基于情绪导向的产品设计色彩研究

本论文通过色彩情绪化导向进行分析,更为深入透过产品色彩的情绪导向应用原则去挖掘产品设计色彩背后的情绪化表现意义,为我国未来产品设计色彩情绪化导向设计提供更为广阔的发展空间。

A FORMAL REPRESENTATION FOR FEATURE-BASED DESIGN

Feature based design has been regarded as a promising approach for CAD/CAM integration.This paper aims to establish a domain independent representation formalism for feature based design in three aspects: formal representation,design process model and design algorithm.The implementing scheme and formal description of feature taxonomy,feature operator,feature model validation and feature transformation are given in the paper.The feature based design process model suited for either sequencial or concurrent engineering is proposed and its application to product structural design and process plan design is presented. Some general design algorithms for developing feature based design system are also addressed.The proposed scheme provides a formal methodology elementary for feature based design system development and operation in a structural way.

WEB-BASED MANUFACTURING PROCESS DEVELOPER

Product and manufacturing process developments are knowledge intensive. For rapid product developments in today′s competitive global marketplace, we need tools to facilitate the effective utilization of critical design and manufacturing knowledge obtained during the previous product developments. The Internet technology has very rapidly evolved over past few years. The web is being increasingly used to support various activities of the pro duct development process. Java is a programming language that is highly tuned for the web environment. This paper is concerned with providing the solution of web based manufacturing process development. The architecture of web based application and the implementation of web based manufacturing process developer are discussed.

Grey-theory based algorithm for impact assessment of green design

Life cycle assessment (LCA) is an important content of green design;the major phase of LCA is impact assessment. After classifying the impact factors, with grey-system theory, the evaluating grey-groups and their whitening weighing functions are defined;the grey-cluster analysis of each classified impact is performed;based on analyzing results, the calculating method of classified impact index is given. By range of action, the impact classes are grouped to three groups - global impact, regional impact, and local impact;the calculating methods of grouped and overall impact index are presented. Finally, an application example of comparative choice of a category of products - three materials, steel, aluminum and engineering plastics is given.

RESEARCH OF THE PARAMETRIC ASSEMBLY METHOD

The parametric part assembly generation method is presented. Based on the parametric part generated by means of constructive-element, through interactively inputting the relationships of the location and the assembly, and by compiling operations like movement and rotation, the assembly drawing is created so as to implement the occurrence of the parameterizations of the assembly and the part drawing. The data structure of the assembly part and the key technologies of hidden line removal in the implementation of assembly process, etc. , are described in detail.

New LCA Approach with Fuzzy Evaluation

A quantitative and comprehensive method of product life cycle assessment(LCA) with fuzzy theory is developed, which will help designers to select the optimum design scheme for product life cycle design(LCD). Based on the theory of multiple attribute decision making, an algorithm of comprehensive and comparative evaluation for product environmental adaptability is presented. A program is built and used in an example of design improvement. The result shows that the proposed method and algorithm are practical and effective to the development of green products.

中宣部提出媒体融合发展五项要求

近日,中宣部组织多家中央媒体召开媒体融合发展座谈会,对媒体融合工作提出新的要求:一要立足于整合资源。各媒体拥有丰富优质的新闻资源,设计融合发展项目,要充分考虑如何整合各种资源,依靠资源优势占领新媒体市场。二要研究设计传播渠道。必须着眼于扩大媒体覆盖面,占领新媒体、开拓新市场。

创第一品牌就是最大的和谐

和谐社会是大家都能够心情舒畅的工作、生活,每个人都感到很满意,这就是和谐社会。温总理在作《政府工作报告》的时候,凡是谈到国际地位提高,谈到“港人治港”,反对“台独”

A quantitative method for sustainable product development

A quantitative measure-based method for the design and evaluation of sustainable products is proposed. The method uses multi-criteria in product design to meet sustainable requirements from qualitative criteria to quantitative metrics. The method integrates quality function deployment concepts with the life cycle assessment to establish a quantitative method for sustainable product development. It considers both customer needs and sustainable requirements by mapping these needs into design details using the axiomatic design and benchmarking methods. The method is applied in the wheelchair design. Four popular wheelchairs in the market are selected as benchmarks and are rated based on customer needs and sustainable criteria. The design matrix identifies the relationship of functional requirements and design parameters of the wheelchair. Compared to the best benchmark product, the proposed wheelchair can reduce costs by 13.8%, environment footprints 18.55%, mass 4.5%, and components 2.2%.

A Method for Solving Computer-Aided Product Design Optimization Problem Based on Back Propagation Neural Network

Because of the powerful mapping ability, back propagation neural network (BP-NN) has been employed in computer-aided product design (CAPD) to establish the property prediction model. The backward problem in CAPD is to search for the appropriate structure or composition of the product with desired property, which is an optimization problem. In this paper, a global optimization method of using the a BB algorithm to solve the backward problem is presented. In particular, a convex lower bounding function is constructed for the objective function formulated with BP-NN model, and the calculation of the key parameter a is implemented by recurring to the interval Hessian matrix of the objective function. Two case studies involving the design of dopamine β-hydroxylase (DβH) inhibitors and linear low density polyethylene (LLDPE) nano composites are investigated using the proposed method.

A Hardware Platform Framework for an Intelligent Vehicle Based on a Driving Brain

The type, model, quantity, and location of sensors installed on the intelligent vehicle test platform are different, resulting in different sensor information processing modules, The driving map used in intelligent vehicle test platform has no uniform standard, which leads to different granularity of driving map information, The sensor information processing module is directly associated with the driving map information and decision-making module, which leads to the interface of intelligent driving system software module has no uniform standard, Based on the software and hardware architecture of intelligent vehicle, the sensor information and driving map information are processed by using the formal language of driving cognition to form a driving situation graph cluster and output to a decision-making module, and the out- put result of the decision-making module is shown as a cognitive arrow cluster, so that the whole process of intelligent driving from perception to decision-making is completed, The formalization of driving cognition reduces the influence of sensor type, model, quantity, and location on the whole software architec- ture, which makes the software architecture portable on different intelligent driving hardware platforms.

Study of Mechanical Product Rapid Design Based on Knowledge Engineering

This paper proposes a mechanical product intelligent rapid design approach based on integrated technologies. Adopting knowledge based engineering to reuse and manage product design knowledge, and combining feature modeling and parametric design based on existing CAD/CAE/CAM system and technology of product family modeling and engineering database, the system establishes a product family knowledge base, which mainly including product family case base and rule base. The system also utilizes WEB technology to let customers to individually customize products remotely through internet. And an applicable example is given in the end.

Principles and methods for stiffness modulation in soft robot design and development

Compared to traditional rigid robots, soft robots, primarily made of deformable, or less rigid materials, have good adaptability, conformability and safety in interacting with the environment. Although soft robots have shown great potentials for extended applications and possibilities that are impossible or difficult for rigid body robots, it is of great importance for them to have the capability of controllable stiffness modulation. Stiffness modulation allows soft robots to have reversible change between the compliant, or flexible state and the rigid state. In this paper, we summarize existing principles and methods for stiffness modulation in soft robotic development and divide them into four groups based on their working principles. Acoustic-based methods have been proposed as the potential fifth group in stiffness modulation of soft robots. Initial design proposals based on the proposed acoustic method are presented, and challenges in further development are highlighted.

Use of species-specific PCR for the identification of 10 sea cucumber species

We developed a species-specific PCR method to identify species among dehydrated products of 10 sea cucumber species.Ten reverse species-specific primers designed from the 16 S rRNA gene,in combination with one forward universal primer,generated PCR fragments of ca.270 bp length for each species.The specificity of the PCR assay was tested with DNA of samples of 21 sea cucumber species.Amplification was observed in specific species only.The species-specific PCR method we developed was successfully applied to authenticate species of commercial products of dehydrated sea cucumber,and was proven to be a useful,rapid,and low-cost technique to identify the origin of the sea cucumber product.

Feature-based multiresolution techniques for product design

3D computer-aided design (CAD) systems based on feature-based solid modelling technique have been widely spread and used for product design. However, when part models associated with features are used in various downstream applications, simplified models in various levels of detail (LODs) are frequently more desirable than the full details of the parts. In particular, the need for feature-based multiresolution representation of a solid model representing an object at multiple LODs in the feature unit is increasing for engineering tasks. One challenge is to generate valid models at various LODs after an arbitrary rearrangement of features using a certain LOD criterion, because composite Boolean operations consisting of union and subtraction are not commutative. The other challenges are to devise proper topological framework for multiresolution representation, to suggest more reasonable LOD criteria, and to extend applications. This paper surveys the recent research on these issues.

Importance of Touch in the Design of Pleasurable Products and Experiences

Today, the act of purchase is more and more irrational. Customers’ choices are based on emotional and multisensorial features, particularly on touch, which is the most emotional sense. Then it is essential in the design process to work on shapes, materials, textures to make users living pleasant experiences in all contact areas of the product. It’s also essential to consider the dynamic aspect of touch to follow the body and generate pleasant tactile effects. Finally, how can we introduce touch in the design process considering companies’ know-how, culture and subjectivity of each actor of new product creation?

Web-services-based Integration Design of PDM and DNC Systems

In a networked manufacturing environment, product data integration is the foundation of collaborative manufacturing among manufacturing enterprises. It is very important to build an effective integration mechanism for product data sharing of manufacturing enterprises in geographically dispersed, heterogeneous system platform. In order to integrate enterprise level product data management (PDM) system and shop floor level distributed numerical control (DNC) system, based on the description of Web services technology, a Web-services-based integration approach is presented for facilitating seamless sharing of product data between PDM and DNC systems in a networked manufacturing environment. In order to verify the validity of the proposed approach, an example-based integration development has been implemented with Java 2 Software Development Kit and Java Web Services Developer Pack in Windows 2000 Professional environment.

Manufacturers’channel selections under the influence of the platform with big data analytics

To obtain the platform s big data analytics support,manufacturers in the traditional retail channel must decide whether to use the direct online channel.A retail supply chain model and a direct online supply chain model are built,in which manufacturers design products alone in the retail channel,while the platform and manufacturer complete the product design in the direct online channel.These two models are analyzed using the game theoretical model and numerical simulation.The findings indicate that if the manufacturers design capabilities are not very high and the commission rate is not very low,the manufacturers will choose the direct online channel if the platform s technical efforts are within an interval.When the platform s technical efforts are exogenous,they positively influence the manufacturers decisions;however,in the endogenous case,the platform s effect on the manufacturers is reflected in the interaction of the commission rate and cost efficiency.The manufacturers and the platform should make synthetic effort decisions based on the manufacturer s development capabilities,the intensity of market competition,and the cost efficiency of the platform.

Comparison on Commercial Application of Two Types of C_8 Aromatics Isomerization Catalysts

The results of commercial application of two types of C_8 aromatics isomerization catalysts under different feed conditions were compared to gain an insight in the techno-economical basis for selecting proper technological route at the plant.The comparison reveals differences in every aspect of feed consumption,unit capacity,product output,product distribution,and unit process parameters depending upon which catalyst type is adopted by the integrated PX complex.The type of aromatics isomerization catalyst has its influence on the plant scale,the construction cost,the process unit capacity and the product cost,with the magnitude of its impact varying with changing feed conditions.

Similarity Analysis-based Component Standardization for Product Family Design

During the product family design, it is necessary to reduce the variety of components and share common components among many products. The major benefits are lessened design efforts and reduced costs. Therefore, this paper presents an approach to standardize components of a product family. Form feature modeling for components is discussed. Based on the similarity analysis, a step by step method to standardize the feature architectures of components is described. The algorithms for standardization are identified as well. A case for standardizing components of an auto-body family is used to demonstrate the validity of this approach.