Numerous coal fires burn underneath the Datong coalfield because of indiscriminate mining.Landsat TM/ETM,unmanned aerial vehicle（UAV）,and infrared thermal imager were employed to monitor underground coal fires in th...Numerous coal fires burn underneath the Datong coalfield because of indiscriminate mining.Landsat TM/ETM,unmanned aerial vehicle（UAV）,and infrared thermal imager were employed to monitor underground coal fires in the Majiliang mining area.The thermal field distributions of this area in 2000,2002,2006,2007,and 2009 were obtained using Landsat TM/ETM.The changes in the distribution were then analyzed to approximate the locations of the coal fires.Through UAV imagery employed at a very high resolution（0.2 m）,the texture information,linear features,and brightness of the ground fissures in the coal fire area were determined.All these data were combined to build a knowledge model of determining fissures and were used to support underground coal fire detection.An infrared thermal imager was used to map the thermal field distribution of areas where coal fire is serious.Results were analyzed to identify the hot spot trend and the depth of the burning point.展开更多
Using the latest version of Mesoscale Modeling System （MMSv3）, we assimilated wind data from the scatterometer and built a model to assimilate the wind field over eastern China seas and adjacent waters and applied t...Using the latest version of Mesoscale Modeling System （MMSv3）, we assimilated wind data from the scatterometer and built a model to assimilate the wind field over eastern China seas and adjacent waters and applied the wave model WAVEWATCH-Ⅲ to test the sea area with assimilative wind and blended wind of QSCAT and NCEP as driving forces. High precision and resolution numerical wave results were obtained. Analysis indicated that if we replace the model wind result with the blended wind, better sea surface wind results and wave results could be obtained.展开更多
An online method using continuous flow isotope ratio mass spectrometry （CF-IRMS） interfaced with a Gasbench Ⅱ was presented to determine chlorine stable isotope composition. Silver chloride （AgCl） was quantitativ...An online method using continuous flow isotope ratio mass spectrometry （CF-IRMS） interfaced with a Gasbench Ⅱ was presented to determine chlorine stable isotope composition. Silver chloride （AgCl） was quantitatively derived from chloride by using silver nitrate （AgNO3）, and then was reacted with iodomethane （CH3Ⅰ） to produce methyl chloride （CH3Cl）. A GasBench Ⅱ equipped with a PoraPlot Q column was used to separate CH3Cl from any other gas species. Finally, chlorine stable isotope analysis was carried out on CH3Cl introduced to the IRMS in a helium stream via an active open split. The minimum amount of Cl used in this method is of the order of 1.4 μmol. Inter-laboratory and inter-technique comparisons show that the total uncertainty incorporating both the precision and accuracy of this method is better than 0.007%. Furthermore, ten seawaters sampled from different locations have a narrow δ37Cl value range from -0.008% to 0.010%, with a mean value of （0.000±0.006）%. This supports the assumption that any seawater can be representative of standard mean ocean chloride （SMOC） and used as an international reference material.展开更多
The design of a lead slowing down spectrometer is being developed at KAERI （Korea Atomic Energy Research Institute） for an analysis of isotopic fissile content in spent and recycled fuel. The lead spectrometer has a...The design of a lead slowing down spectrometer is being developed at KAERI （Korea Atomic Energy Research Institute） for an analysis of isotopic fissile content in spent and recycled fuel. The lead spectrometer has an advantage to assay fissile content directly from spent fuel. Accurate fissile material data must be fed back to the spent fuel design and management. For reutilization of PWR spent fuel, an isotopic fissile content analysis is required to obtain safety and economics in the fuel cycle. The LSDS （lead slowing down spectrometer） uses the different fission signatures of each fissile with respect to the interrogation neutron energy. Several simulations were done and parameter was obtained for the system working. Energy between 1 keV to 0.1 eV is very sensitive to isotopic fissile material fission with good energy resolution. An external source neutron is necessary to induce enough fissile fission. A neutron production methodology is being developed for cost effectiveness, easy maintenance and high neutron yield rate. The threshold fission detector screens the prompt fast fission neutrons from an intense radiation background. The detection of a fission signature has a direct relationship with the isotopic fissile content.展开更多
Using the results of aftershock relocation, inversion on seismic waves and InSAR results, and surface rupture displacements obtained by geological survey after the earthquake, this paper constructs a fault model of th...Using the results of aftershock relocation, inversion on seismic waves and InSAR results, and surface rupture displacements obtained by geological survey after the earthquake, this paper constructs a fault model of the Yushu Ms7. 1 earthquake. Based on rectangular dislocation theory in an elastic-viscoelastic layered medium, we have simulated the co- seismic deformation and gravity change with gravitational effect considered. The pictures show that the absolute gravity measuring point is beside the extremum of coseismic gravity change, and the numerical value reaches 25.02 x 10-Sm. s-2. After a discussion about the gravity changes before the earthquake and the coherence consistency between two FG-5 absolute gravimeters, we think that the measured value 27.2 × 10^-8 m· s^-2 at Yushu station is coseismic gravity change. It＇s coincident with the simulation results based on dislocation theory. Therefore it is a good tool to test the near-field changes found by dislocation theory.展开更多
This paper presents an analysis of the electric power flows in a hot rolling mill plant using a power quality analyzer and developing simulation models with Matlab-Simulink. The model inputs have been taken from proce...This paper presents an analysis of the electric power flows in a hot rolling mill plant using a power quality analyzer and developing simulation models with Matlab-Simulink. The model inputs have been taken from process data by the process computer of the plant. Data from different rolling campaigns have been analysed. A STATCOM （static synchronous compensator） with a control strategy based on voltage oriented control with d-q coordinates is used as solution to improve the reactive compensation as well as to minimize the voltage fluctuations and sags effect. The overall electric model has been simulated with the STATCOM to check the improvement in the voltage stability and the consumption.展开更多
基金Project(201412016)supported by the Special Fund for Public Projects of National Administration of Surveying,Mapping and Geoinformation of ChinaProject(51174287)supported by the National Natural Science Foundation of China
文摘Numerous coal fires burn underneath the Datong coalfield because of indiscriminate mining.Landsat TM/ETM,unmanned aerial vehicle（UAV）,and infrared thermal imager were employed to monitor underground coal fires in the Majiliang mining area.The thermal field distributions of this area in 2000,2002,2006,2007,and 2009 were obtained using Landsat TM/ETM.The changes in the distribution were then analyzed to approximate the locations of the coal fires.Through UAV imagery employed at a very high resolution（0.2 m）,the texture information,linear features,and brightness of the ground fissures in the coal fire area were determined.All these data were combined to build a knowledge model of determining fissures and were used to support underground coal fire detection.An infrared thermal imager was used to map the thermal field distribution of areas where coal fire is serious.Results were analyzed to identify the hot spot trend and the depth of the burning point.
基金Supported by the High-Tech Research and Development Program of China (863 Program, No. 2001AA633070 2003AA604040)the National Natural Science Foundation of China (No. 40476015).
文摘Using the latest version of Mesoscale Modeling System （MMSv3）, we assimilated wind data from the scatterometer and built a model to assimilate the wind field over eastern China seas and adjacent waters and applied the wave model WAVEWATCH-Ⅲ to test the sea area with assimilative wind and blended wind of QSCAT and NCEP as driving forces. High precision and resolution numerical wave results were obtained. Analysis indicated that if we replace the model wind result with the blended wind, better sea surface wind results and wave results could be obtained.
基金Projects(40772156, 41072179) supported by the National Natural Science Foundation of China
文摘An online method using continuous flow isotope ratio mass spectrometry （CF-IRMS） interfaced with a Gasbench Ⅱ was presented to determine chlorine stable isotope composition. Silver chloride （AgCl） was quantitatively derived from chloride by using silver nitrate （AgNO3）, and then was reacted with iodomethane （CH3Ⅰ） to produce methyl chloride （CH3Cl）. A GasBench Ⅱ equipped with a PoraPlot Q column was used to separate CH3Cl from any other gas species. Finally, chlorine stable isotope analysis was carried out on CH3Cl introduced to the IRMS in a helium stream via an active open split. The minimum amount of Cl used in this method is of the order of 1.4 μmol. Inter-laboratory and inter-technique comparisons show that the total uncertainty incorporating both the precision and accuracy of this method is better than 0.007%. Furthermore, ten seawaters sampled from different locations have a narrow δ37Cl value range from -0.008% to 0.010%, with a mean value of （0.000±0.006）%. This supports the assumption that any seawater can be representative of standard mean ocean chloride （SMOC） and used as an international reference material.
文摘The design of a lead slowing down spectrometer is being developed at KAERI （Korea Atomic Energy Research Institute） for an analysis of isotopic fissile content in spent and recycled fuel. The lead spectrometer has an advantage to assay fissile content directly from spent fuel. Accurate fissile material data must be fed back to the spent fuel design and management. For reutilization of PWR spent fuel, an isotopic fissile content analysis is required to obtain safety and economics in the fuel cycle. The LSDS （lead slowing down spectrometer） uses the different fission signatures of each fissile with respect to the interrogation neutron energy. Several simulations were done and parameter was obtained for the system working. Energy between 1 keV to 0.1 eV is very sensitive to isotopic fissile material fission with good energy resolution. An external source neutron is necessary to induce enough fissile fission. A neutron production methodology is being developed for cost effectiveness, easy maintenance and high neutron yield rate. The threshold fission detector screens the prompt fast fission neutrons from an intense radiation background. The detection of a fission signature has a direct relationship with the isotopic fissile content.
基金funded by the National Natural Science Foundation of China(41104049)the Earthquake Situation Tracking,CEA(2012020207)Scientific Investigation of Yushu M S 7.1 Earthquake,CEA(2060302)
文摘Using the results of aftershock relocation, inversion on seismic waves and InSAR results, and surface rupture displacements obtained by geological survey after the earthquake, this paper constructs a fault model of the Yushu Ms7. 1 earthquake. Based on rectangular dislocation theory in an elastic-viscoelastic layered medium, we have simulated the co- seismic deformation and gravity change with gravitational effect considered. The pictures show that the absolute gravity measuring point is beside the extremum of coseismic gravity change, and the numerical value reaches 25.02 x 10-Sm. s-2. After a discussion about the gravity changes before the earthquake and the coherence consistency between two FG-5 absolute gravimeters, we think that the measured value 27.2 × 10^-8 m· s^-2 at Yushu station is coseismic gravity change. It＇s coincident with the simulation results based on dislocation theory. Therefore it is a good tool to test the near-field changes found by dislocation theory.
文摘This paper presents an analysis of the electric power flows in a hot rolling mill plant using a power quality analyzer and developing simulation models with Matlab-Simulink. The model inputs have been taken from process data by the process computer of the plant. Data from different rolling campaigns have been analysed. A STATCOM （static synchronous compensator） with a control strategy based on voltage oriented control with d-q coordinates is used as solution to improve the reactive compensation as well as to minimize the voltage fluctuations and sags effect. The overall electric model has been simulated with the STATCOM to check the improvement in the voltage stability and the consumption.
