the model, with a linear trend of –0.39 kg m–2 yr–1, for the combined effect. Such a change in soil moisture is caused by a weakened Walker circulation simulated by this coupled model, compared with the single effect of increasing CO2 concentration(experiment M2), and a consequence of the reduction in NPP is also shown in this area, with a linear trend of-0.16 gC m-2 yr-2.

Adsorption and Transfer Properties for Toluene and pDichlorobenzene in Dense CO_2/Silica Gel Packed Bed System by Moment Method and Time-Domain Analysis

Based on chromatographic theory, the moment method and the time-domain fitting analysis were applied to measure and evaluate the adsorption equilibrium constant and mass transfer properties (axial dispersion coefficient and effective intra-particle diffusivity) for toluene and p-dichlorobenzene on silica gel adsorbent in the subcritical and supercritical CO2. An apparatus based on supercritical fluid chromatography was established and the experiments were performed at temperatures of 298.15-318.15 K and pressures of 7.5-17.8 MPa. The two methods have been compared. The results show that for the systems studied here the moment method can give reasonable values for both adsorption equilibrium constant and mass transfer properties, but the time-domain analysis only can obtain the adsorption equilibrium constant. The dependence of adsorption equilibrium constant and mass transfer properties on temperature and pressure was investigated.

Theoretical Study on CO_2 Transcritical Cycle Combined Ejector Cycle Refrigeration System

Chlorofluorocarbons(CFCs) or hydrochlorofluorocarbons(HCFCs) are as main refrigerants used in traditional refrigeration systems driven by electricity from burning fossil fuels, which is regarded as one of the major reasons for ozone depletion (man-made refrigerants emission) and global warming (CO 2 emission). So people pay more and more attention to natural refrigerants and energy saving technologies. An innovative system combining CO 2 transcritical cycle with ejector cycle is proposed in this paper. The CO 2 compression sub-cycle is powered by electricity with the characteristics of relatively high temperature in the gas cooler (defined as an intercooler by the proposed system). In order to recover the waste heat, an ejector sub-cycle operating with the natural refrigerants (NH 3, H 2O) is employed. The two sub-cycles are connected by an intercooler. This combined cycle joins the advantages of the two cycles together and eliminates the disadvantages. The influences of the evaporation temperature in CO 2 compression sub-cycle, the evaporation temperature in the ejector sub-cycle, the temperature in the intercooler and the condensation temperature in the proposed system performance are discussed theoretically in this study. In addition, some unique features of the system are presented.

Flue Gas CO_2 Emission Reduction Technologies and Applications

The current status and trend of CO2 emission from coal-fired power plants in China are introduced. Main flue gas decarbonization technologies and their prospective of applications in China are discussed in two separate parts-capture and sequestration. It is stated that the selection of CO2 capture and sequestration technologies relates closely with the geographical location of power plants, with the destination of CO2 being the key. Further, it is suggested that industrialized test centers or test platforms of national or industrial level should be set up.

Solubilities of Cimaterol and Mabuterol in SF-CO_2

The solubilities of two β-agonists, cimaterol and mabuterol, in supercritical carbon dioxide (SF-CO2) were measured by a recirculating method at temperatures of 40℃ and 60℃ and pressures between 9 MPa to 49 MPa.The compounds exhibit very limited solubilities in the range of 10^-5 to 10^-7 (mole fraction). Cimaterol has a higher solubility than that of mabuterol. The experimental data of solubility were correlated by four density-based models.The correlation accuracy highly depends on the system investigated, which is mainly determined by the density ranges and temperature.

Thermodynamic Analysis and Comparison on Low Temperature CO_2-NH_3 Cascade Refrigeration Cycle

This paper is focused on the cascade refrigeration cycle using natural refrigerant CO 2-NH 3. The properties of refrigerants CO 2 and NH 3 are introduced and analyzed.CO 2 has the advantage in low stage of cascade refrigeration cycle due to its good characteristics and properties. The thermodynamic analysis results of the CO 2-NH 3 cascade refrigeration cycle demonstrates that the cycle has an optimum condensation temperature of low stage and also has an optimum flow rate ratio.By comparing with the R13-R22 and NH 3-NH 3 cascade refrigeration cycles, the mass flow rate ratio of CO 2-NH 3 is larger than those of R13-R22 and NH 3-NH 3, the theoretical COP of CO 2-NH 3 cascade refrigeration cycle is larger than that of the R13-R22 cascade cycle and smaller than that of the NH 3-NH 3 cascade cycle. But the real COP of CO 2-NH 3 cascade cycle will be higher than those of R13-R22 and NH 3-NH 3 because the specific volume of CO 2 at low temperature does not change much and its dynamic viscosity is also small.

Synthesis and characterization of switchable ionic compound based on DBU, CH_3OH, and CO_2

Switchable ionic compounds have wide applications in chemical processes.A switchable ionic compound based on 1,8-diazabicyclo-[5.4.0]-undec-7-ene(DBU),CH_3OH and CO_2 was synthesized and characterized.DBU/CH_3OH/CO_2 ionic compound was prepared in the presence of excess methanol,and then the excess methanol was removed by reduced pressure distillation in CO_2 atmosphere.The product yield(100%) reached the theoretical maximum for the first time.Its structure was identified by NMR,FT-IR,and XRD.The crystal product shows 8strong peaks in XRD at 2θ values of 16.0547°,16.4308°,16.7651°,18.8714°,19.2140°,21.9471°,22.0780°,and25.5661°.Its decomposition onset temperature(53 ℃) was affirmed by TGA,which is lower than its melting point.And its ionic switch point was measured by conductivity.

Shale gas exploitation with supercritical CO_2 technology

This paper analyzes the physicochemical properties of supercritical C02, the characteristic of shale gas and shale gas reservoirs. The technologies of drilling, production, fracturing using the supercritical CO2 in shale gas explo- ration are proposed, to increase the penetration rate, decrease the damage to formation while fracturing, and enhance the recovery of shale gas. It is believed that the huge economic benefits of shale gas exploration with the supercritical CO2 fluid will be obtained, and it also can initiate a new technology field of CO2 in the petroleum engineering.

Study on CO_2 Emission Reduction from Chinese Coal-Fired Power Plants Between 1993 and 2010

Based on the Chinese thermal coal and power generation data,such as ultimate analysis,proximate analysis,low heat value(LHV)on as received basis,power generation volume,thermal coal consumption volume and net coal consumption rate,several mathematical models for calculating CO 2 reduction by Chinese coal-fired power plants are established.Calculations of the CO 2 emission factor(CEF),the CO 2 emission volume and reduction volume are made according to these models.The calculation results reveal that between 1993 and 2010,the CO 2 emission volume reached 31.069 Gt,reduced by 0.439 Gt,averaging 28.83 Mt each year.

Computer Simulation of Adsorption and Separation of CO2/CH4 in Modified COF-102

Covalent organic framework （COF） is a porous material with low density and large BET （Brtmauer-Emmett-Teller） surface area. They have great potential in gas adsorption and separation. In this work, the adsorption of pure CO2 and CO2/CH4 mixture on modified COF-102 was simulated by using GCMC （grand canonical Monte Carlo）. Metal Li was incorporated into COF-102 through three doping methods, including charge exchange, O^--Li6＋ dipolar interaction and O^--Li^＋ chemical bonding. The influence of Li doping on the adsorption of CO2 was studied. The results showed that among the three methods, the dipole doping is the best way to improve CO2 adsorption performance. Further, the ligands of COF-102 were replaced by extended aromatic moieties, such as diphenyl and pyrene. The adsorption capacity of CO2 and CH4, and the selectivity of CO2/CH4 on the ligand-replaced COF-102 were studied. The capacity of CO2 and CH4 on the ligand-replaced COF-102 had obvious changes; hence the selectivity of CO2/CH4 can be adjusted accordingly.

β-Diketones at Water/Supercritical CO2 Interface： A Molecular Dynamics Simulation

The structural and dynamical properties of hexafluoroacetylacetone(HFA) and acetylacetone(AA) at the water/supercritical CO2(Sc-CO2) interface at 20 MPa and 318.15 K are investigated by molecular dynamics simulations.The TIP3P potential is used for water and the EPM2 model is for CO2.The water phase and SC-CO2 phase form a distinct immiscible liquid-liquid interface.The two chelating molecules show interfacial preference.Comparatively,the AA molecules show somewhat more preference for interfacial region,whereas the HFA molecules are preferably near the Sc-CO2 phase.The orientational distribution of the β-diketone molecules and the radial distribution functions between β-diketones and solvents are obtained in order to study the microscopic structural properties of the β-diketones at the water-SC-CO2 interface.It is found that the translational diffusion and rotational diffusion of HFA and AA are obviously anisotropic and decrease as the β-diketone molecules approach the interface.The anisotropic dynamic behavior for the solute molecules is related to the corresponding structural properties.

Photosynthetic and Growth Responses to Elevated [CO2] are Determined by Multiple Forest Ecosystem Conditions

The responses of photosynthesis and growth of forest trees to rising atmospheric carbon dioxide concentration [CO2] are modified by ecosystem conditions. With the exception of a few, the vast majority of empirical studies on the impact of future high CO2 levels on forest trees have focused on [CO2] alone or in combination with an environmental factor. This paper uses the case of CO2 × nutrient and CO2 × nutrient-related interactions to evaluate the relative value of single or multiple ecosystem factors in determining the responses of photosynthesis and growth to elevated [CO2]. A comprehensive literature search was conducted with Google Scholar. The findings show a consensus among studies that CO2 and nutrient availability have synergistic effects on photosynthesis and growth. However, combinations of nutrient availability with temperature or moisture modify the CO2 effect in ways different from nutrient availability alone. To increase the predictive power of empirical studies, it is recommended that conclusions on the responses of forest trees to elevated atmospheric [CO2] be based on interactions with multiple, rather than single, ecosystem conditions.

Novel PLA/Chitosan Composite MaterialsPrepared by SCF-CO_(2) Technique

Because of the incomparable merits （nontoxicity, non-remainder, fast transfer mass） of supercritical carbon dioxide fluid technique（SC-CO2）, it was used to developed a series of novel biodegradable tissue engineering scaffold materials in this research. The novel PLA/chitosan composite materials could be molded to different shapes, and the porosity of the materials were over 200 lam and connected. Chondrocyte cultivation, subcutaneous and intramuscular implantation were mainly discussed this paper. The results showed that the cells could well adhere, grow and multiplicate on the surface of the materials, which indicated good biocompatibility of the composite materials. The plantation test revealed that the PLA materials had already dismissed 2 month late in the body, while the composite materials could still keep certain strength and shape, and the most important things is the response of the tissue toward the implanted PLA/chitosan composite materials was mild and had far less inflammation than PLA materials. 8 to 16 weeks later, fiber membrane was stable; degradation of the materials was seen clear and tissue had already spread into it.

微管壳式换热器在能量转换循环中的应用

目前,超临界二氧化碳(S-CO_(2))布雷顿循环普遍采用印刷电路板换热器(PCHE)来保证其相对其他能量转换循环的紧凑性优势。PCHE芯体为整体结构,若内部出现泄漏或结垢等问题,很难进行维护与检修。本文提出了一种微管壳式换热器(MSTE),其结构与传统管壳式换热器类似,但其管径缩小至微通道级。由于MSTE的流道横截面积占总截面积之比较PCHE大,在典型的回热器与冷却器设计工况下,相对PCHE而言,采用MSTE可将体积与质量均减小30%以上。灵敏性分析结果显示,采用本文设计的MSTE结构的回热器与冷却器,回热器冷热流道入口温度升高20℃左右,压缩机入口温度变化均不超过1℃,说明该种结构换热器的换热能力足够支撑能量转换循环的一般工况波动。

欧洲能源复兴计划CCS示范项目实施进展与启示

碳捕集与封存(Carbon Capture and Storage,CCS)作为最有前景可有效深度减排的低碳技术之一,在世界范围内受到广泛推行,特别是欧洲,其作为全球CCS技术的先行者,一直在积极推进该项技术工业化进程。2009年,欧盟委员会(European Commission,EC)启动欧洲能源复兴计划(European Energy Programme for Recovery,EEPR),正式批准资助6个全流程CCS示范项目。这6个CCS示范项目囊括了当前所有可行的CO2工业捕集技术,运输方式以及封存方法,本文将对其基本情况和最近进展进行介绍,并重点对欧盟层面的CCS法律法规与此6个项目所在欧盟成员国的CCS技术与政策环境的交互影响进行比对和分析,以进一步系统评述欧洲能源复兴计划CCS示范项目带来的积极成果,包括达成减排目标和气候政策,建立欧洲CCS示范项目网络共享平台,获得CCS技术研发突破等,同时也详细列举了这些项目目前所面临的阻碍与困境,如相关法律政策缺乏执行力,融资困难,公众接受度低,技术成本高等。最后,试探讨欧盟能源复兴计划CCS全流程示范项目实施发展现状对我国未来CCS商业化走向的思索与启示。