A hybrid ventilation scheme applied to bidirectional excavation tunnel construction with a long inclined shaft

The breakage and bending of ducts result in a difficulty to cope with ventilation issues in bidirectional excavation tunnels with a long inclined shaft using a single ventilation method based on ducts.To discuss the hybrid ventilation system applied in bidirectional excavation tunnels with a long inclined shaft,this study has established a full-scale computational fluid dynamics model based on field tests,the Poly-Hexcore method,and the sliding mesh technique.The distribution of wind speed,temperature field,and CO in the tunnel are taken as indices to compare the ventilation efficiency of three ventilation systems(duct,duct-ventilation shaft,duct–ventilated shaft-axial fan).The results show that the hybrid ventilation scheme based on duct-ventilation shaft–axial fan performs the best among the three ventilation systems.Compared to the duct,the wind speed and cooling rate in the tunnel are enhanced by 7.5%–30.6%and 14.1%–17.7%,respectively,for the duct-vent shaft-axial fan condition,and the volume fractions of CO are reduced by 26.9%–73.9%.This contributes to the effective design of combined ventilation for bidirectional excavation tunnels with an inclined shaft,ultimately improving the air quality within the tunnel.

Establishment and application of logging saturation interpretation equation in vuggy reservoirs

Vuggy reservoirs are the most common, albeit important heterogeneous carbonate reservoirs in China. However, saturation calculations using logging data are not well developed, whereas Archie method is more common. In this study, electrical conduction in a vuggy reservoir is theoretically analyzed to establish a new saturation equation for vuggy reservoirs. We found that vugs have a greater effect on saturation than resistivity, which causes inflection in the rock-electricity curve. Using single-variable exPeriments, we evaluated the effects of rug size, vug number, and vug distribution on the rock-electricity relation. Based on the general saturation model, a saturation equation for vuggy reservoirs is derived, and the physical significance of the equation parameters is discussed based on the seepage-electricity similarity. The equation parameters depend on the pore structure, and vugs and matrix pore size distribution. Furthermore, a method for calculating the equation parameters is proposed, which uses nuclear magnetic resonance （NMR） data to calculate the capillary pressure curve. Field application of the proposed equation and parameter derivation method shows good match between calculated and experimental results, with an average absolute error of 5.8%.

Analysis of Mine Ventilation Network Using Genetic Algorithm

Aim To determine the global optimal solution for a mine ventilation network under given network topology and airway characteristics. Methods\ The genetic algorithm was used to find the global optimal solution of the network. Results\ A modified genetic algorithm is presented with its characteristics and principle. Instead of working on the conventional bit by bit operation, both the crossover and mutation operators are handled in real values by the proposed algorithms. To prevent the system from turning into a premature problem, the elitists from two groups of possible solutions are selected to reproduce the new populations. Conclusion\ The simulation results show that the method outperforms the conventional nonlinear programming approach whether from the viewpoint of the number of iterations required to find the optimum solutions or from the final solutions obtained.

Smoke distribution in naturally ventilated urban transportation tunnels with multiple shafts

The smoke spreading law of urban transportation tunnels with multiple shafts under natural ventilation is studied.A full-scale burning experiment is conducted in an actual tunnel.The study shows that smoke temperatures below the tunnel ceiling reduce rapidly along the longitudinal towards the tunnel exits. A noticeable temperature stratification is observed near the fire source.Most fire smoke is exhausted out of the shafts while the number of the smoke shafts in the downstream is more than that in the upstream.Large eddy simulation LES based on computational fluid dynamics CFD is carried out using the fire dynamics simulator FDS software with parallel processing in which the grid size of the fire-domain is set to be 0.083 m.The simulation results of temperatures under the ceiling the smoke fronts and the shafts＇smoke exhaust or air supply agree reasonably with the experimental data. Further simulations indicate that the decreasing ambient temperature or shaft spacing might reduce smoke temperatures under the tunnel ceiling and increase mass flow rates out of the shafts.This study provides technical scientific evidence and supports for the design and construction of such kinds of tunnels.

惠民工程通民心

＂井井通电＂工程是国家电网公司农网改造升级两年攻坚战的重要内容,是一项惠及老百姓的民心工程、德政工程,在农业抗旱浇灌、保障粮食稳产增产、助力农民减负增收、促进农业转型升级过程中发挥了积极作用。2017年6月20日,国网山东高密市供电公司2016—2017年投资建设的＂井井通电＂工程全部竣工,历时一年多的时间,完成8 604眼农田机井通电任务,实现了服务区内机井通电全覆盖。

Development of underground mine monitoring and communication system integrated ZigBee and GIS

An automated underground mine monitoring and communication system based on the integration of new technologies is introduced to promote safety and health,operational management and cost-effectiveness.The proposed system integration considering Wireless Sensor Network(WSN) assisted Geographic Information System(GIS) enables to monitor and control underground mining applications from surface office.Based on the capabilities of WSNs,ZigBee network is adapted for near real-time monitoring,ventilation system control and emergency communication in underground mine.ZigBee nodes were developed to sense environmental attributes such as temperature,humidity and gases concentration;switching ON and OFF ventilation fans;and texting emergency messages.A trigger action plan for monitored attributes above normal and threshold value limits is programmed in the surface GIS management server.It is designed to turn the auxiliary fans on remotely or automatically in orange condition and sending evacuation messages for underground miners in unsafe(red) condition.Multi-users operation and 3D visualisations are other successful achievements of the proposed system for the underground monitoring and communication.

Study on optimization control method based on artificial neural network

In the goal optimization and control optimization process the problems with common artificial neural network algorithm are unsure convergence, insufficient post-training network precision, and slow training speed, in which partial minimum value question tends to occur. This paper conducted an in-depth study on the causes of the limi-tations of the algorithm, presented a rapid artificial neural network algorithm, which is characterized by integrating multiple algorithms and by using their complementary advan-tages. The salient feature of the method is self-organization, which can effectively prevent the optimized results from tending to be partial minimum values. Overall optimization can be achieved with this method, goal function can be searched for in overall scope. With op-timization control of coal mine ventilator as a practical application, the paper proves that by integrating multiple artificial neural network algorithms, best control optimization and goal optimized can be achieved.

Stability of mine ventilation system based on multiple regression analysis

In order to overcome the disadvantages of diagonal connection structures that are complex and for which it is difficult to derive the discriminant of the airflow directions of airways, we have applied a multiple regression method to analyze the effect, of changing the rules of mine airflows, on the stability of a mine ventilation system. The amount of air （ Qj ） is determined for the major airway and an optimum regression equation was derived for Qi as a function of the independent variable （ Ri ）, i.e., the venti- lation resistance between different airways. Therefore, corresponding countermeasures are proposed according to the changes in airflows. The calculated results agree very well with our practical situation, indicating that multiple regression analysis is simple, quick and practical and is therefore an effective method to analyze the stability of mine ventilation systems.

Performance evaluation methods and instrumentation for mine ventilation fans

Ventilation fans are one of the most important pieces of equipment in coal mines. Their performance plays an important role in the safety of staff and production. Given the actual requirements of coal mine production,we instituted a research project on the measurement methods of key performance parameters such as wind pressure,amount of ventilation and power. At the end a virtual instrument for mine ventilation fans performance evaluation was developed using a USB interface. The practical performance and analytical results of our experiments show that it is feasible,reliable and effective to use the proposed instrumentation for mine ventilation performance evaluation.

An optimized control of ventilation in coal mines based on artificial neural network

According to the nonlinear and time dependent features of the ventilation systems for coal mines, a neural network method is applied to control the ventilator for coal mines in real time. The technical processes of coal mine ventilation system are introduced, and the principle of controlling a ventilation fan is also explained in detail. The artificial neutral network method is used to calculate the wind quantity needed by work spots in coal mine on the basis of the data collected by the system, including ventilation conditions, environmental temperatures, humidity, coal dust and the contents of all kinds of poisonous and harmful gases. Then the speed of ventilation fan is controlled according to the required wind which is determined by an overall integration of data. A neural network method is presented for overall optimized solution or the genetic algorithm of simulated annealing.

Sensitivity analysis on parameter changes in underground mine ventilation systems

A more efficient mine ventilation system, the ventilation-on-demand （VOD） system, has been proposed and tested in Canadian mines recently. In order to supply the required air volumes to the production areas of a mine, operators need to know the cause and effect of any changes requested from the VOD system. The sensitivity analysis is developed through generating a cause and effect matrix of sensitivity factors on given parameter changes in a ventilation system. This new utility, which was incorporated in the 3D-CANVENT mine ventilation simulator, is able to predict the airflow distributions in a ventilation network when underground conditions and ventilation controls are changed. For a primary ventilation system, the software can determine the optimal operating speed of the main fans to satisfy the airflow requirements in underground workings without necessarily using booster fans and regulators locally. An optimized fan operating speed time-table would assure variable demand-based fresh air delivery to the production areas effectively, while generating significant savings in energy consumption and operating cost.

The practice of mine ventilation engineering

The practice of ventilation is continually evolving with new technological advances developed in the mining industry.In recent years the advances in diesel engine technologies,ventilation modeling software,and ventilation management capacities have redefined the historical methods used to evaluate systems.The advances re-evaluate previous methods used to calculate the airflow requirements for the dilution of diesel exhaust fumes.Modeling software has become an integral part of planning and developing ventilation systems in partnership with graphical mine design software packages to generate realistic representations of the mine.Significant advances in ventilation control strategies through remote sensors and monitoring capabilities have been developed to results in cost savings.Though there has been much advancement in mine ventilation technology,the practices and basic ventilation principals enacted through the ventilation engineer cannot be placated with technological advances only.

A new matrix-based mathematical model for determining unidirectional circuits in a ventilation network

The occurrence of local circulating ventilation can be caused by many factors, such as the airflow reversion during mine fire,the improper arrangement of local fan or underground fan station and the man-made error input of raw data before network solving. Once circulating ventilations occur,the corresponding branches in the ventilation network corresponding to the relevant airways in ventilation system form circuits,and all the direc- tions of the branches in the circuits are identical,which is the unidirectional problem in ventilation network.Based on the properties of node adjacent matrix,a serial of mathe- matical computation to node adjacent matrix were performed,and a mathematical model for determining unidirectional circuits based on node adjacent matrix was put forward.

Airflow adjustment and minimization of the air power of ventilation network

It is often required to know which roadway （adjustment roadway） resistances and how much values of the resis- tances should be changed to make the airflow rates in roadways （target roadways） to certain required values in the practice of mine ventilation. In this case, the airflow rates of the target roadways and the resistances of the roadways other than the ad- justment roadways are the given conditions and the resistances of the adjustment roadways are the solutions to be found. No straightforward method to solve the problem has been found up to now. Therefore, trial and error method using the ventilation network analysis program is utilized to solve the problem so far. The method takes long calculation time and the best answer is not necessarily obtained. The authors newly defined ＂airflow element＂ as an element of the ventilation network analysis. The resistances that satisfy the airflow requirements can be calculated straight forwardly by putting the function of the airflow element into the ventilation network analysis. The air power required for the ventilation can be minimized while meeting the airflow requirements by the advanced application of the method. The authors made the computer program fulfill the method. The program was applied to actual ventilation network and it was found that the method is very practical and the time required for the analysis is short.

Alternate solutions for mine ventilation network to keep a preassigned fixed quantity in a working place

In underground constructions, a good ventilation design not only delivers fresh air to establish good working environment, but also provides a scientific and reliable basis to prevent disasters. In emergency cases, unexpected closure of the main airways may occur, providing the workers with alternative airways is substantial. This is important not only to sustain personnel lives, but also to prevent the mine ventilation system from damage. In this research, alternate solutions were introduced in case of failure in the underground construction to keep a pre-assigned fixed quantity in a working place for mine ventilation network. Eight different collapse scenarios were proposed to study their effect on the air quantity distribution among the branches in the ventilation circuit. From these scenarios, it is found that providing a sufficient air quantity in the working places could be achieved through modification of the network topology and adjusting the values of the regulators pressure. It is also indicated that the distance between the collapse and working places has a great effect on the amount of air delivered to it. A reduction in the power consumption could be done by re-arrange the installed regulators and decreasing the number of nodes and branches inside the network. A relationship representing the effect of changing the network topology on the total network power consumption was deduced through regression analysis. It is found that the total network power is quadratic dependent on the number of regulators and number of branches while it is directly dependent on the regulator power.

Solid phase microextraction(SPME) sampling under turbulent conditions and for the simultaneous collecting of tracer gases

Solid phase microextraction （SPME） is a solvent-flee method of sample collection. SPME is an appealing method for sample collection because it is designed for the sampling of trace level analytes with short sampling times in a variety of environments. Additionally, SPME can be used to directly deliver a sample to a gas chromatograph （GC） for analysis by means of thermal desorption. In this paper, the performance of SPME under dynamic conditions was investigated. Additionally, the competence of SPME sampling for the simultaneous analysis of multiple trace analytes was also evaluated. This work is discussed in the context of underground mine ventilation surveys but is applicable to any industry in which ventilation circuits must be evaluated. The results of this paper showed that the performance of the 100 ~m PDMS SPME fiber was both precise and rapid under dynamic conditions. This SPME fiber was also able to simultaneously collect sulfur hexafluoride （SF6） and perfluoromethylcyclohexane （PMCH） with adequate sensitivity.

Optimization of air quantity regulation in mine ventilation networks using the improved differential evolution algorithm and critical path method

In mine ventilation networks, the reasonable airflow distribution is very important for the production safety and economy. Three basic problems of the natural, full-controlled and semi-controlled splitting were reviewed in the paper. Aiming at the high difficulty semi-controlled splitting problem, the general nonlinear multi-objectives optimization mathematical model with constraints was established based on the theory of mine ventilation networks. A new algorithm, which combined the improved differential evaluation and the critical path method （CPM） based on the multivariable separate solution strategy, was put forward to search for the global optimal solution more efficiently. In each step of evolution, the feasible solutions of air quantity distribution are firstly produced by the improved differential evolu- tion algorithm, and then the optimal solutions of regulator pressure drop are obtained by the CPM. Through finite steps iterations, the optimal solution can be given. In this new algorithm, the population of feasible solutions were sorted and grouped for enhancing the global search ability and the individuals in general group were randomly initialized for keeping diversity. Meanwhile, the individual neighbor- hood in the fine group which may be closely to the optimal solutions were searched locally and slightly for achieving a balance between global searching and local searching, thus improving the convergence rate. The computer program was developed based on this method. Finally, the two ventilation networks with single-fan and multi-fans were solved. The results show that this algorithm has advantages of high effectiveness, fast convergence, good robustness and flexibility. This computer program could be used to solve lar^e-scale ~eneralized ventilation networks o^timization problem in the future.

Sensitivity analysis of relevant parameters in complicated mine ventilation network by numerical test

Depending on the numerical test approach on a computer, the relationships among relevant parameters, eg branch number, node number, mesh number, computation accuracy, preliminary value of airflow rate, iteration number, computation time and convergence in a mine ventilation network analysis, were investigated based on 5 mine ventilation systems. The results show that a higher computation accuracy greatly influences the iteration number. When the accuracy reaches 10-6m3·s-1 for solving a complicated mine ventilation network, the running time is too long though a high-speed computer is used. The preliminary value of airflow rate in the range of 1100m3·s-1 has little effects the iteration number. The structure of network also has some effect on the iteration number.

Method of branch ariflow for calculatinga complicated mine ventilation networks

The solutions widely used at present for calculating complicated mine ventilation networks are ones in which resistance of the branches and characteristic parameters of the fans are taken as basic input data. But it is time and energy consuming to obtain the branch resistance values. A new solution is developed in this paper in which the branch resistance values are obtained through measuring and evaluating the airflow of the whole ventilation network. Theoretical analysis is made of the establishment of a linear equation series with branch resistance as unknown numbers, an equation series for which one, and only one, result of solutions exists. This solution is programmed in C language and passed on a personal computer. The programmed solution programmed proves of practical use, as demonstrated by specific examples. Being different from other solutions, the method takes the branch airflow and fan working points as basic input data, and the present solution is of greater advantage for calculating ventilation networks of mines in operation.

Improvement and upgrade of mine fire simulation program MFIRE

MFIRE, an underground mine fire simulation program developed in 1980＇s, is a tool that can be used to simulate the impacts of a mine fire event to a mine ventilation network. However, the lack of the abilities to simulate some of the important mine fire phenomena realistically hindered its wide applications. This research carried out to improve and upgrade the MFIRE 2.20 program to MFIRE 2.30. The new additions of MFIRE 2.30 including a time dependent fire model, smoke rollback prediction, the incorporation of a moving fire source, and a rewriting of MFIRE in Microsoft Visual C＋＋ were interpreted.