The thrust and the torque of various carbide drills are studied for the high-speed drilling of fiber reinforced epoxy composites. The orthogonal experiment is carried out with different feed speeds at high rotation sp...The thrust and the torque of various carbide drills are studied for the high-speed drilling of fiber reinforced epoxy composites. The orthogonal experiment is carried out with different feed speeds at high rotation speed. Experimental results show that the spindle rotation speed is the most influential factor. The thrust andthe torque decrease under the condition of high rotation rate. With the decrease of the feed speed, the thrust and the torque decrease. But the effect of the feed speed is less than that of the spindle rotation rate. Moreover, the effect of drill materials on the thrust and the torque is more notable than that of the drill geometries and the feed speed. The thrust is greatly affected by the feed speed while the torque is obviously affected by drill geometries.展开更多
[Objective] The aim was to explore rapeseed varieties adapting to local conditions, with optimal yielding capacity and growth period. [Method] The research performed analysis on yield, yielding components, and interac...[Objective] The aim was to explore rapeseed varieties adapting to local conditions, with optimal yielding capacity and growth period. [Method] The research performed analysis on yield, yielding components, and interaction effects in different groups and test sites based on hybrid rapeseeds in Mianyang during 2012-2015.[Conclusion] Mianyou 33, Mianyou 88 and Mianyou 309 showed insignificant differences in yield. The analysis of variance suggested that yield of Mianyou 309 was the highest and the variety was suitable to be planted in high erucic acid rapeseed bases. Mianyou 88 and Mianyou 33 are double-low varieties, characterized by high and stable yielding. [Conclusion] The research provides references for rapeseed production in hilly areas in Sichuan Province.展开更多
A modified Gurson-Tvergaard-Needleman （GTN） model that accounts for the mixed （isotropic and kinematic） hardening of cast steel GS-20Mn5V was developed and implemented in the finite dement program ABAQUS/Standard ...A modified Gurson-Tvergaard-Needleman （GTN） model that accounts for the mixed （isotropic and kinematic） hardening of cast steel GS-20Mn5V was developed and implemented in the finite dement program ABAQUS/Standard via a user-defined material subroutine UMAT. This model couples the stress state and damage evolution （pore volume fraction increase） by a classic method that assumes that the total void volume fraction is divided into a nucleation and a growth part. A parametric study was conducted to assess the effect of modified GTN model parameters on mechanical properties such as the nucleation, growth and coalescence of voids and to obtain the optimal parameter combination by the orthogonal test method. The predicted load-displacement curves of notched specimens with the optimal parameters are favorably compared to the experimental curves. Therefore, the modified GTN model can be used to predict the damage evaluation and fracture behavior of GS-20Mn5V.展开更多
In ultrasonic extraction technology, optimization of technical parameters often considers extraction medium only, without including ultrasonic parameters. This paper focuses on controlling the ultrasonic extraction pr...In ultrasonic extraction technology, optimization of technical parameters often considers extraction medium only, without including ultrasonic parameters. This paper focuses on controlling the ultrasonic extraction process of puerarin, investigating the influence of ultrasonic parameters on extraction rate, and empirically analyzing the main components of Pueraria, i.e., isoflavone compounds. A method is presented combining orthogonal experi- mental design with a support vector machine and a predictive model is established for optimization of technical parameters. From the analysis with the predictive model, appropriate process parameters are achieved for higher extraction rate. With these parameters in the ultrasonic extraction of puerarin, the experimental result is satisfactory. This method is of significance to the study of extracfing root-stock plant medicines.展开更多
This paper selected lumbers of Manchurian ash (Fraxinus rnandshurica), Manchurian walnut(Juglans mandshurica) and Spruce (Picea jezoensis var.kornarovii) for manufacturing glulam with water-borne polymeric-isocyanate ...This paper selected lumbers of Manchurian ash (Fraxinus rnandshurica), Manchurian walnut(Juglans mandshurica) and Spruce (Picea jezoensis var.kornarovii) for manufacturing glulam with water-borne polymeric-isocyanate adhesive to determine process variables. The process variables that includespecific pressure, pressing time and adhesive application amount influencing the shear strength of the glulam,were investigated through the orthogonal test. The results indicated that optimum process variables forglulam manufacturing were as follows: Specific pressure of 1.5 MPa for Spruce and 2.0 MPa both forManchurian ash and Manchurian walnut, pressing time of 60 min and adhesive application amount of 250 g/m2.展开更多
文摘The thrust and the torque of various carbide drills are studied for the high-speed drilling of fiber reinforced epoxy composites. The orthogonal experiment is carried out with different feed speeds at high rotation speed. Experimental results show that the spindle rotation speed is the most influential factor. The thrust andthe torque decrease under the condition of high rotation rate. With the decrease of the feed speed, the thrust and the torque decrease. But the effect of the feed speed is less than that of the spindle rotation rate. Moreover, the effect of drill materials on the thrust and the torque is more notable than that of the drill geometries and the feed speed. The thrust is greatly affected by the feed speed while the torque is obviously affected by drill geometries.
基金Supported by National Rapeseed Industry System Construction Program(CARS-13)Crop Breeding Project in Sichuan during the 12~(th) Five-year Plan(2011YZGG005)Sichuan Innovation Team Program(2014-2018)~~
文摘[Objective] The aim was to explore rapeseed varieties adapting to local conditions, with optimal yielding capacity and growth period. [Method] The research performed analysis on yield, yielding components, and interaction effects in different groups and test sites based on hybrid rapeseeds in Mianyang during 2012-2015.[Conclusion] Mianyou 33, Mianyou 88 and Mianyou 309 showed insignificant differences in yield. The analysis of variance suggested that yield of Mianyou 309 was the highest and the variety was suitable to be planted in high erucic acid rapeseed bases. Mianyou 88 and Mianyou 33 are double-low varieties, characterized by high and stable yielding. [Conclusion] The research provides references for rapeseed production in hilly areas in Sichuan Province.
基金The National Key Research and Development Program of China(No.2017YFC0805103)the National Natural Science Foundation of China(No.51578137,51438002,51108075)the Open Research Fund Program of Jiangsu Key Laboratory of Engineering Mechanics
文摘A modified Gurson-Tvergaard-Needleman （GTN） model that accounts for the mixed （isotropic and kinematic） hardening of cast steel GS-20Mn5V was developed and implemented in the finite dement program ABAQUS/Standard via a user-defined material subroutine UMAT. This model couples the stress state and damage evolution （pore volume fraction increase） by a classic method that assumes that the total void volume fraction is divided into a nucleation and a growth part. A parametric study was conducted to assess the effect of modified GTN model parameters on mechanical properties such as the nucleation, growth and coalescence of voids and to obtain the optimal parameter combination by the orthogonal test method. The predicted load-displacement curves of notched specimens with the optimal parameters are favorably compared to the experimental curves. Therefore, the modified GTN model can be used to predict the damage evaluation and fracture behavior of GS-20Mn5V.
基金Supported by the National Natural Science Foundation of China(21146009,21376014)
文摘In ultrasonic extraction technology, optimization of technical parameters often considers extraction medium only, without including ultrasonic parameters. This paper focuses on controlling the ultrasonic extraction process of puerarin, investigating the influence of ultrasonic parameters on extraction rate, and empirically analyzing the main components of Pueraria, i.e., isoflavone compounds. A method is presented combining orthogonal experi- mental design with a support vector machine and a predictive model is established for optimization of technical parameters. From the analysis with the predictive model, appropriate process parameters are achieved for higher extraction rate. With these parameters in the ultrasonic extraction of puerarin, the experimental result is satisfactory. This method is of significance to the study of extracfing root-stock plant medicines.
文摘This paper selected lumbers of Manchurian ash (Fraxinus rnandshurica), Manchurian walnut(Juglans mandshurica) and Spruce (Picea jezoensis var.kornarovii) for manufacturing glulam with water-borne polymeric-isocyanate adhesive to determine process variables. The process variables that includespecific pressure, pressing time and adhesive application amount influencing the shear strength of the glulam,were investigated through the orthogonal test. The results indicated that optimum process variables forglulam manufacturing were as follows: Specific pressure of 1.5 MPa for Spruce and 2.0 MPa both forManchurian ash and Manchurian walnut, pressing time of 60 min and adhesive application amount of 250 g/m2.
