Ventilation fans are one of the most important pieces of equipment in coal mines. Their performance plays an important role in the safety of staff and production. Given the actual requirements of coal mine production,...Ventilation fans are one of the most important pieces of equipment in coal mines. Their performance plays an important role in the safety of staff and production. Given the actual requirements of coal mine production,we instituted a research project on the measurement methods of key performance parameters such as wind pressure,amount of ventilation and power. At the end a virtual instrument for mine ventilation fans performance evaluation was developed using a USB interface. The practical performance and analytical results of our experiments show that it is feasible,reliable and effective to use the proposed instrumentation for mine ventilation performance evaluation.展开更多
This paper describes design and calibration procedures of a new small-scale testing apparatus for evaluating soil-structure interaction. Two distinct modes of loadings, such as, direct shear and pullout loadings on fl...This paper describes design and calibration procedures of a new small-scale testing apparatus for evaluating soil-structure interaction. Two distinct modes of loadings, such as, direct shear and pullout loadings on flexible and rigid reinforcements are implemented by the multiple functionalities of the apparatus through the use of single loading frame, dividing mechanism, instrumentation and data acquisition systems. The design is similar to the conventional apparatus; however, it includes some key modifications to adapt additional features of reinforcements. For the pullout test, the top half of the pullout box is fixed with the bottom half of the pullout box, while for the direct shear test, the top half is allowed to slide horizontally on low friction roller bearings connected to the driving mechanism. Mechanical loadings through a steel plate are used to apply the normal load in the pullout and direct shear apparatus. A series of shear and pullout tests are performed to validate the functionality of the apparatus and to examine relationships between the reinforcements and its shear and pullout resistances.展开更多
Luster is one of the main factors in assessing fabric appearance. There are many different ways to definite and describe the luster, which result in disorder and discommodious in evaluation. Based on previous work, an...Luster is one of the main factors in assessing fabric appearance. There are many different ways to definite and describe the luster, which result in disorder and discommodious in evaluation. Based on previous work, an apparatus suited for the measure of lustre is developed. Which performed measure the reflection distribution of fabrics automatically. Then the objective judgment can be given by the geniophotometric curve. Finally taking several kind of specimens for example give the results to prove the effectiveness of the device.展开更多
Wideband IMT-Advanced mobile communication systems tend to operate in the high frequency bands due to a relatively large capacity available. Thus, Measurement and modelling methods of radio propaga- tion eharaeteristi...Wideband IMT-Advanced mobile communication systems tend to operate in the high frequency bands due to a relatively large capacity available. Thus, Measurement and modelling methods of radio propaga- tion eharaeteristics are proposed for the field test of Chinese 4th generation （4G） trial system. The mea- surement system is established for 3.5GHz based on the sophistieated measurement instruments and the virtual instrument teehnology. The characteristic parameters of radio propagation sueh as path loss （PL） exponent and shadow fading standard deviation are extracted from measurement data, which result in the path loss model finally. The comparisons with other existing international models results validate our mea- surement in terms of path loss model. Based on the analysis of the existing extension model assumed for the microwave frequency at 3.5GHz, we find that the Stanford University Interim （SUI） model fits very well with the measurement result in the hotspot scenario, while the COST 231 model is closer to the mea- surement result in the suburban scenario. This result provides a measurement-based channel referenee for the development of the future IMT-Advanced systems in China.展开更多
Through experimental analysis of the liquid flows in a flow channel instrument, prompt evaluation of the physically defined viscosity of non-Newtonian liquid foods was investigated for development into a structurally ...Through experimental analysis of the liquid flows in a flow channel instrument, prompt evaluation of the physically defined viscosity of non-Newtonian liquid foods was investigated for development into a structurally simple and easy-to-use viscometer. For Newtonian and non-Newtonian test liquids, a relation between the friction coefficient and Reynolds number, which was dimensionless as derived from an expression of analysis as a gravity current, indicated a condition under which the flow in the instrument was laminar and under which an average shear rate was on the order of less than 1 s~. Prediction organized based on this empirical relation reproduced practically the flow curve determined for the liquid foods using a rotor type viscometer. Utilization of the channel instrument as a viscometer was formulated in terms of physical meanings of measurements such as the flow length and elapsed time.展开更多
An effective and simple way to develop equations from impact strain signals was proposed.Little research has been performed in this area,but this equation is very important for evaluating input signals in finite eleme...An effective and simple way to develop equations from impact strain signals was proposed.Little research has been performed in this area,but this equation is very important for evaluating input signals in finite element analysis impact tests and for obtaining additional information on material deformation and fracture processes under impact loading.For this purpose,dynamic impact responses were examined through signals obtained from a strain gauge installed on an impact striker connected to a data acquisition system.Aluminium 6061-T6 was used to extract strain responses on the striker during Charpy impact testing.Statistical analysis was performed using the I-kaz method,and curve fitting equations based on the equation for vibration response under a non-periodic force were used to evaluate the Charpy impact signals.The I-kaz coefficients and curve fitting equations were then compared and discussed with related parameters,such as velocities and thicknesses.Velocity and thickness were found to be related to the strain signal patterns,curve fitting equations and I-kaz coefficients.The equations developed using this method had R2 values greater than 97.7%.Finally,the constructed equations were determined to be suitable for evaluating Charpy impact strain signal patterns and obtaining additional information on fracture processes under impact loading.展开更多
AR （augmented reality） is a technology that adds information to the real world adding virtual elements to its visualization in real time. AR used in AECO （architectural, engineering, construction and operations） c...AR （augmented reality） is a technology that adds information to the real world adding virtual elements to its visualization in real time. AR used in AECO （architectural, engineering, construction and operations） can contribute in augmenting visualization during design, construction and operation of the buildings. This article presents a study that applies AR to building assessment with BIM （building information） model visualization. The use of AR on existing applications for smart phones and tablets is validated. AR proposed an adaptation of the method of POE （post-occupancy evaluation） subsidized. Traditional POE process model involves three phases： planning, conducting and applying. In order to incorporate AR, it is proposed a total restructuring of the planning phase, developing the research instruments in three steps： 3D modeling, model treatment and AR application development. It was observed that for POE studies, the 3D models are in large scale and need to be detailed for precise comparison. BIM models for facility management, representing building use situation, are of the highest level of detail. A balanced point between simplicity and representativeness was the solution adopted in this experiment for uploading and downloading performance issues. This article presents and discusses findings for the new proposition for the activity of research instruments development for the planning phase of POE with AR as well as initial tests with first results and difficulties faced.展开更多
基金Project 2007E237 supported by the Science Fund Program of Shaanxi Province of China
文摘Ventilation fans are one of the most important pieces of equipment in coal mines. Their performance plays an important role in the safety of staff and production. Given the actual requirements of coal mine production,we instituted a research project on the measurement methods of key performance parameters such as wind pressure,amount of ventilation and power. At the end a virtual instrument for mine ventilation fans performance evaluation was developed using a USB interface. The practical performance and analytical results of our experiments show that it is feasible,reliable and effective to use the proposed instrumentation for mine ventilation performance evaluation.
文摘This paper describes design and calibration procedures of a new small-scale testing apparatus for evaluating soil-structure interaction. Two distinct modes of loadings, such as, direct shear and pullout loadings on flexible and rigid reinforcements are implemented by the multiple functionalities of the apparatus through the use of single loading frame, dividing mechanism, instrumentation and data acquisition systems. The design is similar to the conventional apparatus; however, it includes some key modifications to adapt additional features of reinforcements. For the pullout test, the top half of the pullout box is fixed with the bottom half of the pullout box, while for the direct shear test, the top half is allowed to slide horizontally on low friction roller bearings connected to the driving mechanism. Mechanical loadings through a steel plate are used to apply the normal load in the pullout and direct shear apparatus. A series of shear and pullout tests are performed to validate the functionality of the apparatus and to examine relationships between the reinforcements and its shear and pullout resistances.
文摘Luster is one of the main factors in assessing fabric appearance. There are many different ways to definite and describe the luster, which result in disorder and discommodious in evaluation. Based on previous work, an apparatus suited for the measure of lustre is developed. Which performed measure the reflection distribution of fabrics automatically. Then the objective judgment can be given by the geniophotometric curve. Finally taking several kind of specimens for example give the results to prove the effectiveness of the device.
基金supported by the High Technology Research and Development Programme of China(2007AA01Z278)
文摘Wideband IMT-Advanced mobile communication systems tend to operate in the high frequency bands due to a relatively large capacity available. Thus, Measurement and modelling methods of radio propaga- tion eharaeteristics are proposed for the field test of Chinese 4th generation （4G） trial system. The mea- surement system is established for 3.5GHz based on the sophistieated measurement instruments and the virtual instrument teehnology. The characteristic parameters of radio propagation sueh as path loss （PL） exponent and shadow fading standard deviation are extracted from measurement data, which result in the path loss model finally. The comparisons with other existing international models results validate our mea- surement in terms of path loss model. Based on the analysis of the existing extension model assumed for the microwave frequency at 3.5GHz, we find that the Stanford University Interim （SUI） model fits very well with the measurement result in the hotspot scenario, while the COST 231 model is closer to the mea- surement result in the suburban scenario. This result provides a measurement-based channel referenee for the development of the future IMT-Advanced systems in China.
文摘Through experimental analysis of the liquid flows in a flow channel instrument, prompt evaluation of the physically defined viscosity of non-Newtonian liquid foods was investigated for development into a structurally simple and easy-to-use viscometer. For Newtonian and non-Newtonian test liquids, a relation between the friction coefficient and Reynolds number, which was dimensionless as derived from an expression of analysis as a gravity current, indicated a condition under which the flow in the instrument was laminar and under which an average shear rate was on the order of less than 1 s~. Prediction organized based on this empirical relation reproduced practically the flow curve determined for the liquid foods using a rotor type viscometer. Utilization of the channel instrument as a viscometer was formulated in terms of physical meanings of measurements such as the flow length and elapsed time.
基金Universiti Kebangsaan Malaysia grant UKM-KK-03-FRGS 0118-2010Universiti Teknikal Malaysia Melaka for supporting these research activities
文摘An effective and simple way to develop equations from impact strain signals was proposed.Little research has been performed in this area,but this equation is very important for evaluating input signals in finite element analysis impact tests and for obtaining additional information on material deformation and fracture processes under impact loading.For this purpose,dynamic impact responses were examined through signals obtained from a strain gauge installed on an impact striker connected to a data acquisition system.Aluminium 6061-T6 was used to extract strain responses on the striker during Charpy impact testing.Statistical analysis was performed using the I-kaz method,and curve fitting equations based on the equation for vibration response under a non-periodic force were used to evaluate the Charpy impact signals.The I-kaz coefficients and curve fitting equations were then compared and discussed with related parameters,such as velocities and thicknesses.Velocity and thickness were found to be related to the strain signal patterns,curve fitting equations and I-kaz coefficients.The equations developed using this method had R2 values greater than 97.7%.Finally,the constructed equations were determined to be suitable for evaluating Charpy impact strain signal patterns and obtaining additional information on fracture processes under impact loading.
文摘AR （augmented reality） is a technology that adds information to the real world adding virtual elements to its visualization in real time. AR used in AECO （architectural, engineering, construction and operations） can contribute in augmenting visualization during design, construction and operation of the buildings. This article presents a study that applies AR to building assessment with BIM （building information） model visualization. The use of AR on existing applications for smart phones and tablets is validated. AR proposed an adaptation of the method of POE （post-occupancy evaluation） subsidized. Traditional POE process model involves three phases： planning, conducting and applying. In order to incorporate AR, it is proposed a total restructuring of the planning phase, developing the research instruments in three steps： 3D modeling, model treatment and AR application development. It was observed that for POE studies, the 3D models are in large scale and need to be detailed for precise comparison. BIM models for facility management, representing building use situation, are of the highest level of detail. A balanced point between simplicity and representativeness was the solution adopted in this experiment for uploading and downloading performance issues. This article presents and discusses findings for the new proposition for the activity of research instruments development for the planning phase of POE with AR as well as initial tests with first results and difficulties faced.
