We present an improved angle polishing method in which the end of the cover slice near the glue layer is beveled into a thin,defect-free wedge,the straight edge of which is used as the datum for measuring the depth of...We present an improved angle polishing method in which the end of the cover slice near the glue layer is beveled into a thin,defect-free wedge,the straight edge of which is used as the datum for measuring the depth of subsurface damage. The bevel angle can be calculated from the interference fringes formed in the wedge. The minimum depth of the subsurface damage that can be measured by this method is a few hundred nanometers. Our results show that the method is straightforward, accurate, and convenient.展开更多
A molecular dynamics （MD） simulation is carried out to analyze the effect of cutting edge radius,cutdepth, and grinding speed on the depth of subsurface damage layers in monocrystal silicon grinding processes on an ...A molecular dynamics （MD） simulation is carried out to analyze the effect of cutting edge radius,cutdepth, and grinding speed on the depth of subsurface damage layers in monocrystal silicon grinding processes on an atomic scale. The results show that when the cutting edge radius decreases in the nanometric grinding process with the same cut-depth and grinding speed, the depth of the damage layers and the potential energy between the silicon atoms decrease too. Also, when the cut depth increases, both the depth of the damage layers and the potential energy between silicon atoms increase. When the grinding speed is between 20 and 200m/s,the depth of the damage layers does not change much with the increase of the grinding speed under the same cutting edge radius and cut depth conditions. This means that the MD simulation is not sensitive to changes in the grinding speed, and thus increasing the grinding speed properly can shorten the sion,the subsurface damage of monocrystal silicon is silicon atoms, which is verified by the ultra-precision simulation time and enlarge the simulation scale. In conclumainly based on the change of the potential energy between grinding and CMP experiments.展开更多
Subsurface defects were fluorescently tagged with nanoscale quantum dots and scanned layer by layer using confocal fluorescence microscopy to obtain images at various depths. Subsurface damage depths of fused silica o...Subsurface defects were fluorescently tagged with nanoscale quantum dots and scanned layer by layer using confocal fluorescence microscopy to obtain images at various depths. Subsurface damage depths of fused silica optics were characterized quantitatively by changes in the fluorescence intensity of feature points. The fluorescence intensity vs scan depth revealed that the maximum fluorescence intensity decreases sharply when the scan depth exceeds a critical value. The subsurface damage depth could be determined by the actual embedded depth of the quantum dots. Taper polishing and magnetorheological finishing were performed under the same conditions to verify the effectiveness of the nondestructive fluorescence method. The results indicated that the quantum dots effectively tagged subsurface defects of fused-silica optics, and that the nondestructive detection method could effectively evaluate subsurface damage depths.展开更多
文摘We present an improved angle polishing method in which the end of the cover slice near the glue layer is beveled into a thin,defect-free wedge,the straight edge of which is used as the datum for measuring the depth of subsurface damage. The bevel angle can be calculated from the interference fringes formed in the wedge. The minimum depth of the subsurface damage that can be measured by this method is a few hundred nanometers. Our results show that the method is straightforward, accurate, and convenient.
文摘A molecular dynamics （MD） simulation is carried out to analyze the effect of cutting edge radius,cutdepth, and grinding speed on the depth of subsurface damage layers in monocrystal silicon grinding processes on an atomic scale. The results show that when the cutting edge radius decreases in the nanometric grinding process with the same cut-depth and grinding speed, the depth of the damage layers and the potential energy between the silicon atoms decrease too. Also, when the cut depth increases, both the depth of the damage layers and the potential energy between silicon atoms increase. When the grinding speed is between 20 and 200m/s,the depth of the damage layers does not change much with the increase of the grinding speed under the same cutting edge radius and cut depth conditions. This means that the MD simulation is not sensitive to changes in the grinding speed, and thus increasing the grinding speed properly can shorten the sion,the subsurface damage of monocrystal silicon is silicon atoms, which is verified by the ultra-precision simulation time and enlarge the simulation scale. In conclumainly based on the change of the potential energy between grinding and CMP experiments.
基金Project(JCKY2016212A506-0503) supported by the Science Challenge Project of ChinaProject(51475106) supported by the National Natural Science Foundation of China
文摘Subsurface defects were fluorescently tagged with nanoscale quantum dots and scanned layer by layer using confocal fluorescence microscopy to obtain images at various depths. Subsurface damage depths of fused silica optics were characterized quantitatively by changes in the fluorescence intensity of feature points. The fluorescence intensity vs scan depth revealed that the maximum fluorescence intensity decreases sharply when the scan depth exceeds a critical value. The subsurface damage depth could be determined by the actual embedded depth of the quantum dots. Taper polishing and magnetorheological finishing were performed under the same conditions to verify the effectiveness of the nondestructive fluorescence method. The results indicated that the quantum dots effectively tagged subsurface defects of fused-silica optics, and that the nondestructive detection method could effectively evaluate subsurface damage depths.
