Metallic titanium was electrochemically dissoluted in absolute ethanol in the presence of Et4N· Br(as electro conductive additive),The electrolyte solution was then directly hydrolysized to obtain nanocrystalline...Metallic titanium was electrochemically dissoluted in absolute ethanol in the presence of Et4N· Br(as electro conductive additive),The electrolyte solution was then directly hydrolysized to obtain nanocrystalline TiO2.The powder obtained was calcined at 720℃ for 1 h.FT IR,Raman spectra,XRD and TEM were used to investigate the structure and particle size of the powder.Studies showed that the nanocrystalline TiO2 prepared by this method was of monocline structure with high textural stability and narrow size distribution of 10－ 20 nm,and its Raman spectra showed a shift of about 25 cm－ 1.The experiments also showed that the product yield could be improved by controlling the temperature under 50－ 60℃ ,selecting R4N· Br as conductive additive and preventing titanium anode from being passivated.The electrochemical dissolution of metal anode may be recommanded as a promising technique for the synthesis of nanomaterials.展开更多
In this article, we report the preparation of a three-dimensional（3D） interconnected mesoporous anatase TiO2-SiO2 nanocomposite. The nanocomposite was obtained by using an ordered two-dimensional（2D） hexagonal mes...In this article, we report the preparation of a three-dimensional（3D） interconnected mesoporous anatase TiO2-SiO2 nanocomposite. The nanocomposite was obtained by using an ordered two-dimensional（2D） hexagonal mesoporous anatase 70 TiO2-30 SiO2-950 nanocomposite（crystallized at 950 °C for 2 h） as a precursor, NaO H as an etchant of SiO2 via a ＂creating mesopores in the pore walls＂ approach. Our strategy adopts mild conditions of creating pores such as diluted NaO H solution, appropriate temperature and solid/liquid ratio, etc. aiming at ensuring the integrities of mesopores architecture and anatase nanocrystals. XRD, TEM and N2 sorption techniques have been used to systematically investigate the physico-chemical properties of the nanocomposites. The results show that the intrawall mesopores are highly dense and uniform（average pore size 3.6 nm）, and highly link the initial mesochannels in a 3D manner while retaining mesostructural integrity. There is no significant change to either crystallinity or size of the anatase nanocrystals before and after creating the intrawall mesopores. The photocatalytic degradation rates of rhodamine B（RhB, 0.303 min^–1） and methylene blue（MB, 0.757 min^–1） dyes on the resultant nanocomposite are very high, which are 5.1 and 5.3 times that of the precursor; even up to 16.5 and 24.1 times that of Degussa P25 photocatalyst, respectively. These results clearly demonstrate that the 3D interconnected mesopores structure plays an overwhelming role to the increments of activities. The 3D mesoporous anatase TiO2-SiO2 nanocomposite exhibits unexpected-high degradation activities to RhB and MB in the mesoporous metal oxide-based materials reported so far. Additionally, the nanocomposite is considerably stable and reusable. We believe that this method would pave the way for the preparation of other 3D highly interconnected mesoporous metal oxide-based materials with ultra-high performance.展开更多
The effect of inhaled nano-TiO2 on lung histology and serum biochemical indexes is evaluated in healthy and adult Kunming mice（eight in each group）after exposure to TiO2 aerosols（1 500 mg/m3）in a sealed chamber.An...The effect of inhaled nano-TiO2 on lung histology and serum biochemical indexes is evaluated in healthy and adult Kunming mice（eight in each group）after exposure to TiO2 aerosols（1 500 mg/m3）in a sealed chamber.Another eight mice are exposed to indoor air to be served as a control group.Lung tissue and blood are collected after euthanizing the animals.The results show that lactate dehydrogenase（LDH）activity increases in all experimental groups.Alanine aminotransferase（ALT）activity and blood urea nitrogen（BUN）levels are increased in the group exposed to TiO2 aerosols for 28 d,and creatinine（Cr）levels are increased in 14 d and 28 d samples（P0.05）.No obvious changes are observed in other serum indexes.Lungs of mice exposed to 28 d exposure show significant but moderate increase in pulmonary inflammation,and many TiO2 particles are found in the interstitium of pulmonary alveoli.展开更多
The core-shell structured TiO2/SiO2 @Fe3O4 photocatalysts were prepared using Fe3O4 as magnetic core,tetraethoxysilane（TEOS） as silica source and tetrabutyl titanate（TBOT） as titanium sources.The as-obtained struc...The core-shell structured TiO2/SiO2 @Fe3O4 photocatalysts were prepared using Fe3O4 as magnetic core,tetraethoxysilane（TEOS） as silica source and tetrabutyl titanate（TBOT） as titanium sources.The as-obtained structure was composed of a SiO2@Fe3O4 core and a porous TiO2 shell.The diameter of SiO2@Fe3O4 core was about 205 nm with thickness of porous TiO2 of about 5-6 nm.The 9%TiO2/6%SiO2@Fe3O4 microspheres possess the highest BET surface area and the BJH pore volume,which are 373.5 m2.g-1 and 0.28 cm3.g-1,respectively.The 9%TiO2/6%SiO2@Fe3O4 photocatalyst exhibited an excellent performance for the degradation of methyl orange and methylene blue dyes.Two different dyes were completely decolorized in 60 min under UV irradiation.The photocatalytic activity and the amount of catalyst were almost not decrease after recycling for 6 times by using external magnetic field.展开更多
Monotungsten carbide and titania nanocomposite with core-shell（WC@TiO2）structure was prepared by a new approach of spray drying and reduction-carbonization reaction,with titania nanopowder and ammonium metatungstate...Monotungsten carbide and titania nanocomposite with core-shell（WC@TiO2）structure was prepared by a new approach of spray drying and reduction-carbonization reaction,with titania nanopowder and ammonium metatungstate as precursors,methane as carbon source,and hydrogen as reduction gas.The sample was characterized by X-ray diffraction,scanning electron microscope,high resolution transmission electron microscope and X-ray energy dispersion spectroscopy.The results show that its crystal phase is composed of brookite,tungsten and monotungsten carbide.The morphology of the sample particle is irregular sphere-like,with a diameter smaller than 100 nm.Its chemical components are titanium,tungsten,carbon and oxygen.Monotungsten carbide nanoparticles lie on the surface of titania core and form an incomplete shell around titania core in the nanocomposite.The measurement with a microelectrode system of three electrodes shows that the sample is electrocatalytic active to nitrophenol in basic solution at room temperature.Its peak potential is at0.988 V（vs saturated calomel electrode （SCE））,which is more negative than the peak potential,0.817 V（vs SCE）,of mesoporous monotungsten carbide, and its peak current is 8.809μA,which is higher than the peak current,4.058μA,of mesoporous monotungsten carbide.The hydrogen generation potential of the sample is at1.199 V（vs SCE）,which is more negative than that of pure nanosized monotungsten carbide at1.100 V（vs SCE）.These results show that the presence of titania in the sample can lower the peak potential of nitrophenol electrocatalysis and its hydrogen generation potential,and increase its peak current of nitrophenol electrocatalysis in basic solution at room temperature.This indicates a synergistic effect of titania and monotungsten carbide in electrocatalysis.展开更多
Ultrasonic treatment and hydrothermal method were applied in the traditional homogeneous precipitation for nano-TiO_2 preparation, which was used as carrier material for the production of honeycomb selective catalytic...Ultrasonic treatment and hydrothermal method were applied in the traditional homogeneous precipitation for nano-TiO_2 preparation, which was used as carrier material for the production of honeycomb selective catalytic reduction(SCR) catalyst. The influence rules of the two improved methods on characterization of TiO_2 samples, denitration activity and mechanical strength of honeycomb SCR catalyst samples were mainly focused on. The results indicate that the specific surface area, particle size and uniformity of TiO_2 samples are significantly improved by both of the ultrasonic and hydrothermal treatments compared with the traditional homogeneous precipitation. Also, the denitration activities of catalyst samples are enhanced by the two improved methods(the NO_x reduction ratio increases from 88.89% to 95.45% by ultrasonic homogeneous precipitation process, and to 94.12% by hydrothermal homogeneous precipitation process). On the other hand, because of good spherical shape and high particle distribution of TiO_2 sample from hydrothermal homogeneous precipitation process, the corresponding honeycomb catalyst samples get the best mechanical strength, which is even higher than that of the reference sample from commercial nano-TiO_2. So, it is concluded that the hydrothermal homogeneous precipitation can be a feasible and effective preparation method of TiO_2 carrier for the honeycomb SCR catalyst production.展开更多
A novel technology of in-situ coating Al2O3 on the surface of H4TiO4 was developed to prevent the aggregation of nano-TiO2 powders and improve the dispersibility and thermal stability in the way of forming a uniform c...A novel technology of in-situ coating Al2O3 on the surface of H4TiO4 was developed to prevent the aggregation of nano-TiO2 powders and improve the dispersibility and thermal stability in the way of forming a uniform coating layer. The heterogeneous nucleation was conducted to prepare the precursor of nano-TiO2 and then Al2O3 was coated on the surface of precursor. The effects of Al2O3 in-situ coating on the properties of nano-TiO2 were investigated. The results show that H4 TiO4 can be dispersed well under alkaline condition （pH 8. 5） and the heterogeneous nucleation can be controlled easily. The optimized uniform coating layer is obtained by adding 5 % （mass fraction ） and 10% of Al2O3 and the aggregation of nano-TiO2 powders is effectively inhibited and the dispersibility is obviously improved. The crystal sizes of TiO2 powders are 12.3, 11.4 and 8. 7 nm after coating 0, 5% and 10% of Al2O3 respectively. Al2O3 on the surface of particulates in amorphous phase could increase the thermal stability of nano-partieles after calcined at 550℃.展开更多
Antibacterial activity of boron-doped TiO2(B/TiO2) nano-materials under visible light irradiation and in the dark was investigated. A simple sol-gel method was used to synthesize TiO2 nano-materials. X-ray diffraction...Antibacterial activity of boron-doped TiO2(B/TiO2) nano-materials under visible light irradiation and in the dark was investigated. A simple sol-gel method was used to synthesize TiO2 nano-materials. X-ray diffraction pattern of B/TiO2 nano-materials represents the diffraction peaks relating to the crystal planes of TiO2(anatase and rutile). X-ray photoelectron spectroscopy result shows that part of boron ions incorporates into TiO2 lattice to form a possible chemical environment like Ti O B and the rest exist in the form of B2O3. The study on antibacterial effect of B/TiO2 nano-materials on fungal Candida albicans(ATCC10231), Gram-negative Escherichia coli(ATCC25922) and Gram-positive Staphylococcus aureus(ATCC6538) shows that the antibacterial action is more significant on Candida albicans than on Escherichia coli and Staphylococcus aureus. Under visible light irradiation, the antibacterial activity is superior to that in the dark.展开更多
The study of nano properties of PbSe （lead selenide） thin films deposited on TiO2 semi conductor film prepared by sol gel method was a new work destined to perfect the nano materials used in photovoltaic energy. The...The study of nano properties of PbSe （lead selenide） thin films deposited on TiO2 semi conductor film prepared by sol gel method was a new work destined to perfect the nano materials used in photovoltaic energy. The growth of the first group of the fihns （Set 1： P（9）） ＆ P（14）） was based on the decomposition of lead citrate and sodium selenosulphite in the presence of sodium citrate and sodium hydroxide with ammonia and triethalamine （TEA） acting as the complexing agents and P.H stabilizers; while in the second group （Set 2： Pc15~）, the reaction bath was made up of solutions of lead nitrate Pb（NO3）2, PVA （polyvinyl alcohol）, H20 （distilled water）, NH3 （ammonia）, sodium selenosulphite （Na2SeSO3） and Triethalamine [N（CH2CH2OH）], which was used as the complexing agent. The deposited materials were identified by X-ray diffraction. In addition, nano optical and morphological investigations were also performed. The sample P9 has the lowest absorbance of about 0.3 nm in the ultra-violet region. It was found that there was a reduction in the optical absorbance as the wavelength increases. The optical band gap shows a range of 1.26-2.00 eV with sample PcIs~ having the lowest direct band gap.展开更多
TiO2 nanoparticles have been synthesized by using a TiO2@NaCl core-shell structure as the precursor. The surface defects were well preserved by the NaCl shell, and therefore high oxygen adsorption capacity was observe...TiO2 nanoparticles have been synthesized by using a TiO2@NaCl core-shell structure as the precursor. The surface defects were well preserved by the NaCl shell, and therefore high oxygen adsorption capacity was observed. After the NaC1 shell was removed, the resulting pure TiO2 nanoparticles were of anatase phase and uniform size of around 20-24 nm. The presence of an abundance of surface defects contributes to the high photocatalytic activity of the synthesized materials, and the TiO： mate- rials obtained from the TiO2@NaCl precursor can be used as efficient photocatalysts for degradation of rhodamine B under UV light irradiation.展开更多
A facile method is presented for preparing TiO2/reduced graphite oxide （RGO） nanocomposites with phase-controlled TiO2 nanoparticles via redox reaction between the reductive titanium （III） precursor and graphite o...A facile method is presented for preparing TiO2/reduced graphite oxide （RGO） nanocomposites with phase-controlled TiO2 nanoparticles via redox reaction between the reductive titanium （III） precursor and graphite oxide （GO）, and a series of TiO2/RGO composites with various TiO2 phase compositions were obtained. In all the titania/RGO composites, the TiO2 nanoparticles were uniformly distributed on the surface of the RGO. The TiO2 consisted of anatase phase particles in the form of square-plates with edges less than 10 nm and the rutile phase nanorods in diameters less than 10 nm. The performances of the as-prepared TiO2/RGO composites were investigated on catalytically degrading phenol under visible light irradiation. The TiO2/RGO composites can effectively degrade phenol under visible light irradiation, and the phase composition of TiO2 in the composites significantly influences the activities of these catalysts.展开更多
文摘Metallic titanium was electrochemically dissoluted in absolute ethanol in the presence of Et4N· Br(as electro conductive additive),The electrolyte solution was then directly hydrolysized to obtain nanocrystalline TiO2.The powder obtained was calcined at 720℃ for 1 h.FT IR,Raman spectra,XRD and TEM were used to investigate the structure and particle size of the powder.Studies showed that the nanocrystalline TiO2 prepared by this method was of monocline structure with high textural stability and narrow size distribution of 10－ 20 nm,and its Raman spectra showed a shift of about 25 cm－ 1.The experiments also showed that the product yield could be improved by controlling the temperature under 50－ 60℃ ,selecting R4N· Br as conductive additive and preventing titanium anode from being passivated.The electrochemical dissolution of metal anode may be recommanded as a promising technique for the synthesis of nanomaterials.
基金supported by the National Natural Science Foundation of China(21373056)the Science and Technology Commission of Shanghai Municipality(13DZ2275200)~~
文摘In this article, we report the preparation of a three-dimensional（3D） interconnected mesoporous anatase TiO2-SiO2 nanocomposite. The nanocomposite was obtained by using an ordered two-dimensional（2D） hexagonal mesoporous anatase 70 TiO2-30 SiO2-950 nanocomposite（crystallized at 950 °C for 2 h） as a precursor, NaO H as an etchant of SiO2 via a ＂creating mesopores in the pore walls＂ approach. Our strategy adopts mild conditions of creating pores such as diluted NaO H solution, appropriate temperature and solid/liquid ratio, etc. aiming at ensuring the integrities of mesopores architecture and anatase nanocrystals. XRD, TEM and N2 sorption techniques have been used to systematically investigate the physico-chemical properties of the nanocomposites. The results show that the intrawall mesopores are highly dense and uniform（average pore size 3.6 nm）, and highly link the initial mesochannels in a 3D manner while retaining mesostructural integrity. There is no significant change to either crystallinity or size of the anatase nanocrystals before and after creating the intrawall mesopores. The photocatalytic degradation rates of rhodamine B（RhB, 0.303 min^–1） and methylene blue（MB, 0.757 min^–1） dyes on the resultant nanocomposite are very high, which are 5.1 and 5.3 times that of the precursor; even up to 16.5 and 24.1 times that of Degussa P25 photocatalyst, respectively. These results clearly demonstrate that the 3D interconnected mesopores structure plays an overwhelming role to the increments of activities. The 3D mesoporous anatase TiO2-SiO2 nanocomposite exhibits unexpected-high degradation activities to RhB and MB in the mesoporous metal oxide-based materials reported so far. Additionally, the nanocomposite is considerably stable and reusable. We believe that this method would pave the way for the preparation of other 3D highly interconnected mesoporous metal oxide-based materials with ultra-high performance.
文摘The effect of inhaled nano-TiO2 on lung histology and serum biochemical indexes is evaluated in healthy and adult Kunming mice（eight in each group）after exposure to TiO2 aerosols（1 500 mg/m3）in a sealed chamber.Another eight mice are exposed to indoor air to be served as a control group.Lung tissue and blood are collected after euthanizing the animals.The results show that lactate dehydrogenase（LDH）activity increases in all experimental groups.Alanine aminotransferase（ALT）activity and blood urea nitrogen（BUN）levels are increased in the group exposed to TiO2 aerosols for 28 d,and creatinine（Cr）levels are increased in 14 d and 28 d samples（P0.05）.No obvious changes are observed in other serum indexes.Lungs of mice exposed to 28 d exposure show significant but moderate increase in pulmonary inflammation,and many TiO2 particles are found in the interstitium of pulmonary alveoli.
基金Supported by the National Natural Science Foundation of China（21173018,20473009）
文摘The core-shell structured TiO2/SiO2 @Fe3O4 photocatalysts were prepared using Fe3O4 as magnetic core,tetraethoxysilane（TEOS） as silica source and tetrabutyl titanate（TBOT） as titanium sources.The as-obtained structure was composed of a SiO2@Fe3O4 core and a porous TiO2 shell.The diameter of SiO2@Fe3O4 core was about 205 nm with thickness of porous TiO2 of about 5-6 nm.The 9%TiO2/6%SiO2@Fe3O4 microspheres possess the highest BET surface area and the BJH pore volume,which are 373.5 m2.g-1 and 0.28 cm3.g-1,respectively.The 9%TiO2/6%SiO2@Fe3O4 photocatalyst exhibited an excellent performance for the degradation of methyl orange and methylene blue dyes.Two different dyes were completely decolorized in 60 min under UV irradiation.The photocatalytic activity and the amount of catalyst were almost not decrease after recycling for 6 times by using external magnetic field.
基金Supported by the National Natural Science Foundation of China（20476097） the Zhejiang Natural Science Foundation（Y4080209 Y406094）+1 种基金 the Science Plan of Zhejiang Province（2007F70039） the Scientific Starting Fund of Zhejiang University of Technology
文摘Monotungsten carbide and titania nanocomposite with core-shell（WC@TiO2）structure was prepared by a new approach of spray drying and reduction-carbonization reaction,with titania nanopowder and ammonium metatungstate as precursors,methane as carbon source,and hydrogen as reduction gas.The sample was characterized by X-ray diffraction,scanning electron microscope,high resolution transmission electron microscope and X-ray energy dispersion spectroscopy.The results show that its crystal phase is composed of brookite,tungsten and monotungsten carbide.The morphology of the sample particle is irregular sphere-like,with a diameter smaller than 100 nm.Its chemical components are titanium,tungsten,carbon and oxygen.Monotungsten carbide nanoparticles lie on the surface of titania core and form an incomplete shell around titania core in the nanocomposite.The measurement with a microelectrode system of three electrodes shows that the sample is electrocatalytic active to nitrophenol in basic solution at room temperature.Its peak potential is at0.988 V（vs saturated calomel electrode （SCE））,which is more negative than the peak potential,0.817 V（vs SCE）,of mesoporous monotungsten carbide, and its peak current is 8.809μA,which is higher than the peak current,4.058μA,of mesoporous monotungsten carbide.The hydrogen generation potential of the sample is at1.199 V（vs SCE）,which is more negative than that of pure nanosized monotungsten carbide at1.100 V（vs SCE）.These results show that the presence of titania in the sample can lower the peak potential of nitrophenol electrocatalysis and its hydrogen generation potential,and increase its peak current of nitrophenol electrocatalysis in basic solution at room temperature.This indicates a synergistic effect of titania and monotungsten carbide in electrocatalysis.
基金Project(201031)supported by the Environmental Protection Scientific Research of Jiangsu Province,ChinaProject(BE2010184)supported by the Technology Support Program of Jiangsu Province-Industrial Parts,China
文摘Ultrasonic treatment and hydrothermal method were applied in the traditional homogeneous precipitation for nano-TiO_2 preparation, which was used as carrier material for the production of honeycomb selective catalytic reduction(SCR) catalyst. The influence rules of the two improved methods on characterization of TiO_2 samples, denitration activity and mechanical strength of honeycomb SCR catalyst samples were mainly focused on. The results indicate that the specific surface area, particle size and uniformity of TiO_2 samples are significantly improved by both of the ultrasonic and hydrothermal treatments compared with the traditional homogeneous precipitation. Also, the denitration activities of catalyst samples are enhanced by the two improved methods(the NO_x reduction ratio increases from 88.89% to 95.45% by ultrasonic homogeneous precipitation process, and to 94.12% by hydrothermal homogeneous precipitation process). On the other hand, because of good spherical shape and high particle distribution of TiO_2 sample from hydrothermal homogeneous precipitation process, the corresponding honeycomb catalyst samples get the best mechanical strength, which is even higher than that of the reference sample from commercial nano-TiO_2. So, it is concluded that the hydrothermal homogeneous precipitation can be a feasible and effective preparation method of TiO_2 carrier for the honeycomb SCR catalyst production.
文摘A novel technology of in-situ coating Al2O3 on the surface of H4TiO4 was developed to prevent the aggregation of nano-TiO2 powders and improve the dispersibility and thermal stability in the way of forming a uniform coating layer. The heterogeneous nucleation was conducted to prepare the precursor of nano-TiO2 and then Al2O3 was coated on the surface of precursor. The effects of Al2O3 in-situ coating on the properties of nano-TiO2 were investigated. The results show that H4 TiO4 can be dispersed well under alkaline condition （pH 8. 5） and the heterogeneous nucleation can be controlled easily. The optimized uniform coating layer is obtained by adding 5 % （mass fraction ） and 10% of Al2O3 and the aggregation of nano-TiO2 powders is effectively inhibited and the dispersibility is obviously improved. The crystal sizes of TiO2 powders are 12.3, 11.4 and 8. 7 nm after coating 0, 5% and 10% of Al2O3 respectively. Al2O3 on the surface of particulates in amorphous phase could increase the thermal stability of nano-partieles after calcined at 550℃.
基金Supported by the National Natural Science Foundation of China(51090384)
文摘Antibacterial activity of boron-doped TiO2(B/TiO2) nano-materials under visible light irradiation and in the dark was investigated. A simple sol-gel method was used to synthesize TiO2 nano-materials. X-ray diffraction pattern of B/TiO2 nano-materials represents the diffraction peaks relating to the crystal planes of TiO2(anatase and rutile). X-ray photoelectron spectroscopy result shows that part of boron ions incorporates into TiO2 lattice to form a possible chemical environment like Ti O B and the rest exist in the form of B2O3. The study on antibacterial effect of B/TiO2 nano-materials on fungal Candida albicans(ATCC10231), Gram-negative Escherichia coli(ATCC25922) and Gram-positive Staphylococcus aureus(ATCC6538) shows that the antibacterial action is more significant on Candida albicans than on Escherichia coli and Staphylococcus aureus. Under visible light irradiation, the antibacterial activity is superior to that in the dark.
文摘The study of nano properties of PbSe （lead selenide） thin films deposited on TiO2 semi conductor film prepared by sol gel method was a new work destined to perfect the nano materials used in photovoltaic energy. The growth of the first group of the fihns （Set 1： P（9）） ＆ P（14）） was based on the decomposition of lead citrate and sodium selenosulphite in the presence of sodium citrate and sodium hydroxide with ammonia and triethalamine （TEA） acting as the complexing agents and P.H stabilizers; while in the second group （Set 2： Pc15~）, the reaction bath was made up of solutions of lead nitrate Pb（NO3）2, PVA （polyvinyl alcohol）, H20 （distilled water）, NH3 （ammonia）, sodium selenosulphite （Na2SeSO3） and Triethalamine [N（CH2CH2OH）], which was used as the complexing agent. The deposited materials were identified by X-ray diffraction. In addition, nano optical and morphological investigations were also performed. The sample P9 has the lowest absorbance of about 0.3 nm in the ultra-violet region. It was found that there was a reduction in the optical absorbance as the wavelength increases. The optical band gap shows a range of 1.26-2.00 eV with sample PcIs~ having the lowest direct band gap.
基金supported by the Engineering and Technology Research Center of Food Preservation,Processing and Safety Control of Liaoning Province,Food Safety Key Lab of Liaoning Province (LNSAKF2011027)Key Laboratory Project of Department of Education of Liaoning Province (2009s004)
文摘TiO2 nanoparticles have been synthesized by using a TiO2@NaCl core-shell structure as the precursor. The surface defects were well preserved by the NaCl shell, and therefore high oxygen adsorption capacity was observed. After the NaC1 shell was removed, the resulting pure TiO2 nanoparticles were of anatase phase and uniform size of around 20-24 nm. The presence of an abundance of surface defects contributes to the high photocatalytic activity of the synthesized materials, and the TiO： mate- rials obtained from the TiO2@NaCl precursor can be used as efficient photocatalysts for degradation of rhodamine B under UV light irradiation.
基金supported by the National Natural Science Foundation of China (20903105,21073202)the Ministry of Science and Technology of China (973 project,2009CB930802)the Chinese Academy of Sciences (KJCX2.YW.H16)
文摘A facile method is presented for preparing TiO2/reduced graphite oxide （RGO） nanocomposites with phase-controlled TiO2 nanoparticles via redox reaction between the reductive titanium （III） precursor and graphite oxide （GO）, and a series of TiO2/RGO composites with various TiO2 phase compositions were obtained. In all the titania/RGO composites, the TiO2 nanoparticles were uniformly distributed on the surface of the RGO. The TiO2 consisted of anatase phase particles in the form of square-plates with edges less than 10 nm and the rutile phase nanorods in diameters less than 10 nm. The performances of the as-prepared TiO2/RGO composites were investigated on catalytically degrading phenol under visible light irradiation. The TiO2/RGO composites can effectively degrade phenol under visible light irradiation, and the phase composition of TiO2 in the composites significantly influences the activities of these catalysts.
