Testing methods of instrumental system in the marine magnetic survey have been studied in this paper, and the feasibility of each method has been testified by the observed data. The conclusion shows that the method br...Testing methods of instrumental system in the marine magnetic survey have been studied in this paper, and the feasibility of each method has been testified by the observed data. The conclusion shows that the method brought out can effectively eliminate the systematic error caused by the instrumental system, and greatly improve the surveying precision and the reliability of the survey results.展开更多
When measuring the surface subsidence of unstable areas such as railroad beds and large construction fields, it is not practical to always find stable positions to install measurement instruments. Yet installing those...When measuring the surface subsidence of unstable areas such as railroad beds and large construction fields, it is not practical to always find stable positions to install measurement instruments. Yet installing those instruments in unstable positions will cause measurement errors or even the complete failure of long-term subsidence surveillance. In this paper, the innovative concept and its method of "displacement-relay videometrics" are proposed. With the method, a double-headed camera is designed, and two constraints, the "fixation constraint" and the "homologous constraint", are established to construct the displacement-relay measurement equations, which can concurrently give the subsidence of the points to be measured and the positions where the cameras are fixed. The method and its measurement system are thus capable of automatically measuring the surface subsidence under the condition that the cameras are mounted on unstable locations over long durations. Therefore, the method has the broad prospect of undertaking automatic, long-term and continuous measurement for surface subsidence in engineering projects such as railroad beds, bridges and the ground beds of tall buildings. The proposed method opens a new area that cameras can be mounted on unstable platform to make high accuracy measurements, which is of great significance for applications.展开更多
Jet spreading width is one of the important characteristics of water jets discharging into the air.Many researchers have dealt with measuring this width,and contact measuring methods on the water jet surface were empl...Jet spreading width is one of the important characteristics of water jets discharging into the air.Many researchers have dealt with measuring this width,and contact measuring methods on the water jet surface were employed in a lot of the cases.In order to avoid undesirable effects caused by the contact on the jet surface,we introduce non-contact measuring methods with a laser instrument to the measurements of jet spreading width.In measurements,a transmitter emits sheet-like laser beam to a receiver.The water jet between the transmitter and the receiver interrupts the laser beam and makes a shadow.The minimum and maximum values of the shadow width are measured.In addition,pictures of the water jet are taken with a scale,and the shadow width is measured from the pictures.The experiments on various needle strokes were performed.Three kinds of width consistent with the jet structure were obtained.In the results,it can be concluded that our non-contact measuring methods are feasible.The data of jet spreading widths and jet taper were obtained and are useful for future applications.展开更多
文摘Testing methods of instrumental system in the marine magnetic survey have been studied in this paper, and the feasibility of each method has been testified by the observed data. The conclusion shows that the method brought out can effectively eliminate the systematic error caused by the instrumental system, and greatly improve the surveying precision and the reliability of the survey results.
基金supported by the National Natural Science Foundation of China(Grant Nos.11332012 and 11172323)
文摘When measuring the surface subsidence of unstable areas such as railroad beds and large construction fields, it is not practical to always find stable positions to install measurement instruments. Yet installing those instruments in unstable positions will cause measurement errors or even the complete failure of long-term subsidence surveillance. In this paper, the innovative concept and its method of "displacement-relay videometrics" are proposed. With the method, a double-headed camera is designed, and two constraints, the "fixation constraint" and the "homologous constraint", are established to construct the displacement-relay measurement equations, which can concurrently give the subsidence of the points to be measured and the positions where the cameras are fixed. The method and its measurement system are thus capable of automatically measuring the surface subsidence under the condition that the cameras are mounted on unstable locations over long durations. Therefore, the method has the broad prospect of undertaking automatic, long-term and continuous measurement for surface subsidence in engineering projects such as railroad beds, bridges and the ground beds of tall buildings. The proposed method opens a new area that cameras can be mounted on unstable platform to make high accuracy measurements, which is of great significance for applications.
文摘Jet spreading width is one of the important characteristics of water jets discharging into the air.Many researchers have dealt with measuring this width,and contact measuring methods on the water jet surface were employed in a lot of the cases.In order to avoid undesirable effects caused by the contact on the jet surface,we introduce non-contact measuring methods with a laser instrument to the measurements of jet spreading width.In measurements,a transmitter emits sheet-like laser beam to a receiver.The water jet between the transmitter and the receiver interrupts the laser beam and makes a shadow.The minimum and maximum values of the shadow width are measured.In addition,pictures of the water jet are taken with a scale,and the shadow width is measured from the pictures.The experiments on various needle strokes were performed.Three kinds of width consistent with the jet structure were obtained.In the results,it can be concluded that our non-contact measuring methods are feasible.The data of jet spreading widths and jet taper were obtained and are useful for future applications.
