乙炔二聚催化反应的最佳工艺条件研究

本文采用正交实验设计,通过三十三次实验,详细地考察了氯丁橡胶生产过程中的关键反应——乙炔二聚催化反应在Nieuwland催化剂中的最佳反应条件与最佳工艺条件,并讨论了影响乙炔二聚催化反应的工程因素及其规律性。

乙炔二聚催化反应的宏观动力学研究

1 前言乙炔在Nieuwland催化剂中的二聚催化反应是氯丁橡胶(CR)生产过程中的关键反应,其主要产物乙烯基乙炔(MVA)是生产CR单体——氯丁二烯的主要原料之一。据调查,国内现有的三家氯丁橡胶厂几乎都处于亏损生产状态,严重的每年亏损达400万元人民币。

乙烯催化二聚制丁烯－1技术进展

乙烯催化二聚制丁－１技术是当今聚烯烃工业中具有重要意义的工业过程。介绍了４种竞争发展的新工艺及催化剂研究的进展，并对各新工艺的经济性进行了评价。

γ-Al_2O_3载体改性对环己酮二聚体脱氢合成邻苯基苯酚催化剂性能的影响

研究了利用金属氧化物进行载体γ-Al2O3改性对0.5%Pt-5%K2O/γ-Al2O3催化剂在环己酮二聚脱氢合成邻苯基苯酚反应中催化性能的影响。以La2O3、Ce2O3、MgO和CaO对γ-Al2O3栽体进行改性,比较了4种金属氧化物对生成邻苯基苯酚收率的影响。结果表明,以CaO改性的催化剂可使邻苯基苯酚的收率显著提高。通过对使用CaO改性的条件进行研究,确定了最佳改性条件:CaO用量为γ-Al2O3质量的20%,焙烧温度600℃,焙烧时间5h。以改性γ-Al2O3为载体制备的催化剂合成邻苯基苯酚收率达95.58%。利用XRD、XPS、H2-TPR和NH3-TPD对催化剂进行了表征,并结合催化剂的评价结果,对使用CaO进行载体改性后邻苯基苯酚收率提高的原因进行了探讨。

甲烷在钯基催化剂上脱氢的分子模拟

为探明甲烷在钯基二聚体催化剂上脱氢反应过程的微观机理,对甲烷燃烧催化剂的设计与使用提供指导。在M06L/6-311++G(d,p)+SDD//M06L/6-311G(d,p)+LANL2DZ基组水平上,采用密度泛函理论(DFT)对甲烷在钯基二聚体催化剂(Pd2、PdPt和PdNi)上的脱氢过程进行了研究。对比了甲烷在催化剂Pd2、PdPt和PdNi上反应的能垒(Eb)、活化能(Ea)及反应速率常数(k),结果表明:CH2→CH是甲烷在二聚体Pd2反应的速率控制步骤(RDS),而CH3→CH2是催化剂PdPt和PdNi反应的RDS;钯基二聚体催化剂对甲烷脱氢的催化活性顺序为PdPt>Pd2>PdNi;抗积炭性能顺序为PdNi>Pd2>PdPt。PdPt适用于要求催化效率较高的项目,而抗积炭性能较好的PdNi催化剂可用于大型工业催化。

己二腈生产技术进展及展望

本文介绍了己二腈主要的生产技术路线,包括己二酸催化氨化法、丙烯腈二聚法、丁二烯法和己内酰胺法,并对这四种工艺路线进行了优缺点的对比分析。此外,还对国内己二腈的研究及生产现状进行了整理总结,并提出了今后己二腈生产技术的研究方向和市场前景。

Syntheses,crystal structures,and catalytic properties of three zinc(Ⅱ),cobalt(Ⅱ)and nickel(Ⅱ)coordination polymers constructed from 5⁃(4⁃carboxyphenoxy)nicotinic acid

Three zinc(Ⅱ),cobalt(Ⅱ),and nickel(Ⅱ)coordination polymers,namely[Zn(μ^(3-)cpna)(μ-dpea)_(0.5)]_(n)(1),[Co(μ^(3-)cpna)(μ-dpey)_(0.5)]_(n)(2),and[Ni(μ^(3-)cpna)(μ-dpey)_(0.5)(H_(2)O)]_(n)(3),have been constructed hydrothermally using H_(2)cpna(5-(4-carboxyphenoxy)nicotinic acid),dpea(1,2-di(4-pyridyl)ethane),dpey(1,2-di(4-pyridyl)ethylene),and zinc,cobalt,and nickel chlorides at 160℃.The products were isolated as stable crystalline solids and were characterized by IR spectra,elemental analyses,thermogravimetric analyses,and single-crystal X-ray diffraction analyses.Single-crystal X-ray diffraction analyses revealed that three compounds crystallize in the triclinic system,space group P1.Compounds 1-3 show 2D layer structures.The catalytic activities in the Knoevenagel condensation reaction of these compounds were investigated.Compounds 1 and 2 exhibit effective catalytic activities in the Knoevenagel condensa-tion reaction at room temperature.For this reaction,various parameters were optimized,followed by the investiga-tion of the substrate scope.CCDC:2335676,1;2335677,2;2335678,3.

Nickel catalysts with asymmetric steric hindrance for ethylene polymerization

α-Diimide catalysts have attracted widespread attention due to their unique chain walking characteristics.A series ofα-diimide nickel/palladium catalysts with different electronic effects and steric hindrances were designed and synthesized for olefin polymerization.In this work,we synthesized a series of asymmetricα-diimide nickel complexes with different steric hindrances and used them for ethylene polymerization.These nickel catalysts have high ethylene polymerization activity,up to 6.51×10^(6)g·mol^(−1)·h^(−1),and the prepared polyethylene has a moderate melting point and high molecular weight(up to 38.2×10^(4)g·mol^(−1)),with a branching density distribution between 7 and 94 branches per 1000 carbons.More importantly,the polyethylene prepared by these catalysts exhibits excellent tensile properties,with strain and stress reaching 800%and 30 MPa,respectively.

Supported Ziegler-Natta catalysts from MgCl_(2)·nROH precursors and its catalytic behaviors for diene copolymerization

Heterogeneous TiCl4/MgCl_(2) type Ziegler-Natta(Z-N)catalysts with unique advantages like low cost,high activity,high stereoregularity and pretty particle morphology,contribute to more than 130 Mt polyolefin large-scale production.However,most researches related with heterogeneous Z-N catalysts focused onα-olefin polymerizations like ethylene,propylene,etc.

新型脱碳木脂素类化合物合成方法与肿瘤抑制活性研究

利用Mn(Ⅱ)/Co(Ⅱ)/PhP(O)HOR/O2新催化体系合成了一系列新型脱碳木脂素类化合物(2a～2g),并采用MTT比色实验法,研究了所合成化合物体外抗肿瘤抑制活性.分别对人乳腺癌细胞(MCF-7),人肝癌细胞(Bel-7402),人肺癌(A549)和人子宫颈癌细胞(Hela)进行检测.结果表明:化合物2a～2g对4种癌细胞均有较强的抑制作用,尤其是对人肝癌细胞Bel-7402的抑制效果明显,其中化合物2b显示出比相同条件下紫杉醇更好地抗癌抑制活性(IC50:18.9μg/mL),说明所合成的芳基烯二聚化合物2b具有更好的应用前景。

Effect of TPB on curing reaction of HTPB-TDI

Catalysis effect of triphenyl bismuth （TPB） on kinetics of hydroxyl terminated polybutadiene-toluene diisocyanate （HTPB-TDI） curing reaction was studied by non-isothermal differential scanning calorimetry （DSC）. The characteristic temperature of curing system was measured for calculating kinetic parameters and establishing curing reaction kinetic equations. The results show that activation energy （Ea） of uncatalyzed HTPB-TDI curing system is 51.29 kJmol-1, and TPB decreases Ea to 46.43 kJ＇mol-1. Catalyst lowers reaction temperature and shortens curing time through decreasing ac- tivation energy of curing reaction and accelerating reaction rate. TPB can increase the reaction rate at 27 ℃ to the value of uncatalyzed system at 80 ℃. The catalytic activity reaches the maximum when concentration is 0.5 %.

Tri(4-methoxybenzyloxyl)(pentamethylcyclopentadienyl)titanium/Modified MAO Catalyzed Polymerization of 1-Butene

Tri(4-methoxy-1-benzyloxyl)(pentamethylcyclopentadienyl)titanium(Cp*Ti(OBzOCH3)3) in conjunction with modified methylalumoxane(mMAO) was an efficient catalyst for the living polymerization of butene-1. The steric and highly electron-releasing nature of the catalyst was probably responsible for the resulting polymers with high molecular weight and narrow molecular weight distribution(Mw/Mn=1.25 to 1.36). The effects of polymerization conditions on the catalytic activity, molecular weight and stereo-regularity of the products were investigated in detail. Especially, the content of TMA in MAO used in polymerization of butene-1 had a profound influence on polymer microstructure. The structural properties of the polybutene-1 product were characterized by 13 C NMR, GPC, DSC and WAXD. The results indicated that the polybutene-1 was isotacticity-rich(at 0 ℃, [mmmm] reached up to 60.3%) and the relative content of methylene pentad sequences [mmmm] of the polymer increased with a decreasing temperature.

LIGAND EFFECT OF CATALYTIC SYSTEM WCl_6-Et_2Al FOR RING OPENING METATHESIS POLYMERIZATION OF DICYCLOPENTADIENE

Ligand effect of the catalytic system WCl6-Et2AlCl for ring opening metathesis polymerization (ROMP) of dicyclopentadiene (DCPD) was investigated. The experimental results show that adding sterically hindered phenol-2. 6-di-tert-butylcresylol(DTBC) in the catalytic system not only can obviously increase the monomer conversion of polymerization but also improve the mechanical properties, such as notched impact strength (NIS), tensile strength (TS) ect. 5 of the synthesized polyicycolpentadiene (PDCPD). A similar effect can be observed by using a sterically hindered polymeric phenol - linear phenol formaldehyde resin (LPF) as a ligand.

Kinetic studies on the dimerization of isobutene with Ni/Al_2O_3 as a catalyst for reactive distillation process

Isooctane is a promising gasoline additive that could be produced by dimerization of isobutene(IB) with subsequent hydrogenation.In this work,the dimerization of IB has been carried out in a batch reactor over a temperature range of 338-383 K in the presence of laboratory prepared Ni/Al_2O_3 as a catalyst and n-pentane as solvent.The influence of various parameters such as temperature,catalyst loading and initial concentration of IB was examined.A Langmuir-Hinshelwood kinetic model of IB dimerization was established and the parameters were estimated on the basis of the measured data.The feasibility of oligomerization of IB based on the reactive distillation was simulated in ASPEN PLUS using the kinetics developed.The simulation results showed that the catalyst of Ni/Al_2O_3 had higher selectivity to diisobutene(DIB) and slightly lower conversion of IB than ion exchange resin in the absence of polar substances.

Fast electron transfer and enhanced visible light photocatalytic activity by using poly-o-phenylenediamine modified AgCl/g-C_3N_4 nanosheets

Exfoliation of bulk graphitic carbon nitride(g‐C3N4)into two‐dimensional(2D)nanosheets is one of the effective strategies to improve its photocatalytic properties so that the 2D g‐C3N4 nanosheets(CN)have larger specific surface areas and more reaction sites.In addition,poly‐o‐phenylenediamine(PoPD)can improve the electrical conductivity and photocatalytic activity of semiconductor materials.Here,the novel efficient composite PoPD/AgCl/g‐C3N4 nanosheets was first synthesized by a precipitation reaction and the photoinitiated polymerization approach.The obtained photocatalysts have larger specific surface areas and could achieve better visible‐light response.However,silver chloride(AgCl)is susceptible to agglomeration and photocorrosion.The PoPD/AgCl/CN composite exhibits an extremely high photocurrent density,which is three times that of CN.Obviously enhanced photocatalytic activities of PoPD/AgCl/g‐C3N4 are revealed through the photodegradation of tetracycline.The stability of PoPD/AgCl/CN is demonstrated based on four cycles of experiments that reveal that the degradation rate only decreases slightly.Furthermore,.O2^-and h+are the main active species,which are confirmed through a trapping experiment and ESR spin‐trap technique.Therefore,the prepared PoPD/AgCl/CN can be considered as a stable photocatalyst,in which PoPD is added as a charge carrier and acts a photosensitive protective layer on the surface of the AgCl particles.This provides a new technology for preparing highly stable composite photocatalysts that can effectively deal with environmental issues.

Novel hydrazine-bridged covalent triazine polymer for CO_2 capture and catalytic conversion

Carbon dioxide（CO_2） capture and catalytic conversion has become an attractive and challenging strategy for CO_2 utilization since it is an abundant, inexpensive, and renewable C1 resource and a main greenhouse gas. Herein, a novel hydrazine-bridged covalent triazine polymer（HB-CTP） was first designed and synthesized through simple polymerization of cyanuric chloride with 2,4,6-trihydrazinyl-1,3,5-triazine. The resultant HB-CTP exhibited good CO_2 capture capacity（8.2 wt%, 0 °C, and 0.1 MPa） as well as satisfactory recyclability after five consecutive adsorption-desorption cycles. Such a polymer was subsequently employed as a metal-free heterogeneous catalyst for the cyclo-addition of CO_2 with various epoxides under mild and solvent-free conditions,affording cyclic carbonates with good to excellent yields（67%–99%） and high functional-group tolerance. The incorporation of hydrazine linkages into HB-CTP＇s architecture was suggested to play the key role in activating epoxides through hydrogen bonding. Moreover, HB-CTP can be reused at least five times without significant loss of its catalytic activity.

A New Method for Dissolving MgCl_2 for Preparation of Ziegler-Natta Propylene Polymerization Catalysts

A new method for the activation of crystalline magnesium chloride by polyethylene glycol was described. Polyethylene glycol could solubilize crystalline magnesium chloride. The resulting solution was used for the preparation of Ziegler-Natta propylene polymerization catalysts. These catalysts are highly active and stereospecific. The relationship between the catalytic activity and the Al/Ti ratio was studied in detail.

Tunable activity of electrocatalytic CO dimerization on strained Cu surfaces:Insights from ab initio molecular dynamics simulations

Controlling catalytic activities through surface strain engineering remains a hot topic in electrocatalysis studies.Herein,ab initio molecular dynamics(AIMD)simulation associated with free energy sampling technology were performed to study the energetics of the key step of producing C2 products in electrocatalytic reduction of CO or CO_(2),i.e.CO dimerization,on strained Cu(100)with an explicit aqueous solvent model.It is worth mentioning that when compressive strain reaches a certain extent,the surface of Cu(100)will undergo reconstruction.We showed that,from tensile to compressive strain,the free energy barrier of CO dimerization decreased,suggesting that the activity of CO dimerization increases.It was also found that some of the reconstructed surfaces showing the lowest free energy barriers but might be less stable can be stabilized in the presence of adsorbed O or CO.Upon detailed quantitative analysis on the charges of surface Cu atoms,we found that the free energy barriers were strongly correlated with the charge of Cu atoms where the OCCO intermediate adsorbs.When the surfaces structures of Cu(100)were altered under compressive strain,the electronic structure of surface Cu atoms was monitored and thus the activity of electrocatalytic CO dimerization can be tuned.

Molecular Dynamics Insights into Electron-Catalyzed Dissociation Repair of Cyclobutane Pyrimidine Dimer

Excess electrons are not only an important source of radiation damage,but also participate in the repair process of radiation damage such as cyclobutane pyrimidine dimer(CPD).Using ab initio molecular dynamics(AIMD)simulations,we reproduce the single excess electron stepwise catalytic CPD dissociation process in detail with an emphasis on the energy levels and molecular structure details associated with excess electrons.On the basis of the AIMD simulations on the CPD aqueous solution with two vertically added excess electrons,we exclude the early-proposed[2+2]-like concerted synchronous dissociation mechanism,and analyze the difference between the symmetry of the actual reaction and the symmetry of the frontier molecular orbitals which deeply impact the mechanism.Importantly,we propose a new model of the stepwise electron-catalyzed dissociation mechanism that conforms to the reality.This work not only provides dynamics insights into the excess electron catalyzed dissociation mechanism,but also reveals different roles of two excess electrons in two bond-cleavage steps(promoting versus inhibiting).