Total harmonic distortion (THD) is one of the key technical indexes of inverter output voltage. Optimization o f switching points and filter parameters could ensure the switching-point-preset sinusoidal pulse width mo...Total harmonic distortion (THD) is one of the key technical indexes of inverter output voltage. Optimization o f switching points and filter parameters could ensure the switching-point-preset sinusoidal pulse width modulation (SPWM) inverters with low harmonyic content in theory.The THD value would be increased by switching time delay of power devices and control circuit. A new control coecuit with delay time compensation is presented in this paper. With this control scheme, the output of the inverter could be basically identified with the theory given.Test results of experimental circuit verify that the control circuit presented in this paper is feasible. The THD of the inverter output voltage could be reduced to a certain extent by this method.展开更多
This paper deals with an innovative low-loss AC switch, named as TBBS （transistor based bidirectional switch）, based on the association of super-gain BJTs developed by the GREMAN laboratory. The main characterizatio...This paper deals with an innovative low-loss AC switch, named as TBBS （transistor based bidirectional switch）, based on the association of super-gain BJTs developed by the GREMAN laboratory. The main characterization results of the super-gain BJT are reminded to identify the key parameters that are essential to build the TBBS. A complete characterization database in static mode of this new AC switch is discussed. In particular, its forward and reverse-biased features have been measured to see the evolution of the DC current gain as a function of the current density. The TBBS makes sense when using the super-gain BJT （bipolar junction transistor） in reverse mode. It means that the reverse DC current gain has to be sufficient （at least higher than l compared with the conventional BJT one）. This new AC switch is bidirectional in current and voltage, totally controllable （turn-on and turn-off） and the most attractive solution in terms of on-state power losses. Further, its manufacturing process is as easier as existing device such as triac.展开更多
AT the"International Exchanges on Open Innovation"held in San Francisco in 2015,one question was raised:"If you were an engineer and would like to make a creative idea into a product within one or two w...AT the"International Exchanges on Open Innovation"held in San Francisco in 2015,one question was raised:"If you were an engineer and would like to make a creative idea into a product within one or two weeks,which city would be your choice?"Founder&CTO of Spark Labs Global Ventures,Zachary Crockett’s answer was Shenzhen.Known as entrepreneurs’heaven,Shenzhen gives priority to innovation education and make students’dreams reality.展开更多
In this article, the replacement of the car battery by a hybrid supply is proposed. The specific power of the supercapacitor makes it very attractive for the startup of the car. This component has very high lifetime ...In this article, the replacement of the car battery by a hybrid supply is proposed. The specific power of the supercapacitor makes it very attractive for the startup of the car. This component has very high lifetime （1 million of cycles） which can improve the lifetime of the supply （for starter or starter-alternator）. After the identification of the internal combustion engine torque developed at the startup, the validation of the hybrid supply interest is proved by the simulation of the system using Matlab-Simulink software. Finally, a test bench is developed in the laboratory to validate the simulation results.展开更多
The current-induced magnetic switching is studied in Co/Cu/Co nanopillar with an in-plane magnetization traversed under the perpendicular-to-plane external field.Magnetization switching is found to take place when the...The current-induced magnetic switching is studied in Co/Cu/Co nanopillar with an in-plane magnetization traversed under the perpendicular-to-plane external field.Magnetization switching is found to take place when the current density exceeds a threshold.By analyzing precessional trajectories,evolutions of domain walls and magnetization switching times under the perpendicular magnetic field,there are two different magnetization switching modes:nucleation and domain wall motion reversal;uniform magnetization reversal.The first mode occurs at lower current density,which is realized by the formation of the reversal nucleus and domain wall motion;while the second mode occurs through complete magnetization reversal at higher current density.Furthermore,the switching time reduces as the spin-polarized current density increases,which can also be grouped into two reversal modes.展开更多
文摘Total harmonic distortion (THD) is one of the key technical indexes of inverter output voltage. Optimization o f switching points and filter parameters could ensure the switching-point-preset sinusoidal pulse width modulation (SPWM) inverters with low harmonyic content in theory.The THD value would be increased by switching time delay of power devices and control circuit. A new control coecuit with delay time compensation is presented in this paper. With this control scheme, the output of the inverter could be basically identified with the theory given.Test results of experimental circuit verify that the control circuit presented in this paper is feasible. The THD of the inverter output voltage could be reduced to a certain extent by this method.
文摘This paper deals with an innovative low-loss AC switch, named as TBBS （transistor based bidirectional switch）, based on the association of super-gain BJTs developed by the GREMAN laboratory. The main characterization results of the super-gain BJT are reminded to identify the key parameters that are essential to build the TBBS. A complete characterization database in static mode of this new AC switch is discussed. In particular, its forward and reverse-biased features have been measured to see the evolution of the DC current gain as a function of the current density. The TBBS makes sense when using the super-gain BJT （bipolar junction transistor） in reverse mode. It means that the reverse DC current gain has to be sufficient （at least higher than l compared with the conventional BJT one）. This new AC switch is bidirectional in current and voltage, totally controllable （turn-on and turn-off） and the most attractive solution in terms of on-state power losses. Further, its manufacturing process is as easier as existing device such as triac.
文摘AT the"International Exchanges on Open Innovation"held in San Francisco in 2015,one question was raised:"If you were an engineer and would like to make a creative idea into a product within one or two weeks,which city would be your choice?"Founder&CTO of Spark Labs Global Ventures,Zachary Crockett’s answer was Shenzhen.Known as entrepreneurs’heaven,Shenzhen gives priority to innovation education and make students’dreams reality.
文摘In this article, the replacement of the car battery by a hybrid supply is proposed. The specific power of the supercapacitor makes it very attractive for the startup of the car. This component has very high lifetime （1 million of cycles） which can improve the lifetime of the supply （for starter or starter-alternator）. After the identification of the internal combustion engine torque developed at the startup, the validation of the hybrid supply interest is proved by the simulation of the system using Matlab-Simulink software. Finally, a test bench is developed in the laboratory to validate the simulation results.
基金supported by the National Natural Science Foundation of China (Grant No. 5042810)
文摘The current-induced magnetic switching is studied in Co/Cu/Co nanopillar with an in-plane magnetization traversed under the perpendicular-to-plane external field.Magnetization switching is found to take place when the current density exceeds a threshold.By analyzing precessional trajectories,evolutions of domain walls and magnetization switching times under the perpendicular magnetic field,there are two different magnetization switching modes:nucleation and domain wall motion reversal;uniform magnetization reversal.The first mode occurs at lower current density,which is realized by the formation of the reversal nucleus and domain wall motion;while the second mode occurs through complete magnetization reversal at higher current density.Furthermore,the switching time reduces as the spin-polarized current density increases,which can also be grouped into two reversal modes.
