The silicon-containing poly (amic acid)s were synthesized from bis (3, 4-dicarboxyphenyl) dimethylsilane dianhydride (SIDA), pyromellitic dianhydride (PMDA) and 4,4′-oxydianiline (4,4'-ODA) in N, N-dimethylacetam...The silicon-containing poly (amic acid)s were synthesized from bis (3, 4-dicarboxyphenyl) dimethylsilane dianhydride (SIDA), pyromellitic dianhydride (PMDA) and 4,4′-oxydianiline (4,4'-ODA) in N, N-dimethylacetamide (DMAc). The poly (amic acid) films were obtained by solution-cast method from DMAc solutions and thermally converted into transparent, flexible and tough polyimide films. The wide-angle X-ray diffraction diagrams revealed that all the polyimides possessed amorphous character, and the regulation of those polyimides were decreased with the increase of the molar ratio of SIDA to PMDA. Differential scanning calorimeter measurements showed that the introduction of SIDA to polyimide backbone would make glass transition temperature shift to lower temperature. Thermogravimetric analyses indicated that the silicon-containing polyimides lowered decomposition temperature as compared with PMDA/4, 4′-ODA polyimides. However, UV-visible transmission and reflection spectra showed that the optical transparency of silicon-containing polyimide thin films was superior to that of PMDA/4, 4'-ODA polyimide thin films.展开更多
With the aim of developing a low-cost and efficient visible-light-driven photocatalyst for radical polymerization,iron-chelating polyimide networks(Fe@MPI)was fabricated by firstly synthesizing photoactive melamine-co...With the aim of developing a low-cost and efficient visible-light-driven photocatalyst for radical polymerization,iron-chelating polyimide networks(Fe@MPI)was fabricated by firstly synthesizing photoactive melamine-containing polyimide(MPI)networks and then incorporating Fe(III)cations into the polymer networks.Fe@MPI exhibits a wide absorption spectrum ranging from 220 to 1250 nm and 3.5 times higher photocurrent intensity as compared with the pristine MPI.Based on its excellent photo-electric properties,Fe@MPI was employed as a recyclable heterogeneous catalyst,providing sufficient activity for the visible-light driven radical polymerization to synthesize poly(methyl methacrylate)with molecular weight up to 31.×10^4 g mol.Taking advantage of the heterogeneous nature of the catalyst,Fe@MPI could be facilely regenerated from the polymerization solution by filtration without an obvious loss of its activity.This research provides a novel recyclable catalyst for visible-light driven radical polymerization.展开更多
In this paper a preliminary investigation of a novel optoelectronic polymer, poly (p-phenylene N-4-n-butylphenyl-N,N-bis- 4-vinylenephenylamine) (PNB), is reported. A single layer structure of ITO/PNB/Al was prepared ...In this paper a preliminary investigation of a novel optoelectronic polymer, poly (p-phenylene N-4-n-butylphenyl-N,N-bis- 4-vinylenephenylamine) (PNB), is reported. A single layer structure of ITO/PNB/Al was prepared via spin-coating of PNB solution as a thin film on the top of an ITO substrate, while aluminum top electrode was vacuum evaporated. Dark current- voltage characteristics of this device showed a typical rectifying behaviour. Photovoltaic response under a monochromatic illumination at 420 nm was observed, with an open circuit voltage of 0.3 V and fill factor of 0.21. Spectral response and optical absorption were found to be matched well. It was also discovered that the device showed a green electroluminescent emission at a forward bias. Turn-on voltage of the device was about 6 V and light output about 22.6 nW at a forward bias of 10 V. The work demonstrated that the PNB material might possess dual exciton sites resulting in a competition for excitons to be either separated or recombined. Both effects were associated with each other, which limited the photovoltaic or electroluminescence to some degrees.展开更多
Molecular imprinted polymer membranes (MIM) combine the merits of molecular imprint and membrane technology. In this work, a very thin of imprinted polymer that can specifically and selectively absorb the basic templa...Molecular imprinted polymer membranes (MIM) combine the merits of molecular imprint and membrane technology. In this work, a very thin of imprinted polymer that can specifically and selectively absorb the basic template (adenine) was grafted on the surface of polyvinylidene fluoride membrane by photo-grafting copolymerization. Because the molecular imprinted polymer is grafted on the surface of the matrix membrane without blocking the membrane pores, the resultant MIMs have high flux as microfiltration membrane (0.26 mol·m^-2·h^-1 of template and flux for distilled water was 3.6 ml·mim^-1·cm^-2 at 0.8 MPa). Moreover, the MIMs can absorb/desorb template molecules rapidly. Usually, it only takes several minutes for MIMs to absorb more than 75% of the template (adenine) in aqueous solution. And the influences of the type and amount of the functional monomers, the amount of the cross-linker on the absorption capability are discussed to determine the optimal preparation conditions。展开更多
The interface and surface properties of nano-hydroxyapatite(n-HA) and poly( 1, 4-phenylene sulfide)-poly (2,4-phenylene sulfide acid)(PPS-PPSA) copolymer composite were investigated. The results show that there are so...The interface and surface properties of nano-hydroxyapatite(n-HA) and poly( 1, 4-phenylene sulfide)-poly (2,4-phenylene sulfide acid)(PPS-PPSA) copolymer composite were investigated. The results show that there are some strong interface combinations of calcium ion (Ca2+ ), car-boxyl (-COO- ) and phosphate radicle ion (PO_4~3- ) between copolymer and n-HA in the composite. The presence of the 2,4-phenylene sulfide acid in copolymer can increase the affinity to n-HA, which causes the formation of chemical bindings between the PPS-PPSA copolymer and n-HA. XRD analysis and IR surface analysis indicate that n-HA is not encapsulated by copolymer but exposed on the surface of the composite, and has same structure and properties with the origi-nal n-HA. The presence of the interface chemical bindings between the PPS-PPSA copolymer and n-HA can increase the content of n-HA in composite but does not cause the decrease of the composite mechanical strength.展开更多
A novel thermo-sensitive superabsorbent hydrogel with salt- and pH-responsiveness properties was obtained by grafting of mixtures of acrylic acid （AA） and N-isopropylacrylamide （N1PAM） monomers onto kappa-carragee...A novel thermo-sensitive superabsorbent hydrogel with salt- and pH-responsiveness properties was obtained by grafting of mixtures of acrylic acid （AA） and N-isopropylacrylamide （N1PAM） monomers onto kappa-carrageenan, kC, using ammonium persulfate （APS） as a free radical initiator in the presence of methylene bisacrylamide （MBA） as a crosslinker. Infrared spectroscopy was carried out to confirm the chemical structure of the hydrogel. Moreover, morphology of the samples was examined by scanning electron microscopy （SEM）. The effect of MBA concentration and AA/NIPAM weight ratio on the water absorbency capacity has been investigated. The swelling variations of hydrogels were explained according to swelling theory based on the hydrogel chemical structure. The hydrogels exhibited salt-sensitivity and cation exchange properties. The temperature- and pH-reversibility properties of the hydrogels make the intelligent polymers as good candidates for considering as potential carriers for bioactive agents, e.g. drugs.展开更多
OBJECTIVE: To confirm the existence of point mutations in the SSU rDNA variable regions of 5 Leishmania donovani (L.d.) isolates from different epidemic foci in China. METHODS: Specific SSU rDNA fragments from nuclear...OBJECTIVE: To confirm the existence of point mutations in the SSU rDNA variable regions of 5 Leishmania donovani (L.d.) isolates from different epidemic foci in China. METHODS: Specific SSU rDNA fragments from nuclear DNA of 7 Leishmania species/isolates were amplified by PCR and then cloned into pGEM(R)-T Easy Vectors. After that, the specific fragments were sequenced by an automated DNA sequencer. RESULTS: Sequence analysis showed that the amplified DNA fragments of 7 Leishmania species/isolates were all 392 bp in length. All 5 point mutations were located in two unique sequence blocks (UQ-I and UQ-II), and no insertions or deletions were found. The identities of comparison of Leishmania in GeneBank were more than 98%. CONCLUSION: Five point mutations exist in the SSU rDNA variable region of 5 L.d. isolates from different epidemic foci of visceral leishmaniasis (VL) in China. Sequence differences of the SSU rDNA variable region exist among L.d. isolates from different foci.展开更多
文摘The silicon-containing poly (amic acid)s were synthesized from bis (3, 4-dicarboxyphenyl) dimethylsilane dianhydride (SIDA), pyromellitic dianhydride (PMDA) and 4,4′-oxydianiline (4,4'-ODA) in N, N-dimethylacetamide (DMAc). The poly (amic acid) films were obtained by solution-cast method from DMAc solutions and thermally converted into transparent, flexible and tough polyimide films. The wide-angle X-ray diffraction diagrams revealed that all the polyimides possessed amorphous character, and the regulation of those polyimides were decreased with the increase of the molar ratio of SIDA to PMDA. Differential scanning calorimeter measurements showed that the introduction of SIDA to polyimide backbone would make glass transition temperature shift to lower temperature. Thermogravimetric analyses indicated that the silicon-containing polyimides lowered decomposition temperature as compared with PMDA/4, 4′-ODA polyimides. However, UV-visible transmission and reflection spectra showed that the optical transparency of silicon-containing polyimide thin films was superior to that of PMDA/4, 4'-ODA polyimide thin films.
文摘With the aim of developing a low-cost and efficient visible-light-driven photocatalyst for radical polymerization,iron-chelating polyimide networks(Fe@MPI)was fabricated by firstly synthesizing photoactive melamine-containing polyimide(MPI)networks and then incorporating Fe(III)cations into the polymer networks.Fe@MPI exhibits a wide absorption spectrum ranging from 220 to 1250 nm and 3.5 times higher photocurrent intensity as compared with the pristine MPI.Based on its excellent photo-electric properties,Fe@MPI was employed as a recyclable heterogeneous catalyst,providing sufficient activity for the visible-light driven radical polymerization to synthesize poly(methyl methacrylate)with molecular weight up to 31.×10^4 g mol.Taking advantage of the heterogeneous nature of the catalyst,Fe@MPI could be facilely regenerated from the polymerization solution by filtration without an obvious loss of its activity.This research provides a novel recyclable catalyst for visible-light driven radical polymerization.
基金This work is supported by National Natural Science Foundationof China(20344002,10434030) State Key Program forBasic research of China (2003CB314707)
文摘In this paper a preliminary investigation of a novel optoelectronic polymer, poly (p-phenylene N-4-n-butylphenyl-N,N-bis- 4-vinylenephenylamine) (PNB), is reported. A single layer structure of ITO/PNB/Al was prepared via spin-coating of PNB solution as a thin film on the top of an ITO substrate, while aluminum top electrode was vacuum evaporated. Dark current- voltage characteristics of this device showed a typical rectifying behaviour. Photovoltaic response under a monochromatic illumination at 420 nm was observed, with an open circuit voltage of 0.3 V and fill factor of 0.21. Spectral response and optical absorption were found to be matched well. It was also discovered that the device showed a green electroluminescent emission at a forward bias. Turn-on voltage of the device was about 6 V and light output about 22.6 nW at a forward bias of 10 V. The work demonstrated that the PNB material might possess dual exciton sites resulting in a competition for excitons to be either separated or recombined. Both effects were associated with each other, which limited the photovoltaic or electroluminescence to some degrees.
文摘Molecular imprinted polymer membranes (MIM) combine the merits of molecular imprint and membrane technology. In this work, a very thin of imprinted polymer that can specifically and selectively absorb the basic template (adenine) was grafted on the surface of polyvinylidene fluoride membrane by photo-grafting copolymerization. Because the molecular imprinted polymer is grafted on the surface of the matrix membrane without blocking the membrane pores, the resultant MIMs have high flux as microfiltration membrane (0.26 mol·m^-2·h^-1 of template and flux for distilled water was 3.6 ml·mim^-1·cm^-2 at 0.8 MPa). Moreover, the MIMs can absorb/desorb template molecules rapidly. Usually, it only takes several minutes for MIMs to absorb more than 75% of the template (adenine) in aqueous solution. And the influences of the type and amount of the functional monomers, the amount of the cross-linker on the absorption capability are discussed to determine the optimal preparation conditions。
文摘The interface and surface properties of nano-hydroxyapatite(n-HA) and poly( 1, 4-phenylene sulfide)-poly (2,4-phenylene sulfide acid)(PPS-PPSA) copolymer composite were investigated. The results show that there are some strong interface combinations of calcium ion (Ca2+ ), car-boxyl (-COO- ) and phosphate radicle ion (PO_4~3- ) between copolymer and n-HA in the composite. The presence of the 2,4-phenylene sulfide acid in copolymer can increase the affinity to n-HA, which causes the formation of chemical bindings between the PPS-PPSA copolymer and n-HA. XRD analysis and IR surface analysis indicate that n-HA is not encapsulated by copolymer but exposed on the surface of the composite, and has same structure and properties with the origi-nal n-HA. The presence of the interface chemical bindings between the PPS-PPSA copolymer and n-HA can increase the content of n-HA in composite but does not cause the decrease of the composite mechanical strength.
文摘A novel thermo-sensitive superabsorbent hydrogel with salt- and pH-responsiveness properties was obtained by grafting of mixtures of acrylic acid （AA） and N-isopropylacrylamide （N1PAM） monomers onto kappa-carrageenan, kC, using ammonium persulfate （APS） as a free radical initiator in the presence of methylene bisacrylamide （MBA） as a crosslinker. Infrared spectroscopy was carried out to confirm the chemical structure of the hydrogel. Moreover, morphology of the samples was examined by scanning electron microscopy （SEM）. The effect of MBA concentration and AA/NIPAM weight ratio on the water absorbency capacity has been investigated. The swelling variations of hydrogels were explained according to swelling theory based on the hydrogel chemical structure. The hydrogels exhibited salt-sensitivity and cation exchange properties. The temperature- and pH-reversibility properties of the hydrogels make the intelligent polymers as good candidates for considering as potential carriers for bioactive agents, e.g. drugs.
文摘OBJECTIVE: To confirm the existence of point mutations in the SSU rDNA variable regions of 5 Leishmania donovani (L.d.) isolates from different epidemic foci in China. METHODS: Specific SSU rDNA fragments from nuclear DNA of 7 Leishmania species/isolates were amplified by PCR and then cloned into pGEM(R)-T Easy Vectors. After that, the specific fragments were sequenced by an automated DNA sequencer. RESULTS: Sequence analysis showed that the amplified DNA fragments of 7 Leishmania species/isolates were all 392 bp in length. All 5 point mutations were located in two unique sequence blocks (UQ-I and UQ-II), and no insertions or deletions were found. The identities of comparison of Leishmania in GeneBank were more than 98%. CONCLUSION: Five point mutations exist in the SSU rDNA variable region of 5 L.d. isolates from different epidemic foci of visceral leishmaniasis (VL) in China. Sequence differences of the SSU rDNA variable region exist among L.d. isolates from different foci.
