To integrate different renewable energy resources effectively in a microgrid, a configuration optimization model of a multi-energy distributed generation（DG） system and its auxiliary equipment is proposed. The model...To integrate different renewable energy resources effectively in a microgrid, a configuration optimization model of a multi-energy distributed generation（DG） system and its auxiliary equipment is proposed. The model mainly consists of two parts, the determination of initial configuration schemes according to user preference and the selection of the optimal scheme. The comprehensive evaluation index（CEI）, which is acquired through the analytic hierarchy process（AHP） weight calculation method, is adopted as the evaluation criterion to rank the initial schemes. The optimal scheme is obtained according to the ranking results. The proposed model takes the diversity of different equipment parameters and investment cost into consideration and can give relatively suitable and economical suggestions for system configuration.Additionally, unlike Homer Pro, the proposed model considers the complementation of different renewable energy resources, and thus the rationality of the multi-energy DG system is improved compared with the single evaluation criterion method which only considers the total cost.展开更多
With the evolution of network technologies, the deficiencies of TCP protocol are becoming more and more distinct. The new TCP implementation, called Receiver Advertisement Based TCP (TCP-Rab) proposed here to eliminat...With the evolution of network technologies, the deficiencies of TCP protocol are becoming more and more distinct. The new TCP implementation, called Receiver Advertisement Based TCP (TCP-Rab) proposed here to eliminate these deficiencies, adopts two basic mechanisms: (1) Bandwidth Estimation and (2) Immediate Recovery. Bandwidth estimation is carried out at the receiver, and the result is sent back to the sender via the acknowledgments. Immediate Recovery guarantees high performance even in lossy link. Rab can distinguish the reason for packet loss, and thus adopt appropriate recovery strategy. For loss by network congestion, it will back off its congestion window, and for loss by link errors, it will recover the congestion window immediately. Simulations indicated that Rab has superiority over other TCP implementations.展开更多
The effect of hydroxamic acid starch (HAS) and hydroxamic acid polyacrylamide (HPAM) on the flotation of diaspore and kaolinite was investigated by flotation test. It is found that HAS depresses diaspore but activates...The effect of hydroxamic acid starch (HAS) and hydroxamic acid polyacrylamide (HPAM) on the flotation of diaspore and kaolinite was investigated by flotation test. It is found that HAS depresses diaspore but activates kaolinite in acidic pulp,while HPAM activates both diaspore and kaolinite in the pH range of 2.010.5. The measurement of zeta potential shows that both HAS and HPAM can increase zeta potential of negatively charged diaspore, which indicates the existence of chemical bonding or hydrogen bonding between the reagents and diaspore. By covering the collector dodecyl amine(DDA) on diaspore surface,HAS increases the hydrophilicity of minerals and depresses the flotation of diaspore,however HPAM activates the flotation of diaspore by increasing the adsorption of DDA on diaspore surface.展开更多
A Constrained Interpolation Profile （CIP）-based model is developed to predict the mooring force of a two-dimensional floating oil storage tank under wave conditions, which is validated against to a newly performed e...A Constrained Interpolation Profile （CIP）-based model is developed to predict the mooring force of a two-dimensional floating oil storage tank under wave conditions, which is validated against to a newly performed experiment. In the experiment, a box-shaped floating oil storage apparatus is used. Computations are performed by an improved CIP-based Cartesian grid model, in which the THINC/SW scheme （THINC： tangent of hyperbola for interface capturing; SW： Slope Weighting）, is used for interface capturing. A multiphase flow solver is adopted to treat the water-air-body interactions. The Immersed Boundary Method （IBM） is implemented to treat the body surface. Main attention is paid to the sum force of mooring line and velocity field around the body. It is found that the sum force of the mooring line increases with increasing wave amplitude. The body suffers from water wave impact and large body motions occur near the free surface. The vortex occurs near the sharp edge, i.e., the sharp bottom comers of the float- ing oil storage tank and the vortex shedding can be captured by the present numerical model. The present model could be further improved by including turbulence model which is currently under development. Comparison between the computational mooring forces and the measured mooring forces is presented with a reasonable agreement. The developed numerical model can predict the mooring line forces very well.展开更多
This study was to evaluate the high yielding and stability of candidate cultivars, depict the adaptive planting region, analyze trial location discrim-ination ability and representativeness, as wel as identify the ide...This study was to evaluate the high yielding and stability of candidate cultivars, depict the adaptive planting region, analyze trial location discrim-ination ability and representativeness, as wel as identify the ideal cultivar and trial location, with the aim to provide theory background for cultivar selection and rea-sonable scheme of test location in Jiangsu Province. [Method] The GGE biplot method was used to analyze the lint cotton yield of 12 experimental genotypes in the 6 test locations （three replicates in each） of the cotton regional trial in Jiangsu Province in 2013. [Result] The effects of genotype （G）, environment （E）, and geno-type by environment interaction （G＆#215;E） on lint cotton yield were al highly significant （P〈0.01）, which made it necessary to further explore the specific pattern of geno-type by environment interaction. Jinmian118 （G4） and SF3303 （G5） were the best ideal genotypes screened by the ＂ideal cultivar＂ and ＂ideal location＂ view of GGE biplot, and the ordination of test sites based on the ideal index were in the order of Dafeng （DF）, Yanliang （YL）, Liuhe （LH）, Dongtai （DT）, Yancheng （YC）, and Nantong （NT）, among which NT was relatively weak in representing of the whole target cot-ton planting region in Jiangsu Province. The ＂similarity among locations＂ view of GGE biplot clustered al trial locations into one group, showing that the test sites in the cotton planting region in Jiangsu Province were in the same mega-environment. The ＂which-won-where＂ view of GGE biplot indicated that cotton cultivar Jinmian118 （G4） was the most appropriate cultivar in the homogeneous cotton planting region in Jiangsu Province. [Conclusion] Among the candidate cultivars, Jinmian118 and SF3303 were identified as the most ideal cultivars in this set of conventional cotton regional trial in Jiangsu Province; the test site of Dafeng ranked the first out of al locations in terms of discrimination and representativeness, and al test locations were clustered into the same mega-environmet, which indicated the high efficiency of cultivar selection in the cotton regional trial in Jiangsu Province.展开更多
This paper presents some new dynamic interaction analysis approaches for square or non-square systems and a pairing evaluation method. For square stable systems, an open-loop approach is proposed, which features the t...This paper presents some new dynamic interaction analysis approaches for square or non-square systems and a pairing evaluation method. For square stable systems, an open-loop approach is proposed, which features the tradeoff between the contributions of response time constant and delay time to relative gain. For non-square stable systems, an extension from the proposed open-loop approach for square systems is presented and the corresponding pairing procedure is given. No interaction analysis approach is perfect for all systems, so any recommended pairing needs to be examined. An evaluation method is proposed in closed-loop with optimal controllers for each loop and whether the pairing is appropriate can be evaluated through testing if the equivalent relative gain is within defined scope. The advantages and effectiveness of proposed interaction analysis approaches and pairing evaluation method are highlighted via several examples of industrial processes.展开更多
This paper is concerned with the hydroelastic problem of a very large pontoon-type floating structure(VLFS) edged with a pair of submerged horizontal plates, which is a combination of perforated and non-perforated pla...This paper is concerned with the hydroelastic problem of a very large pontoon-type floating structure(VLFS) edged with a pair of submerged horizontal plates, which is a combination of perforated and non-perforated plates attached to the for-end and back-end of the VLFS. For the hydroelastic analysis, the fluid is assumed to be ideal and its motion is irrotational so that a velocity potential exists. The VLFS is modeled as an elastic plate according to the classical thin plate theory. The fluid-structure interaction problem is separated into conventional hydrodynamics and structure dynamics by using modal expansion method in the frequency-domain. It involves, firstly, the deflection of the VLFS, which is expressed by a superposition of modal functions and corresponding modal amplitudes. Then the boundary element method is used to solve the integral equations of diffraction and radiation on the body surface for the velocity potential, whereas the vibration equation is solved by the Galerkin's method for modal amplitudes, and then the deflection is obtained by the sum of multiplying modal functions with modal amplitudes. This study examines the effects of the width and location of the non-perforated horizontal plates on the hydroelastic response of the VLFS, then the performance of perforated plates is investigated to reduce the motion near the fore-end of the VLFS. Considering the advantages and disadvantages of submerged plates without and with cylindrical holes, we propose a simple anti-motion device, which is a combination of a pair of perforated and non-perforated plates attached to the for-end and back-end of the VLFS. The effectiveness of this device in reducing the deformation and bending moment of the VLFS has been confirmed, and is compared with the results in cases without and with the submerged horizontal plates by the analysis in this paper.展开更多
Political communication is an interactive process by which politicians transmit information and political discourse to voters and receive feedback through media. This communication process is a two way process of comm...Political communication is an interactive process by which politicians transmit information and political discourse to voters and receive feedback through media. This communication process is a two way process of communication between politicians and voters by which, on the one hand, politicians transmit their thoughts and wills to voters, and on the other hand voters communicate their opinions to politicians, after interpreting, in different ways, the messages that they received. The key objective of political communication is to persuade or influence and cause voters, who are the target audience, to vote for a particular party by convincing them. In order to ensure the smooth operation of political communication processes it is essential that the parliament, government, political parties, non-governmental organizations, environmentalist groups and pressure groups also actually take part in this process The decisive and transformative power of mass media and advertising phenomenon on the political systems has grown to become more and more influential in the recent years. The use of information considerably increases in line with the increase in the use of propaganda. No doubL this information age has turned the world into ＂a universal village＂. On the one hand, the concentration in media and on the other hand rapid developments in Internet technologies expose societies to the bombardment of messages. Being exposed to or bombarded by numerous varieties of messages in their daily lives lead to the creation of variabilities and instabilities in individual＇s behaviors. Accordingly, political organizations while trying to convey messages to masses through political communication and advertising have to deliver systematic, comprehensible and influential messages by taking the advantage of visualization as much as possible.展开更多
With the growing deployment of smart distribution grid,it has become urgent to investigate the smart distribution grid behavior during transient faults and improve the system stability.The feasibility of segmenting la...With the growing deployment of smart distribution grid,it has become urgent to investigate the smart distribution grid behavior during transient faults and improve the system stability.The feasibility of segmenting large power grids and multiple smart distribution grids interconnections using energy storage technology for improving the system dynamic stability was studied.The segmentation validity of the large power grids and smart distribution grid inverter output interconnections power system using energy storage technology was proved in terms of theoretical analysis.Then,the influences of the energy storage device location and capacity on the proposed method were discussed in detail.The conclusion is obtained that the ESD optimal locations are allocated at the tie line terminal buses in the interconnected grid,respectively.The effectiveness of the proposed method was verified by simulations in an actual power system.展开更多
A heavy-haul train-track coupled model is developed. Taking the emergency braking of the 2×104 t combined train as example, the train longitudinal impulse, the coupler dynamic behaviors and wheel-rail interaction...A heavy-haul train-track coupled model is developed. Taking the emergency braking of the 2×104 t combined train as example, the train longitudinal impulse, the coupler dynamic behaviors and wheel-rail interactions of vehicles distributing in the different positions are analyzed. The results indicate that under the coupler compressing forces, the couplers of middle locomotives may tilt to the free swing limits, which induces the unidirectional tilt of their connected wagon couplers. Consequently, the coupler longitudinal forces produce the lateral components, and then affect the wheel-rail dynamic interaction. The performance of the middle locomotive and their neighboring freight wagons deteriorate significantly, becoming the most dangerous parts in the combined train. The wagons disconnecting with the locomotives can basically keep their couplers to stabilize in the centering positions, even though the maximum coupler longitudinal force acts on it. And its corresponding running safety also has little changes.展开更多
基金The National Natural Science Foundation of China(No.51377021)the Science and Technology Project of State Grid Corporation of China(No.SGTJDK00DWJS1600014)
文摘To integrate different renewable energy resources effectively in a microgrid, a configuration optimization model of a multi-energy distributed generation（DG） system and its auxiliary equipment is proposed. The model mainly consists of two parts, the determination of initial configuration schemes according to user preference and the selection of the optimal scheme. The comprehensive evaluation index（CEI）, which is acquired through the analytic hierarchy process（AHP） weight calculation method, is adopted as the evaluation criterion to rank the initial schemes. The optimal scheme is obtained according to the ranking results. The proposed model takes the diversity of different equipment parameters and investment cost into consideration and can give relatively suitable and economical suggestions for system configuration.Additionally, unlike Homer Pro, the proposed model considers the complementation of different renewable energy resources, and thus the rationality of the multi-energy DG system is improved compared with the single evaluation criterion method which only considers the total cost.
文摘With the evolution of network technologies, the deficiencies of TCP protocol are becoming more and more distinct. The new TCP implementation, called Receiver Advertisement Based TCP (TCP-Rab) proposed here to eliminate these deficiencies, adopts two basic mechanisms: (1) Bandwidth Estimation and (2) Immediate Recovery. Bandwidth estimation is carried out at the receiver, and the result is sent back to the sender via the acknowledgments. Immediate Recovery guarantees high performance even in lossy link. Rab can distinguish the reason for packet loss, and thus adopt appropriate recovery strategy. For loss by network congestion, it will back off its congestion window, and for loss by link errors, it will recover the congestion window immediately. Simulations indicated that Rab has superiority over other TCP implementations.
文摘The effect of hydroxamic acid starch (HAS) and hydroxamic acid polyacrylamide (HPAM) on the flotation of diaspore and kaolinite was investigated by flotation test. It is found that HAS depresses diaspore but activates kaolinite in acidic pulp,while HPAM activates both diaspore and kaolinite in the pH range of 2.010.5. The measurement of zeta potential shows that both HAS and HPAM can increase zeta potential of negatively charged diaspore, which indicates the existence of chemical bonding or hydrogen bonding between the reagents and diaspore. By covering the collector dodecyl amine(DDA) on diaspore surface,HAS increases the hydrophilicity of minerals and depresses the flotation of diaspore,however HPAM activates the flotation of diaspore by increasing the adsorption of DDA on diaspore surface.
基金supported by the National Natural Science Foundation of China (51209184,51279186,51479175)
文摘A Constrained Interpolation Profile （CIP）-based model is developed to predict the mooring force of a two-dimensional floating oil storage tank under wave conditions, which is validated against to a newly performed experiment. In the experiment, a box-shaped floating oil storage apparatus is used. Computations are performed by an improved CIP-based Cartesian grid model, in which the THINC/SW scheme （THINC： tangent of hyperbola for interface capturing; SW： Slope Weighting）, is used for interface capturing. A multiphase flow solver is adopted to treat the water-air-body interactions. The Immersed Boundary Method （IBM） is implemented to treat the body surface. Main attention is paid to the sum force of mooring line and velocity field around the body. It is found that the sum force of the mooring line increases with increasing wave amplitude. The body suffers from water wave impact and large body motions occur near the free surface. The vortex occurs near the sharp edge, i.e., the sharp bottom comers of the float- ing oil storage tank and the vortex shedding can be captured by the present numerical model. The present model could be further improved by including turbulence model which is currently under development. Comparison between the computational mooring forces and the measured mooring forces is presented with a reasonable agreement. The developed numerical model can predict the mooring line forces very well.
基金Supported by the Fund for Independent Innovation of Agricultural Sciences in Jiangsu Province(CX-12-5035)
文摘This study was to evaluate the high yielding and stability of candidate cultivars, depict the adaptive planting region, analyze trial location discrim-ination ability and representativeness, as wel as identify the ideal cultivar and trial location, with the aim to provide theory background for cultivar selection and rea-sonable scheme of test location in Jiangsu Province. [Method] The GGE biplot method was used to analyze the lint cotton yield of 12 experimental genotypes in the 6 test locations （three replicates in each） of the cotton regional trial in Jiangsu Province in 2013. [Result] The effects of genotype （G）, environment （E）, and geno-type by environment interaction （G＆#215;E） on lint cotton yield were al highly significant （P〈0.01）, which made it necessary to further explore the specific pattern of geno-type by environment interaction. Jinmian118 （G4） and SF3303 （G5） were the best ideal genotypes screened by the ＂ideal cultivar＂ and ＂ideal location＂ view of GGE biplot, and the ordination of test sites based on the ideal index were in the order of Dafeng （DF）, Yanliang （YL）, Liuhe （LH）, Dongtai （DT）, Yancheng （YC）, and Nantong （NT）, among which NT was relatively weak in representing of the whole target cot-ton planting region in Jiangsu Province. The ＂similarity among locations＂ view of GGE biplot clustered al trial locations into one group, showing that the test sites in the cotton planting region in Jiangsu Province were in the same mega-environment. The ＂which-won-where＂ view of GGE biplot indicated that cotton cultivar Jinmian118 （G4） was the most appropriate cultivar in the homogeneous cotton planting region in Jiangsu Province. [Conclusion] Among the candidate cultivars, Jinmian118 and SF3303 were identified as the most ideal cultivars in this set of conventional cotton regional trial in Jiangsu Province; the test site of Dafeng ranked the first out of al locations in terms of discrimination and representativeness, and al test locations were clustered into the same mega-environmet, which indicated the high efficiency of cultivar selection in the cotton regional trial in Jiangsu Province.
基金Supported by the National Natural Science Foundation of China(21006127)the National Basic Research Program of China(2012CB720500)
文摘This paper presents some new dynamic interaction analysis approaches for square or non-square systems and a pairing evaluation method. For square stable systems, an open-loop approach is proposed, which features the tradeoff between the contributions of response time constant and delay time to relative gain. For non-square stable systems, an extension from the proposed open-loop approach for square systems is presented and the corresponding pairing procedure is given. No interaction analysis approach is perfect for all systems, so any recommended pairing needs to be examined. An evaluation method is proposed in closed-loop with optimal controllers for each loop and whether the pairing is appropriate can be evaluated through testing if the equivalent relative gain is within defined scope. The advantages and effectiveness of proposed interaction analysis approaches and pairing evaluation method are highlighted via several examples of industrial processes.
基金the National Science Foundation for Creative Re-search Groups of China (Grant No.50921001) for supporting this work
文摘This paper is concerned with the hydroelastic problem of a very large pontoon-type floating structure(VLFS) edged with a pair of submerged horizontal plates, which is a combination of perforated and non-perforated plates attached to the for-end and back-end of the VLFS. For the hydroelastic analysis, the fluid is assumed to be ideal and its motion is irrotational so that a velocity potential exists. The VLFS is modeled as an elastic plate according to the classical thin plate theory. The fluid-structure interaction problem is separated into conventional hydrodynamics and structure dynamics by using modal expansion method in the frequency-domain. It involves, firstly, the deflection of the VLFS, which is expressed by a superposition of modal functions and corresponding modal amplitudes. Then the boundary element method is used to solve the integral equations of diffraction and radiation on the body surface for the velocity potential, whereas the vibration equation is solved by the Galerkin's method for modal amplitudes, and then the deflection is obtained by the sum of multiplying modal functions with modal amplitudes. This study examines the effects of the width and location of the non-perforated horizontal plates on the hydroelastic response of the VLFS, then the performance of perforated plates is investigated to reduce the motion near the fore-end of the VLFS. Considering the advantages and disadvantages of submerged plates without and with cylindrical holes, we propose a simple anti-motion device, which is a combination of a pair of perforated and non-perforated plates attached to the for-end and back-end of the VLFS. The effectiveness of this device in reducing the deformation and bending moment of the VLFS has been confirmed, and is compared with the results in cases without and with the submerged horizontal plates by the analysis in this paper.
文摘Political communication is an interactive process by which politicians transmit information and political discourse to voters and receive feedback through media. This communication process is a two way process of communication between politicians and voters by which, on the one hand, politicians transmit their thoughts and wills to voters, and on the other hand voters communicate their opinions to politicians, after interpreting, in different ways, the messages that they received. The key objective of political communication is to persuade or influence and cause voters, who are the target audience, to vote for a particular party by convincing them. In order to ensure the smooth operation of political communication processes it is essential that the parliament, government, political parties, non-governmental organizations, environmentalist groups and pressure groups also actually take part in this process The decisive and transformative power of mass media and advertising phenomenon on the political systems has grown to become more and more influential in the recent years. The use of information considerably increases in line with the increase in the use of propaganda. No doubL this information age has turned the world into ＂a universal village＂. On the one hand, the concentration in media and on the other hand rapid developments in Internet technologies expose societies to the bombardment of messages. Being exposed to or bombarded by numerous varieties of messages in their daily lives lead to the creation of variabilities and instabilities in individual＇s behaviors. Accordingly, political organizations while trying to convey messages to masses through political communication and advertising have to deliver systematic, comprehensible and influential messages by taking the advantage of visualization as much as possible.
基金Project(N110404031)supported by the Fundamental Research Funds for the Central Universities,China
文摘With the growing deployment of smart distribution grid,it has become urgent to investigate the smart distribution grid behavior during transient faults and improve the system stability.The feasibility of segmenting large power grids and multiple smart distribution grids interconnections using energy storage technology for improving the system dynamic stability was studied.The segmentation validity of the large power grids and smart distribution grid inverter output interconnections power system using energy storage technology was proved in terms of theoretical analysis.Then,the influences of the energy storage device location and capacity on the proposed method were discussed in detail.The conclusion is obtained that the ESD optimal locations are allocated at the tie line terminal buses in the interconnected grid,respectively.The effectiveness of the proposed method was verified by simulations in an actual power system.
基金Projects(51605315,51478399)supported by the National Natural Science Foundation of ChinaProject(2013BAG20B00)supported by the National Key Technology R&D Program of ChinaProject(TPL1707)supported by the Open Project Program of the State Key Laboratory of Traction Power,China
文摘A heavy-haul train-track coupled model is developed. Taking the emergency braking of the 2×104 t combined train as example, the train longitudinal impulse, the coupler dynamic behaviors and wheel-rail interactions of vehicles distributing in the different positions are analyzed. The results indicate that under the coupler compressing forces, the couplers of middle locomotives may tilt to the free swing limits, which induces the unidirectional tilt of their connected wagon couplers. Consequently, the coupler longitudinal forces produce the lateral components, and then affect the wheel-rail dynamic interaction. The performance of the middle locomotive and their neighboring freight wagons deteriorate significantly, becoming the most dangerous parts in the combined train. The wagons disconnecting with the locomotives can basically keep their couplers to stabilize in the centering positions, even though the maximum coupler longitudinal force acts on it. And its corresponding running safety also has little changes.
