To handle the handover challenge in Express Train Access Networks(ETAN).mobility fading effects in high speed railway environments should be addressed first.Based on the investigation of fading effects in this paper,w...To handle the handover challenge in Express Train Access Networks(ETAN).mobility fading effects in high speed railway environments should be addressed first.Based on the investigation of fading effects in this paper,we obtain two theoretical bounds:HOTiming upper bound and HO-Margin lower bound,which are helpful guidelines to study the handover challenge today and in the future.Then,we apply them to analyze performance of conventional handover technologies and our proposal in ETAN.This follow-up theory analyses and simulation experiment results demonstrate that the proposed handover solution can minimize handover time up to 4ms(which is the fastest one so far),and reduce HO-Margin to 0.16 dB at a train speed of 350km/h.展开更多
Vehicle detectition in still images is a comparatively difficult task. This paper presents a method for this task by using boosted local pattern detector constructed from two local features including Haar-like and ori...Vehicle detectition in still images is a comparatively difficult task. This paper presents a method for this task by using boosted local pattern detector constructed from two local features including Haar-like and oriented gradient features. The whole process is composed of three stages. In the first stage, local appearance features of vehicles and non-vehicle objects are extracted. Haar-tike and oriented gradient features are extracted separately in this stage as local features. In the second stage, Adabeost algorithm is used to select the most discriminative features as weak detectors from the two local feature sets, and a strong local pattern detector is built by the weighted combination of these selected weak detectors. Finally, vehicle detection can be performed in still images by using the boosted strong local feature detector. Experiment results show that the local pattern detector constructed in this way combines the advantages of Haar-like and oriented gradient features, and can achieve better detection results than the detector by using single Haar-like features.展开更多
This study shows a novel three-dimensional （3D） parametric body model development using cross-section control and control algorithm retrieved from anthropometric survey. The 3D parametric body model was shaped into ...This study shows a novel three-dimensional （3D） parametric body model development using cross-section control and control algorithm retrieved from anthropometric survey. The 3D parametric body model was shaped into the most common body shape of the young Hong Kong female and be able to automatically change its critical body shape according to the user＇s critical body dimension inputs. The control algorithm controls the profile of the parametric model is retrieved from an anthropometric survey using 3D scanner to study the profile change of body and the relation between some critical body dimensions. Compared to the traditional anthropometric surveys, the 3D body scanner provides more accurate body dimension and information as well as new body shape measurements.展开更多
This paper describes a research project that uses embedded systems design principles to construct and simulate an Engine Control Unit （ECU） for a hybrid car. The ECU is designed to select a fuel type based on the st...This paper describes a research project that uses embedded systems design principles to construct and simulate an Engine Control Unit （ECU） for a hybrid car. The ECU is designed to select a fuel type based on the stress level of the simulated engine. The primary goal of the project was to use a robotics kit, connected to sensors, to simulate a hybrid car under certain stress conditions such as hill climbing or full throttle. The project uses the LEGO~ Mindstorms~ NXT robotics kit combined with a Java-based firmware, a pressure sensor to simulate a gas pedal, and a tilt sensor to determine when the car is traveling uphill or downhill. The objective was to develop, through simulation, a framework for adjusting the ratios/proportions of fuel types and mixture under the stress conditions. The expected result was to establish a basis for determining the ideal/optimal fuel-mix-stress ratios on the hybrid car＇s performance. Using the NXT robotics kit abstracted the low level details of the embedded system design, which allowed a focus on the high level design details of the research. Also, using the NXJ Java-based firmware allowed the incorporation of object oriented design principles into the project. The paper outlines the evolution and the compromises made in the choice of hardware and software components, and describes the computations and methodologies used in the project.展开更多
The goal of this paper describes kinematic viscosity and shear stress of two used engine oils, which have been taken from two different passenger cars. Kinematic viscosity and shear stress are two of the most importan...The goal of this paper describes kinematic viscosity and shear stress of two used engine oils, which have been taken from two different passenger cars. Kinematic viscosity and shear stress are two of the most important physical behaviours of fluids, especially lubricating fluids. In this paper the authors have focused on engine oil. Knowledge of these properties of engine oil is very important due to its lifetime. The experiments have been done using digital rotary rheometer Anton Paar DV-3 P with use of TR8 spindle and special adapter for a small amount of sample （20 mL）. Two different engine oils have been observed--first from passenger car Renault Scenic with petrol engine （engine capacity 1.6 dm3） and the second from passenger car Skoda Roomster with diesel engine （engine capacity 1.4 dm3）. Castrol Magnatec 10W-40 engine oil has been taken from Renault car and Shell Helix Ultra Extra 5W-30 engine oil has been taken from ~koda car. Service interval of change oil has been set to 15,000 km and samples of used engine oils have been taken after 1,500 km. Only first samples of used engine oils have been taken after raid of 20 km. All samples of used engine oils have been compared with new （unused） engine oils same specification. The measured values of kinematic viscosity and shear stress have been modeled using linear function. The coefficients of correlation R have been achieved high values （0.88-0.96）. The obtained models can be used to prediction of engine oil flow behaviour.展开更多
An automotive body is composed of compliant sheet metal parts.Fast and exactly diagnosing variation sources is very important when assembly variations happen.This paper proposes a diagnosis method of multi fixture var...An automotive body is composed of compliant sheet metal parts.Fast and exactly diagnosing variation sources is very important when assembly variations happen.This paper proposes a diagnosis method of multi fixture variations based on the variation model of compliant sheet metal assembly.The assembly variation model is obtained by using the method of influence coefficients(MIC) and considering the manufacturing variations of compliant parts and multi fixture variations.The measurement point variations induced by part manufacturing variations are firstly removed from the measurement data.The variation patterns of multi fixture variations are constructed by column vectors of fixture variation sensitivity matrix.This method is proved to be feasible for exactly diagnosing the fixture variations and has higher diagnosis efficiency than designated component analysis(DCA).展开更多
基金supported by the National Basic Research Program of China (973 Program)(No.2012CB315606 and 2010CB328201)
文摘To handle the handover challenge in Express Train Access Networks(ETAN).mobility fading effects in high speed railway environments should be addressed first.Based on the investigation of fading effects in this paper,we obtain two theoretical bounds:HOTiming upper bound and HO-Margin lower bound,which are helpful guidelines to study the handover challenge today and in the future.Then,we apply them to analyze performance of conventional handover technologies and our proposal in ETAN.This follow-up theory analyses and simulation experiment results demonstrate that the proposed handover solution can minimize handover time up to 4ms(which is the fastest one so far),and reduce HO-Margin to 0.16 dB at a train speed of 350km/h.
基金supported by the Korea Research Foundation Grant funded by the Korean Government(MOEHRD),the MKE(The Ministry of Knowledge Economy,Korea)the ITRC(Information Technology Research Center)support program(NIPA-2009-(C1090-0902-0007))
文摘Vehicle detectition in still images is a comparatively difficult task. This paper presents a method for this task by using boosted local pattern detector constructed from two local features including Haar-like and oriented gradient features. The whole process is composed of three stages. In the first stage, local appearance features of vehicles and non-vehicle objects are extracted. Haar-tike and oriented gradient features are extracted separately in this stage as local features. In the second stage, Adabeost algorithm is used to select the most discriminative features as weak detectors from the two local feature sets, and a strong local pattern detector is built by the weighted combination of these selected weak detectors. Finally, vehicle detection can be performed in still images by using the boosted strong local feature detector. Experiment results show that the local pattern detector constructed in this way combines the advantages of Haar-like and oriented gradient features, and can achieve better detection results than the detector by using single Haar-like features.
文摘This study shows a novel three-dimensional （3D） parametric body model development using cross-section control and control algorithm retrieved from anthropometric survey. The 3D parametric body model was shaped into the most common body shape of the young Hong Kong female and be able to automatically change its critical body shape according to the user＇s critical body dimension inputs. The control algorithm controls the profile of the parametric model is retrieved from an anthropometric survey using 3D scanner to study the profile change of body and the relation between some critical body dimensions. Compared to the traditional anthropometric surveys, the 3D body scanner provides more accurate body dimension and information as well as new body shape measurements.
文摘This paper describes a research project that uses embedded systems design principles to construct and simulate an Engine Control Unit （ECU） for a hybrid car. The ECU is designed to select a fuel type based on the stress level of the simulated engine. The primary goal of the project was to use a robotics kit, connected to sensors, to simulate a hybrid car under certain stress conditions such as hill climbing or full throttle. The project uses the LEGO~ Mindstorms~ NXT robotics kit combined with a Java-based firmware, a pressure sensor to simulate a gas pedal, and a tilt sensor to determine when the car is traveling uphill or downhill. The objective was to develop, through simulation, a framework for adjusting the ratios/proportions of fuel types and mixture under the stress conditions. The expected result was to establish a basis for determining the ideal/optimal fuel-mix-stress ratios on the hybrid car＇s performance. Using the NXT robotics kit abstracted the low level details of the embedded system design, which allowed a focus on the high level design details of the research. Also, using the NXJ Java-based firmware allowed the incorporation of object oriented design principles into the project. The paper outlines the evolution and the compromises made in the choice of hardware and software components, and describes the computations and methodologies used in the project.
文摘The goal of this paper describes kinematic viscosity and shear stress of two used engine oils, which have been taken from two different passenger cars. Kinematic viscosity and shear stress are two of the most important physical behaviours of fluids, especially lubricating fluids. In this paper the authors have focused on engine oil. Knowledge of these properties of engine oil is very important due to its lifetime. The experiments have been done using digital rotary rheometer Anton Paar DV-3 P with use of TR8 spindle and special adapter for a small amount of sample （20 mL）. Two different engine oils have been observed--first from passenger car Renault Scenic with petrol engine （engine capacity 1.6 dm3） and the second from passenger car Skoda Roomster with diesel engine （engine capacity 1.4 dm3）. Castrol Magnatec 10W-40 engine oil has been taken from Renault car and Shell Helix Ultra Extra 5W-30 engine oil has been taken from ~koda car. Service interval of change oil has been set to 15,000 km and samples of used engine oils have been taken after 1,500 km. Only first samples of used engine oils have been taken after raid of 20 km. All samples of used engine oils have been compared with new （unused） engine oils same specification. The measured values of kinematic viscosity and shear stress have been modeled using linear function. The coefficients of correlation R have been achieved high values （0.88-0.96）. The obtained models can be used to prediction of engine oil flow behaviour.
基金the National Natural Science Foundation of China (No. 50705056)the National High Technology Research and Development Program (863) of China (No.2006AA04Z148)
文摘An automotive body is composed of compliant sheet metal parts.Fast and exactly diagnosing variation sources is very important when assembly variations happen.This paper proposes a diagnosis method of multi fixture variations based on the variation model of compliant sheet metal assembly.The assembly variation model is obtained by using the method of influence coefficients(MIC) and considering the manufacturing variations of compliant parts and multi fixture variations.The measurement point variations induced by part manufacturing variations are firstly removed from the measurement data.The variation patterns of multi fixture variations are constructed by column vectors of fixture variation sensitivity matrix.This method is proved to be feasible for exactly diagnosing the fixture variations and has higher diagnosis efficiency than designated component analysis(DCA).
