对模数转换器中的传统开关电路的导通电阻进行了详细的理论分析,提出了一种互补型栅压自举开关电路。该电路结构相比于传统开关,通过少量的功耗代价换取了更优的频域性能,在不同工艺角下具有更好的鲁棒性,适用于先进工艺下的低电压工作...对模数转换器中的传统开关电路的导通电阻进行了详细的理论分析,提出了一种互补型栅压自举开关电路。该电路结构相比于传统开关,通过少量的功耗代价换取了更优的频域性能,在不同工艺角下具有更好的鲁棒性,适用于先进工艺下的低电压工作环境。互补型栅压自举开关电路采用28 nm工艺设计,在1 V的电源电压下,对800 f F的负载电容进行速率为800 MS/s的采样,在低频输入下(181.25 MHz)实现的无杂散动态范围(SFDR)为89 d B,四倍奈奎斯特输入频率下(1 556 MHz)实现的SFDR为65 d B,开关电路面积为80μm×20μm。展开更多
A 2GHz differentially tuned CMOS monolithic LC-VCO is designed and fabricated in a 0.18μm CMOS process. The VCO has a 16.15% tuning range （from 1. 8998 to 2. 2335GHz） through a combination of analog and digital tun...A 2GHz differentially tuned CMOS monolithic LC-VCO is designed and fabricated in a 0.18μm CMOS process. The VCO has a 16.15% tuning range （from 1. 8998 to 2. 2335GHz） through a combination of analog and digital tuning techniques （4-bit binary switch-capacitor array）. The measured phase noise is - 118.17dBc/Hz at a 1MHz offset from a 2. 158GHz carrier. With the presented improved switch,the phase noise varies no more than 3dB at different digital control bits. The phase noise changes only by about 2dB in the tuning range because of the pn-junctions as the varactors. The VCO draws a current of about 2. lmA from a 1.8V power supply and works normally with a 1.5V power supply.展开更多
文摘对模数转换器中的传统开关电路的导通电阻进行了详细的理论分析,提出了一种互补型栅压自举开关电路。该电路结构相比于传统开关,通过少量的功耗代价换取了更优的频域性能,在不同工艺角下具有更好的鲁棒性,适用于先进工艺下的低电压工作环境。互补型栅压自举开关电路采用28 nm工艺设计,在1 V的电源电压下,对800 f F的负载电容进行速率为800 MS/s的采样,在低频输入下(181.25 MHz)实现的无杂散动态范围(SFDR)为89 d B,四倍奈奎斯特输入频率下(1 556 MHz)实现的SFDR为65 d B,开关电路面积为80μm×20μm。
文摘A 2GHz differentially tuned CMOS monolithic LC-VCO is designed and fabricated in a 0.18μm CMOS process. The VCO has a 16.15% tuning range （from 1. 8998 to 2. 2335GHz） through a combination of analog and digital tuning techniques （4-bit binary switch-capacitor array）. The measured phase noise is - 118.17dBc/Hz at a 1MHz offset from a 2. 158GHz carrier. With the presented improved switch,the phase noise varies no more than 3dB at different digital control bits. The phase noise changes only by about 2dB in the tuning range because of the pn-junctions as the varactors. The VCO draws a current of about 2. lmA from a 1.8V power supply and works normally with a 1.5V power supply.
