二聚乙烯酮与醇在酸、碱催化下反应规律的探讨

研究了二聚乙烯酮与不同结构的醇在酸、碱催化下的反应规律，并用烷基电子效应的新观点解释了这个规律。

Effect of Added Poly (vinyl pyrrolidone) during Condensation on Properties of Poly(p-phenylene terephthalamide)Pulp

Poly(p-phenylene terephthalamide)(PPTA)pulp was prepared by polycondensation of the p-phenylene diamine(PPDA)with terephthaloyl chloride(TPC)in the completely anhydrous solvent system of N-methyl pyrrolidone(NMP)having calcium chloride,in the presence of poly(vinyl pyrrolidone)(PVP)having a viscosity average molecular weight lower than 40 000.It was confirmed that the polycondensation could be accelerated,the inherent viscosity of the polymer could be increased,and the polymers could be fibrillated more easily by the addition of the PVP.FTIR and X-ray spectra proved that PVP had not combined into molecular chains of the resultant PPTA pulps.The morphology of the resultant pulps,the effect of viscosity average molecular weight,amount and adding mode of PVP on inherent viscosity,specific surface area,and mean length of the resultant pulps were discussed in detail.And the friction and wear properties of the compound reinforced by the resultant pulps were simply investigated.

Study on Drying Process of 3Al_2O_3·2SiO_2 Mullite Gel

Monophasic mullite gel with composition 3Al2O3·2SiO2 was prepared by the sol-gel method using aluminium nitrate nonahydrate, aluminium-tri-isopropoxide, and tetraethylorthosili-cate as reagents. Gels with different drying control chemical additives(DCCAs) and polyvinylpyrrolidone(PVP) as spinning assistant were dried at several temperatures. The influences of temperature, DCCAs and PVP in the drying process were investigated. N,N-dimethylformamide(DMF) was the optimum DCCA at 70℃ in the drying process. PVP decreased the solvent volatilization speed and prevented gel crack to a certain extent. FTIR results revealed that free water, ethanol, and isopropanol were completely removed by the drying procedure.

High-yield preparation of robust gold nanoshells on silica nanorattles with good biocompatiblity

Although gold nanoshells are widely considered as one of the promising photothermal nanomaterials used for biomedicine, the high cost, low yield and poor stability severely limit their potential application in clinical trials.Herein, robust gold nanoshells on silica nanorattles(GSNs)were easily prepared in a high yield by an improved seedmediated method employing polyvinylpyrrolidone(PVP) as a stabilizing and capping agent. The present method is very simple, effective and reproducible and can well control the growth process of gold nanoshells. The as-prepared GSNs have a narrow size distribution(<10 % in standard deviation). Furthermore, the utilization rate of Au in the solution used for the growth of gold nanoshells increases by 70 %than that in previous method. The resultant GSNs have a good structural stability after placing over 6 months due to the protection of PVP. More importantly, in vivo and in vitro toxic studies indicate that the GSNs have good biocompatibility. We believe that our preparation method will remarkably promote the use of gold nanoshells for biomedicine.

Influence of surfactants on the morphology and photocatalytic activity of Bi_2WO_6 by hydrothermal synthesis

The flower-like microsphere Bi2WO6 with an average diameter of 2.5 μm is synthesized by a simple hydrothermal method in the presence of surfactant sodium dodecyl sulfate （SDS） or polyvinylpyrrolidone （PVP）. The crystalline phase, compositions, morphology, microstructure, surface area and band gap energy of the Bi2WO6 are characterized by X-ray diffraction, X-ray energy-dispersive spectrum, scanning electron microscopy, transmission electron microscopy and absorption spectra. It is found that surfactant has a significant influence on the microstructure and properties of the samples. The surfaetant SDS en- hances the surface area and photocatalytic activity of Bi2WO6, while the surfactant PVP has an opposite effect. Under Xe lamp irradiation, the Bi2WO6 sample prepared in the presence of SDS can degrade dye Rhodamine B （RhB） effectively.

Synthesis and adsorptivity of acryloylmorpholine resin to various fission product elements in nitric acid media

A novel silica-supported resin with a cyclic monoamide of polymerized 4-acryloylmorpholine(Silica-AM) was synthesized, and adsorptivity to metal ions of major fission products(FP) was examined in HNO3 and HCl solutions. Silica-AM has a carbonyl oxygen atom outside of the 6-membered morpholine ring, and a cyclic structure that is different than other cyclic monoamide resins we have studied. These include polyvinylpolypyrrolidone(PVPP) and poly-N-vinyl-ε-caprolactam(VEC), both of which have coordinative carbonyl groups included in the ring. Silica-AM was similar to a cyclic monoamide we have reported because it exhibited adsorption to Pd(Ⅱ) and Re(VⅡ) in HNO3 of a particularly low concentration range. Silica-AM has an ether oxygen atom included in the ring as well. Considering the difference in the chemical structures of Silica-AM and other cyclic monoamide resins, it was suggested that oxygen atoms in the carbonyl group and in ether may be main contributors to Silica-AM's respective adsorptions to Pd(Ⅱ) and Re(VⅡ), and Mo(VI) and Zr(IV). Our results imply that the contribution of the two types of oxygen atoms to adsorption is more observable in an HCl system. The contribution of the ether oxygen atom to the adsorption of Pd(Ⅱ) was also suggested from our study on crystal prepared from 4-acetylmorpholine and palladium nitrate.