In order to study the evacuation behavior of miners during accidents,we analyzed the rational layout of a safe chamber,and improved evacuation efficiency.A visual model of evacuation was developed and used to simulate...In order to study the evacuation behavior of miners during accidents,we analyzed the rational layout of a safe chamber,and improved evacuation efficiency.A visual model of evacuation was developed and used to simulate the evacuation process of mines,given their special underground environments.In our simulation,the working faces of a coal mine and nearby tunnels were divided into 0.5 m×0.5 m grids to reflect the location of occupants and obstacles.Based on a "flow potential of the occupant",we determined the direction of movement and routes of occupants.In the model,evacuation speed changed as a function of crowd density,with an average speed of 1.30 m/s.The model also takes into account detection time of the disaster and the personnel response time.Evacuation time,exit flow rate and evacuation path were obtained by simulation.The results indicate that using simulation technology can present a more visual evacuation process and show the behavior of occupants.Our establishment of a mine safety evacuation system has merit as reference value.展开更多
In this paper,the advantage of using numerical models with the strength reduction method(SRM) to evaluate entry stability in complex multiple-seam conditions is demonstrated.A coal mine under variable topography from ...In this paper,the advantage of using numerical models with the strength reduction method(SRM) to evaluate entry stability in complex multiple-seam conditions is demonstrated.A coal mine under variable topography from the Central Appalachian region is used as a case study.At this mine,unexpected roof conditions were encountered during development below previously mined panels.Stress mapping and observation of ground conditions were used to quantify the success of entry support systems in three room-and-pillar panels.Numerical model analyses were initially conducted to estimate the stresses induced by the multiple-seam mining at the locations of the affected entries.The SRM was used to quantify the stability factor of the supported roof of the entries at selected locations.The SRM-calculated stability factors were compared with observations made during the site visits,and the results demonstrate that the SRM adequately identifies the unexpected roof conditions in this complex case.It is concluded that the SRM can be used to effectively evaluate the likely success of roof supports and the stability condition of entries in coal mines.展开更多
MFIRE, an underground mine fire simulation program developed in 1980＇s, is a tool that can be used to simulate the impacts of a mine fire event to a mine ventilation network. However, the lack of the abilities to sim...MFIRE, an underground mine fire simulation program developed in 1980＇s, is a tool that can be used to simulate the impacts of a mine fire event to a mine ventilation network. However, the lack of the abilities to simulate some of the important mine fire phenomena realistically hindered its wide applications. This research carried out to improve and upgrade the MFIRE 2.20 program to MFIRE 2.30. The new additions of MFIRE 2.30 including a time dependent fire model, smoke rollback prediction, the incorporation of a moving fire source, and a rewriting of MFIRE in Microsoft Visual C＋＋ were interpreted.展开更多
In conventional seismic exploration,complex overburden prevents us from imaging the deeper underground structure,because near-surface velocity model cannot be efficiently simplified and accurately established. The vir...In conventional seismic exploration,complex overburden prevents us from imaging the deeper underground structure,because near-surface velocity model cannot be efficiently simplified and accurately established. The virtual source method provides a promising solution,which images below a complex overburden without the knowledge of overburden velocities and near-surface changes. In this paper,the authors simulate the forward modeling under complex overburden with sources on the surface and receivers in the horizontal well,and reset the real sources into the horizontal well using the virtual source method,which subtly avoid the distortion effects of the complex overburden. Finally the underground structure can be imaged using Kirchhoff migration,so the feasibility and advantages of the virtual source method are verified.展开更多
文摘In order to study the evacuation behavior of miners during accidents,we analyzed the rational layout of a safe chamber,and improved evacuation efficiency.A visual model of evacuation was developed and used to simulate the evacuation process of mines,given their special underground environments.In our simulation,the working faces of a coal mine and nearby tunnels were divided into 0.5 m×0.5 m grids to reflect the location of occupants and obstacles.Based on a "flow potential of the occupant",we determined the direction of movement and routes of occupants.In the model,evacuation speed changed as a function of crowd density,with an average speed of 1.30 m/s.The model also takes into account detection time of the disaster and the personnel response time.Evacuation time,exit flow rate and evacuation path were obtained by simulation.The results indicate that using simulation technology can present a more visual evacuation process and show the behavior of occupants.Our establishment of a mine safety evacuation system has merit as reference value.
文摘In this paper,the advantage of using numerical models with the strength reduction method(SRM) to evaluate entry stability in complex multiple-seam conditions is demonstrated.A coal mine under variable topography from the Central Appalachian region is used as a case study.At this mine,unexpected roof conditions were encountered during development below previously mined panels.Stress mapping and observation of ground conditions were used to quantify the success of entry support systems in three room-and-pillar panels.Numerical model analyses were initially conducted to estimate the stresses induced by the multiple-seam mining at the locations of the affected entries.The SRM was used to quantify the stability factor of the supported roof of the entries at selected locations.The SRM-calculated stability factors were compared with observations made during the site visits,and the results demonstrate that the SRM adequately identifies the unexpected roof conditions in this complex case.It is concluded that the SRM can be used to effectively evaluate the likely success of roof supports and the stability condition of entries in coal mines.
文摘MFIRE, an underground mine fire simulation program developed in 1980＇s, is a tool that can be used to simulate the impacts of a mine fire event to a mine ventilation network. However, the lack of the abilities to simulate some of the important mine fire phenomena realistically hindered its wide applications. This research carried out to improve and upgrade the MFIRE 2.20 program to MFIRE 2.30. The new additions of MFIRE 2.30 including a time dependent fire model, smoke rollback prediction, the incorporation of a moving fire source, and a rewriting of MFIRE in Microsoft Visual C＋＋ were interpreted.
文摘In conventional seismic exploration,complex overburden prevents us from imaging the deeper underground structure,because near-surface velocity model cannot be efficiently simplified and accurately established. The virtual source method provides a promising solution,which images below a complex overburden without the knowledge of overburden velocities and near-surface changes. In this paper,the authors simulate the forward modeling under complex overburden with sources on the surface and receivers in the horizontal well,and reset the real sources into the horizontal well using the virtual source method,which subtly avoid the distortion effects of the complex overburden. Finally the underground structure can be imaged using Kirchhoff migration,so the feasibility and advantages of the virtual source method are verified.
