Twenty-four provenances of two species （Azadirachta siamensis and Azadirachta indica） have been introduced to China from South Asia, Southeast Asia and Africa Since 1995. This paper summarizes the researches on the ...Twenty-four provenances of two species （Azadirachta siamensis and Azadirachta indica） have been introduced to China from South Asia, Southeast Asia and Africa Since 1995. This paper summarizes the researches on the introduction and planting of Azadirachta indica and analyzes the morphological, phenological characteristics, the growth rhythm, pollinating and seed yielding features of the intro- duced 24 provenances of the two species as well as the variations of filial generation plants. The experiments showed that most of the prove- nances of,4. indica have normal growth and can blossom and fruit in the dry-hot valleys with tropical climate conditions in Yunnan Province, China. The normal regions for A. indica were classified and the selection criteria for superior plants were put forward in this paper, more- over, the major contents of industry planning and technical approaches for A. indica plantation establishment were discussed and the countermeasures to reduce the neem-based pesticide products were also proposed.展开更多
AIM To evaluate the association between mortality-to-incidence ratios(MIRs) and health disparities.METHODS In this study, we used the GLOBOCAN 2012 database to obtain the cancer incidence and mortality data for 57 cou...AIM To evaluate the association between mortality-to-incidence ratios(MIRs) and health disparities.METHODS In this study, we used the GLOBOCAN 2012 database to obtain the cancer incidence and mortality data for 57 countries, and combined this information with the World Health Organization(WHO) rankings and total expenditures on health/gross domestic product(e/GDP). The associations between variables and MIRs were analyzed by linear regression analyses and the 57 countries were selected according to their data quality. RESULTS The more developed regions showed high gastric cancer incidence and mortality crude rates, but lower MIR values than the less developed regions(0.64 vs 0.80, respectively). Among six continents, Oceania had the lowest(0.60) and Africa had the highest(0.91) MIR. A good WHO ranking and a high e/GDP were significantly associated with low MIRs(P = 0.001 and P = 0.001, respectively).CONCLUSION The MIR variation for gastric cancer would predict regional health disparities.展开更多
Selection of materials,as an area of design research,has been under considerable interest over the years.Materials selection is one of the most important activities in the product development process.Inappropriate dec...Selection of materials,as an area of design research,has been under considerable interest over the years.Materials selection is one of the most important activities in the product development process.Inappropriate decision of materials can cause the product to be reproduced or remanufactured.To avoid this circumstance,one of the useful tools that can be employed in determining the most appropriate material is analytical hierarchy process(AHP).To illustrate the application of AHP,six different types of composite materials were considered.The most appropriate one for suitability of use in manufacturing automotive bumper beam was determined by considering eight main selection factors and 12 sub-factors.The AHP analysis reveals that the glass fibre epoxy is the most appropriate material because it has the highest value(25.7%,mass fraction) compared with other materials.The final material is obtained by performing six different scenarios of the sensitivity analysis.It is proved that glass fibre epoxy is the most optimum decision.展开更多
In order to reduce energy consumption and protect the human survival environment, the lightweight has became the development trend of the world automobile industry. On the premise of ensuring the strength, safety and ...In order to reduce energy consumption and protect the human survival environment, the lightweight has became the development trend of the world automobile industry. On the premise of ensuring the strength, safety and driving performance of the car, the major car enterprises try to reduce the curb weight of the ear, fuel consumption and emissions. Not only a lot of new technologies and new products have been generated, but also joint vehicle development process and computer aided engineering （CAE） analysis technology have been developed. Since the entry into the ＂Au- tomobile Lightweight Technology Innovation Strategic Alliance＂ in Dec. 2007, Geely Group has been focusing on light- weight construction of vehicle and key assemblies in every stage of the vehicle product development. Among vehicles ap- peared on the market and in research, it has presented continuously better performance. The paper describes application examples and successful experience of CAE simulation analysis and performance optimization during the lightweight de- sign and development of a self-developed model of Geely, and looks forward to the prospects for the development of lightweight of Geely vehicle.展开更多
In a production process, the actual energy consumption is greatly affected by the production state. Certain processing operations are classified into six states, including normal production, abnormal production, plann...In a production process, the actual energy consumption is greatly affected by the production state. Certain processing operations are classified into six states, including normal production, abnormal production, planned overhaul, unplanned overhaul, transitional period from unplanned overhaul to normal production (referred for short as unplanned transition) and transitional period from planned overhaul to normal production (referred for short as planned transition). The article takes the analysis of relationship between different states of a certain processing operation and corresponding energy consumptions as a startup point to develop a process energy intensity formula with variables of operating rate, yielding rate and operating frequency, etc. This process energy intensity formula can be used to analyze effectively the pattern of impact exerted by different state variables on energy consumption.展开更多
The zebra mussel is an important aquatic pest that causes great damage to freshwater-dependent industries, due to biofouling. The main goal of the project discussed here is to develop improved solutions to control thi...The zebra mussel is an important aquatic pest that causes great damage to freshwater-dependent industries, due to biofouling. The main goal of the project discussed here is to develop improved solutions to control this species. Three approaches have been explored in an attempt to design innovative application strategies for existing biocides： （i） encapsulation of toxins; （ii） combination of toxins; （iii） investigation of the seasonal variation of the species＇ tolerance to toxins. In this paper, the principles behind these approaches and the major results on each topic are presented. The benefits of adopting a chemical product engineering approach in conducting this project are also discussed.展开更多
基金National Science & Technology Supporting Project (2006BAD18B03)Science & Technology Plan Projects of Yunnan province (2005YX20)
文摘Twenty-four provenances of two species （Azadirachta siamensis and Azadirachta indica） have been introduced to China from South Asia, Southeast Asia and Africa Since 1995. This paper summarizes the researches on the introduction and planting of Azadirachta indica and analyzes the morphological, phenological characteristics, the growth rhythm, pollinating and seed yielding features of the intro- duced 24 provenances of the two species as well as the variations of filial generation plants. The experiments showed that most of the prove- nances of,4. indica have normal growth and can blossom and fruit in the dry-hot valleys with tropical climate conditions in Yunnan Province, China. The normal regions for A. indica were classified and the selection criteria for superior plants were put forward in this paper, more- over, the major contents of industry planning and technical approaches for A. indica plantation establishment were discussed and the countermeasures to reduce the neem-based pesticide products were also proposed.
文摘AIM To evaluate the association between mortality-to-incidence ratios(MIRs) and health disparities.METHODS In this study, we used the GLOBOCAN 2012 database to obtain the cancer incidence and mortality data for 57 countries, and combined this information with the World Health Organization(WHO) rankings and total expenditures on health/gross domestic product(e/GDP). The associations between variables and MIRs were analyzed by linear regression analyses and the 57 countries were selected according to their data quality. RESULTS The more developed regions showed high gastric cancer incidence and mortality crude rates, but lower MIR values than the less developed regions(0.64 vs 0.80, respectively). Among six continents, Oceania had the lowest(0.60) and Africa had the highest(0.91) MIR. A good WHO ranking and a high e/GDP were significantly associated with low MIRs(P = 0.001 and P = 0.001, respectively).CONCLUSION The MIR variation for gastric cancer would predict regional health disparities.
基金the financial support through Research University Grant Scheme 2007 (RUG 2007) with vote number 91045
文摘Selection of materials,as an area of design research,has been under considerable interest over the years.Materials selection is one of the most important activities in the product development process.Inappropriate decision of materials can cause the product to be reproduced or remanufactured.To avoid this circumstance,one of the useful tools that can be employed in determining the most appropriate material is analytical hierarchy process(AHP).To illustrate the application of AHP,six different types of composite materials were considered.The most appropriate one for suitability of use in manufacturing automotive bumper beam was determined by considering eight main selection factors and 12 sub-factors.The AHP analysis reveals that the glass fibre epoxy is the most appropriate material because it has the highest value(25.7%,mass fraction) compared with other materials.The final material is obtained by performing six different scenarios of the sensitivity analysis.It is proved that glass fibre epoxy is the most optimum decision.
基金Supporting Program of the"Twelfth Five-year Plan"for Sci & Tech Research of China(No. 2011BAG03B02No.2011BAG03B06)
文摘In order to reduce energy consumption and protect the human survival environment, the lightweight has became the development trend of the world automobile industry. On the premise of ensuring the strength, safety and driving performance of the car, the major car enterprises try to reduce the curb weight of the ear, fuel consumption and emissions. Not only a lot of new technologies and new products have been generated, but also joint vehicle development process and computer aided engineering （CAE） analysis technology have been developed. Since the entry into the ＂Au- tomobile Lightweight Technology Innovation Strategic Alliance＂ in Dec. 2007, Geely Group has been focusing on light- weight construction of vehicle and key assemblies in every stage of the vehicle product development. Among vehicles ap- peared on the market and in research, it has presented continuously better performance. The paper describes application examples and successful experience of CAE simulation analysis and performance optimization during the lightweight de- sign and development of a self-developed model of Geely, and looks forward to the prospects for the development of lightweight of Geely vehicle.
文摘In a production process, the actual energy consumption is greatly affected by the production state. Certain processing operations are classified into six states, including normal production, abnormal production, planned overhaul, unplanned overhaul, transitional period from unplanned overhaul to normal production (referred for short as unplanned transition) and transitional period from planned overhaul to normal production (referred for short as planned transition). The article takes the analysis of relationship between different states of a certain processing operation and corresponding energy consumptions as a startup point to develop a process energy intensity formula with variables of operating rate, yielding rate and operating frequency, etc. This process energy intensity formula can be used to analyze effectively the pattern of impact exerted by different state variables on energy consumption.
基金the Portuguese Foundation for Science and Technology (scholarship SFRH/BD/18731/2004 and Research Project Grant POCI/EQU/59305/2004).
文摘The zebra mussel is an important aquatic pest that causes great damage to freshwater-dependent industries, due to biofouling. The main goal of the project discussed here is to develop improved solutions to control this species. Three approaches have been explored in an attempt to design innovative application strategies for existing biocides： （i） encapsulation of toxins; （ii） combination of toxins; （iii） investigation of the seasonal variation of the species＇ tolerance to toxins. In this paper, the principles behind these approaches and the major results on each topic are presented. The benefits of adopting a chemical product engineering approach in conducting this project are also discussed.
