The two-dimensional infiltration experiment was carried out by means of digital image technology.The evolution process of the wetting body was described.The wetted front distance and the time show a very significant p...The two-dimensional infiltration experiment was carried out by means of digital image technology.The evolution process of the wetting body was described.The wetted front distance and the time show a very significant power function relationship.The horizontal wetted distance is larger than the vertical wetted distance in the initial stage.Then,the vertical distance of the wetted body gradually approaches to the horizontal distance.The infiltration distance decreases as the content of fine particles increases.The wetted front migration rate curve shows a three-stage change law,and it increases with the increase of coarse particle content.The directional velocity ratio is defined.The initial value of horizontal infiltration rate is larger than that of vertical one,and then the vertical infiltration rate is gradually close to the horizontal value.The empirical relationship between the characteristic particle size and the stable infiltration rate is established,which provides a theoretical basis for the prediction of the stable infiltration rate in in-situ leaching.展开更多
To study the gas-solid flow characteristics in a chemical looping combustion system integrated with a moving bed air reactor,a 3D full-loop numerical model was established using the Eulerian-Eulerian approach integrat...To study the gas-solid flow characteristics in a chemical looping combustion system integrated with a moving bed air reactor,a 3D full-loop numerical model was established using the Eulerian-Eulerian approach integrated with the kinetic theory of granular flow.The solid circulation mechanism and gas leakage performance were studied in detail.The simulation results showed that in the start-up process,the solid circulation rate first increased to approximately 5 kg/s and then dropped to approximately 1.2 kg/s;this observation was related to the dynamic control of the pressure distribution.In this system,the gas leakage between the inertial separator,upper air reactor,and lower air reactor was restrained by adjusting the pressure difference,thus obtaining optimal gas flow paths.When the pressures at the outlets of the inertial separator,upper air reactor,and lower air were 7.4,11.0,and 14.6 kPa,respectively,the gas leakage ratio was less than 1%in the system.展开更多
The concentration of suspended solids in the secondary effluent often varies widely, leading to frequent adjustment of the UV dosage to meet the disinfection criterion. In addition, a desired disinfection rate is diff...The concentration of suspended solids in the secondary effluent often varies widely, leading to frequent adjustment of the UV dosage to meet the disinfection criterion. In addition, a desired disinfection rate is difficult to achieve sometimes. The authors studied the particle size distribution, contribution of particle-associated Fecal Coliform (F.C.), and their influences on UV disinfection. A combined disinfection process (chlorination with a subsequent UV disinfection) was tested to improve the disinfection effect. The results indicated that the content of suspended solids, especially that of large particles, has a strong impact on UV disinfection efficiency; D>10 μm particles associated F.C. are difficult to be disinfected and are the main part of the tailings of F.C. inactivation curves. Pre-chlorination could decrease the number of particles in the secondary effluent and transform the large particles into small ones, reducing the influence of particles on UV disinfection and enhancing the resistance ability of the combined process to particle loading.展开更多
基金Projects(51764014,11902127)supported by the National Natural Science Foundation of ChinaProject(201810407004)supported by the National Undergraduate Innovation Training Program of ChinaProject(GJJ180457)supported by Jiangxi Education Department,China。
文摘The two-dimensional infiltration experiment was carried out by means of digital image technology.The evolution process of the wetting body was described.The wetted front distance and the time show a very significant power function relationship.The horizontal wetted distance is larger than the vertical wetted distance in the initial stage.Then,the vertical distance of the wetted body gradually approaches to the horizontal distance.The infiltration distance decreases as the content of fine particles increases.The wetted front migration rate curve shows a three-stage change law,and it increases with the increase of coarse particle content.The directional velocity ratio is defined.The initial value of horizontal infiltration rate is larger than that of vertical one,and then the vertical infiltration rate is gradually close to the horizontal value.The empirical relationship between the characteristic particle size and the stable infiltration rate is established,which provides a theoretical basis for the prediction of the stable infiltration rate in in-situ leaching.
基金The National Natural Science Foundation of China(No.51976034)China Postdoctoral Science Foundation(No.2020M681455)+2 种基金the National Key R&D Program of China(No.2018YFC1901200)Jiangsu Planned Projects for Postdoctoral Research Fundsthe Fundamental Research Funds for the Central Universities.
文摘To study the gas-solid flow characteristics in a chemical looping combustion system integrated with a moving bed air reactor,a 3D full-loop numerical model was established using the Eulerian-Eulerian approach integrated with the kinetic theory of granular flow.The solid circulation mechanism and gas leakage performance were studied in detail.The simulation results showed that in the start-up process,the solid circulation rate first increased to approximately 5 kg/s and then dropped to approximately 1.2 kg/s;this observation was related to the dynamic control of the pressure distribution.In this system,the gas leakage between the inertial separator,upper air reactor,and lower air reactor was restrained by adjusting the pressure difference,thus obtaining optimal gas flow paths.When the pressures at the outlets of the inertial separator,upper air reactor,and lower air were 7.4,11.0,and 14.6 kPa,respectively,the gas leakage ratio was less than 1%in the system.
文摘The concentration of suspended solids in the secondary effluent often varies widely, leading to frequent adjustment of the UV dosage to meet the disinfection criterion. In addition, a desired disinfection rate is difficult to achieve sometimes. The authors studied the particle size distribution, contribution of particle-associated Fecal Coliform (F.C.), and their influences on UV disinfection. A combined disinfection process (chlorination with a subsequent UV disinfection) was tested to improve the disinfection effect. The results indicated that the content of suspended solids, especially that of large particles, has a strong impact on UV disinfection efficiency; D>10 μm particles associated F.C. are difficult to be disinfected and are the main part of the tailings of F.C. inactivation curves. Pre-chlorination could decrease the number of particles in the secondary effluent and transform the large particles into small ones, reducing the influence of particles on UV disinfection and enhancing the resistance ability of the combined process to particle loading.
