期刊文献+
共找到5篇文章
< 1 >
每页显示 20 50 100
亚麻籽皮中可溶性膳食纤维测定方法改进研究
1
作者 梁霞 栗红喻 《粮油食品科技》 北大核心 2013年第5期78-80,共3页
采用GB/T 5009.88《食品中膳食纤维的测定》方法测定亚麻籽皮中可溶性膳食纤维含量时,由于样品中可溶性膳食纤维亚麻胶含量大,酶解后样液中黏稠的可溶性胶液与不溶性残渣无法过滤分离而得不到准确的测定结果。本方法对酶解后样液采用多... 采用GB/T 5009.88《食品中膳食纤维的测定》方法测定亚麻籽皮中可溶性膳食纤维含量时,由于样品中可溶性膳食纤维亚麻胶含量大,酶解后样液中黏稠的可溶性胶液与不溶性残渣无法过滤分离而得不到准确的测定结果。本方法对酶解后样液采用多次离心分离、洗脱的方式分离可溶性膳食纤维。对影响分离可溶性膳食纤维效果的因素包括离心次数、蒸馏水添加量、洗脱次数进行了单因素和正交实验,得到最佳分离条件为:离心次数3次,蒸馏水添加量15mL,残渣洗脱次数4次。 展开更多
关键词 亚麻籽皮 胶质 可溶性膳食纤维 离心分离 洗脱
下载PDF
亚麻膳食纤维制备工艺研究 被引量:2
2
作者 梁霞 李群 许光映 《粮油食品科技》 北大核心 2013年第4期57-60,共4页
以亚麻籽皮为原料,对原料中所富含的可溶性亚麻胶及不溶性亚麻膳食纤维进行分级提取与分离。对影响亚麻胶得率的因素(浸提温度、浸提时间、料液比、浸提次数)进行了单因素及正交实验,得出最优浸提工艺为:浸提温度90℃,浸提时间20 min,... 以亚麻籽皮为原料,对原料中所富含的可溶性亚麻胶及不溶性亚麻膳食纤维进行分级提取与分离。对影响亚麻胶得率的因素(浸提温度、浸提时间、料液比、浸提次数)进行了单因素及正交实验,得出最优浸提工艺为:浸提温度90℃,浸提时间20 min,料液比1∶15,脱胶次数2次,亚麻胶得率为21.1%。对不溶性亚麻膳食纤维进行干燥方法的对比研究,采用乙醇沉淀并离心风干进行干燥处理。采用挤压膨化及超细粉碎技术对不溶性亚麻膳食纤维进行改性研究,结果表明,超细粉碎后不溶性亚麻膳食纤维的持水力为728.45%、溶胀性为14.67 mL/g,分别较粉碎前提高了28.4%和36.5%。 展开更多
关键词 亚麻籽皮 可溶性亚麻 不溶性亚麻膳食纤维 挤压膨化 超细粉碎 改性 持水力 溶胀性
下载PDF
亚麻胶浸提工艺研究 被引量:9
3
作者 梁霞 李群 许光映 《食品工程》 2011年第2期11-13,共3页
以亚麻籽皮为原料,水为浸提溶剂,浸提亚麻胶。研究了浸提时间、温度、料液质量比、脱胶次数对亚麻胶得率的影响,确定亚麻胶提取最佳工艺条件为:浸提温度80℃、时间40 min、料液质量比1∶15、脱胶次数2次。
关键词 亚麻籽皮 亚麻 微波加热 浸提工艺
下载PDF
亚麻胶提取工艺研究 被引量:6
4
作者 李群 胡晓军 +1 位作者 许光映 高忠东 《食品科技》 CAS 北大核心 2013年第7期278-282,共5页
提出了以亚麻籽皮为原料提取亚麻胶的新工艺。亚麻籽经脱皮、皮壳分离、冷榨脱脂、粉碎、水提、胶液分离、浓缩、醇沉、真空干燥、粉碎得到了纯度较高的亚麻胶。单因素和正交实验结果表明:颗粒度30~50目,固液比1:13,沸水提取2次后,离... 提出了以亚麻籽皮为原料提取亚麻胶的新工艺。亚麻籽经脱皮、皮壳分离、冷榨脱脂、粉碎、水提、胶液分离、浓缩、醇沉、真空干燥、粉碎得到了纯度较高的亚麻胶。单因素和正交实验结果表明:颗粒度30~50目,固液比1:13,沸水提取2次后,离心分离,醇沉干燥后得到的亚麻胶黏度为6200mPa·s。通过该工艺处理后的亚麻籽皮粉末无需干燥,可直接提取木酚素。 展开更多
关键词 亚麻籽皮 亚麻 脱脂 分离因数 醇沉
原文传递
Effect of Different Levels of Flax Seed Powder as a Source of Omega-3 on the Carcass Characteristics of Karadi Lambs
5
作者 Amera Mohammad Saleh Al-Rubeit Heron Ghazi Zahir 《Journal of Agricultural Science and Technology(A)》 2012年第10期1189-1196,共8页
This experiment was conducted at College of Agriculture, University of Sulaimany to study the effect of different levels of Flax seed powder (FP) as a source of omega-3 on the carcass characteristics of Karadi Iambs... This experiment was conducted at College of Agriculture, University of Sulaimany to study the effect of different levels of Flax seed powder (FP) as a source of omega-3 on the carcass characteristics of Karadi Iambs. It used 20 male Karadi lambs, with an average live-weight of 28 ± 0.398 kg and 4-5 months. They were randomly distributed to 4 treatments. FP was supplemented at the levels of 3%, 6% and 9% compared with the control group for 88 days. At the end of the experiment 12 lambs were slaughtered after overnight fasting of feed. Carcasses were chilled for 24 h at 4 ℃. Then, several measurements of carcass characteristics were taken. The results showed: no significant differences have been shown in relation to daily feed intake, live weight gain and feed conversion ratio. The treatment 9% recorded the highest in hot carcass weight (HCW) and cold carcass weight (CCW), rib eye area (REA) and the lowest fat thickness of subcutaneous fat as compared to other treatments. While, no significant differences in dressing percentage (DP) were seen between treatments. Generally percentage of tail fat related to carcass weight and subcutaneous fat to intermuscular fat ratio decreased with FP supplementation. About carcass cuts, significant (P 〈 0.05) differences were seen in percentage of major carcass cuts (leg, rack, loin and shoulder) and secondary cuts (neck, foreshank, flank and breast cuts) relative to cold carcass weight. It can be concluded that using Flax seed powder (FP) as a source of omega-3 supplementation improved carcass characteristics and efficiency of meat production. 展开更多
关键词 Flaxseed powder omega-3 carcass characteristics Karadi lambs.
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部