三聚氰胺生产方法的比较

对国内现有的三聚氰胺生产装置进行了分析比较 。

聚苯胺加工性的研究

用溶液浇铸法、高压法和电化学法研究和探讨了聚苯胺加工工艺。应用所设计的电解槽进行直接反应成型,可得到综合性能优越的聚苯胺板材。

Synthesis and structural characterization of macroporous bioactive glass

Porous sol-gel glass of CaO-SiO2-P2O5 system with macropores larger than 100 μm was prepared by adding stearic acid as pore former when the sintering was carried out at 700 ℃ for 3h.The sol-gel porous glass shows an amorphous structure. The diameter of the pore created by pore former varies from 100 to 300 μm, and macroporous glass has a narrow and small pore size distribution in mesoporous scale. The porosity and pore size of macroporous bioactive glass can be controlled.

Sensitivity Analysis and Optimization of Geometric Parameters of a New Fluid Bag Buffer Mechanism on Buffering Performance

A new fluid bag buffer mechanism,which can provide large axial stiffness under the small displacement,is designed.The dynamic change laws of the mechanism stiffness and the internal pressure of the fluid bag are studied when it is subjected to impact load.According to the protection performance for the flexible joint and the pressure change in the fluid bag during the impact process,the sensitivity of the geometric parameters of the fluid bag to the axial stiffness is analyzed by using the orthogonal experimental method,and the optimal parameter combination of the geometric parameters of the fluid bag under impact is obtained,leading to the displacement of the inner shell reduce by 41.4%.The results show that the internal pressure of the fluid bag is a rising process of oscillation and fluctuation.The sensitivity of the geometric parameters of the fluid bag to the displacement of the inner shell from high to low is as follows:Height H,radius r,wall thickness t,chamfer A.The correlation between the geometric parameters of the fluid bag and its internal pressure is:H is negatively correlated with the internal pressure,while the r,t,and A are positively correlated with the internal pressure.

Do we really understand the role of the oesophagogastric junction in disease?

The role of the oesophago-gastric junction (OGJ) in gastro-oesophageal reflux disease is still not completely understood, and there is no clinically used method to assess the OGJ function in patients. Only indirect methods such as pH studies are carried out. The OGJ acts a valve controlling the flow of solids, liquids and gases between the oesophagus and the stomach. Manometry can determine if a sphincter is toned or relaxed; but, it cannot confirm that the sphincter region is actually open. Distension is a new technique for measuring function in the OGJ. By measuring the cross-sectional area through the narrow region in the junction during distension of a catheter mounted bag, much more information on the opening and closing patterns of the junction can be determined. This technique has already been demonstrated to show changes in the OGJ after surgical treatments for reflux disease. New measurement ideas around the concept of distending the OGJ offer new hope that a clinically useable test for compliance at the junction can be developed and could potentially help in determining appropriate therapy.

Single-jet Spray Mixing with a Confined Crossflow

In order to achieve uniform mixing between spray droplets and crossflow, cold-model experiment of a hollow-cone water spray in an air crossflow is investigated via a numerical simulation. The simulation cases are designed by using the orthogonal design method. The Eulerian-Lagrangian formulation is employed for modeling the droplets-crossflow two-phase flow while the realizable k-ε turbulence model is used to describe the turbulence. A new index, mixedness quality, is proposed to assess the overall mixing of the droplets in the crossflow. The simulation results demonstrate that the counter-rotating vortex pair (CVP) imposes a more significant impact on the spatial distribution than on the size distribution of the droplets. Pairs of CVP with smaller scales are preferable for achieving a better mixing. The influencing factors are listed in the following order in terms of the degree of their impact from the greatest to the least: the Sauter diameter of the initial droplets, the mixing tube diameter, the spray angle, the velocity of the inlet crossflow, and the vertical velocity of the initial droplets. A moderate droplet diameter, a smaller tube diameter, a moderate spray angle, a greater crossflow velocity and a moderate vertical velocity of the droplet are favorable for achieving a higher mixedness quality of the jet spray in a confined crossflow.

Establishment of Automated Multi-Range Multipliers Combined with TVC

An automated multi-range multipliers（range resistors）system is established for the AC voltage measurements by using a thermal voltage converter.It is performed automatically by selecting the appropriate multiplier whose voltage range contains the voltage to be measured without changing it manually through a new designed system.It consists of control part through a micro-controller controlled by specified prepared Lab-VIEW program and switching part through electronic relays in one circuit as clearly described in this work.It is used for measuring the ac voltage in the range from 1 V to 200 V.Also,it can be used for the voltage ranges up to 1 000 V by putting some factors into consideration.The AC-DC transfer differences for these multipliers combined with thermal voltage converter are determined automatically against another standard thermal voltage converter by using another Lab-VIEW program.

An Extraction of the Dominant Rotor-Stator Interaction Modes by the Use of Proper Orthogonal Decomposition (POD)

The Proper Orthogonal Decomposition method is applied to the instantaneous velocity field within the rotor-stator inter-row region of a high-speed high-pressure centrifugal compressor. The processed data come from experiments and numerical simulations. In comparison with a Fourier transform, the POD gives the best modal approximation for both initial fields, in terms of the energy expressed on any given number of modes to be taken into account： to reach 98% of the total energy of the velocity field, the required number of POD modes is around nine times smaller than the number of Fourier harmonics. The individual POD modes are given and show that the unsteady rotor-stator interaction is already present in the very first modes.

Robustness of orthogonal matching pursuit under restricted isometry property

Orthogonal matching pursuit （OMP） algorithm is an efficient method for the recovery of a sparse signal in compressed sensing, due to its ease implementation and low complexity. In this paper, the robustness of the OMP algorithm under the restricted isometry property （RIP） is presented. It is shown that 5K＋V/KOK,1 〈 1 is sufficient for the OMP algorithm to recover exactly the support of arbitrary /（-sparse signal if its nonzero components are large enough for both 12 bounded and lz~ bounded noises.