A new method based on cross-spectrum estimation for the verification and validation of computer simulation models is expounded in accordance with the characteristics of missile systems. The new method can expose the d...A new method based on cross-spectrum estimation for the verification and validation of computer simulation models is expounded in accordance with the characteristics of missile systems. The new method can expose the differences between two time processes in several aspects and can also give quantitative analysis results about the statistical consistence between them. An application to an actual anti-tank missile system simulation is presented and the calculated results confirm the effectiveness of the method. The approach can also be employed to verify the simulation models of other dynamic systems.展开更多
Simulation has become an important method for missile flight research to reduce cost and improve accuracy. This paper concerns missile flight trajectory and attitude calculation. As a result, mechanical analysis and m...Simulation has become an important method for missile flight research to reduce cost and improve accuracy. This paper concerns missile flight trajectory and attitude calculation. As a result, mechanical analysis and modeling are done, the characteristics of missile flight decoding algorithm and attitude parameters are analyzed, the missile trajectory is dynamically simulated in a vertical plane and the missile attitude is real-time displayed. The description of missile flight process in a labo- ratory has provided a basis for actual missile flight.展开更多
The feasibility of providing the tank a limited anti helicopter ability with gun launched missile is studied. A type of simulation model of gun launched missile against attack helicopters is established. The simula...The feasibility of providing the tank a limited anti helicopter ability with gun launched missile is studied. A type of simulation model of gun launched missile against attack helicopters is established. The simulation and the parameter optimization of missile control system under various circumstances are done. The gun launched missile can directly hit the helicopters in the typical tracks, all the missdistances are less than 1?m and the maximum overload is less than available overload. Gun launched missile is a feasible choice for tanks against attack helicopters.展开更多
The constitutive modeling and springback simulation for AA2524 sheet in creep age forming（CAF） process were presented.A series of creep aging tests were performed on AA2524 at the temperature of 180-200 °C and ...The constitutive modeling and springback simulation for AA2524 sheet in creep age forming（CAF） process were presented.A series of creep aging tests were performed on AA2524 at the temperature of 180-200 °C and under the stress of 140-210 MPa for 16 h.Based on these experimental data,material constitutive equations which can well characterize creep aging behaviors of the tested alloy were developed.The effect of interior stress distributed along the sheet thickness on springback was simulated using FE software MSC.MARC by compiling the established constitutive models into the user subroutine.The simulation results showed that the amount of sheet springback was 61.12% when merely considering tensile stress existing along the sheet thickness;while sheet springback was up to 65.93% when taking both tensile and compressive stresses into account.In addition,an AA2524 rectangular sheet was subjected to CAF experiment in resistance furnace.The springback value of the formed rectangular sheet was 68.2%,which was much closer to 65.93%.This confirms that both tensile and compressive stresses across the sheet thickness should be considered in accurately predicting springback of the sheet after forming,which can be more consistent with experimental results.展开更多
文摘A new method based on cross-spectrum estimation for the verification and validation of computer simulation models is expounded in accordance with the characteristics of missile systems. The new method can expose the differences between two time processes in several aspects and can also give quantitative analysis results about the statistical consistence between them. An application to an actual anti-tank missile system simulation is presented and the calculated results confirm the effectiveness of the method. The approach can also be employed to verify the simulation models of other dynamic systems.
文摘Simulation has become an important method for missile flight research to reduce cost and improve accuracy. This paper concerns missile flight trajectory and attitude calculation. As a result, mechanical analysis and modeling are done, the characteristics of missile flight decoding algorithm and attitude parameters are analyzed, the missile trajectory is dynamically simulated in a vertical plane and the missile attitude is real-time displayed. The description of missile flight process in a labo- ratory has provided a basis for actual missile flight.
文摘The feasibility of providing the tank a limited anti helicopter ability with gun launched missile is studied. A type of simulation model of gun launched missile against attack helicopters is established. The simulation and the parameter optimization of missile control system under various circumstances are done. The gun launched missile can directly hit the helicopters in the typical tracks, all the missdistances are less than 1?m and the maximum overload is less than available overload. Gun launched missile is a feasible choice for tanks against attack helicopters.
基金Project(2014CB046602)supported by the National Basic Research Program of ChinaProject(20120162110003)supported by Ph D Programs Foundation of Ministry of Education of China
文摘The constitutive modeling and springback simulation for AA2524 sheet in creep age forming（CAF） process were presented.A series of creep aging tests were performed on AA2524 at the temperature of 180-200 °C and under the stress of 140-210 MPa for 16 h.Based on these experimental data,material constitutive equations which can well characterize creep aging behaviors of the tested alloy were developed.The effect of interior stress distributed along the sheet thickness on springback was simulated using FE software MSC.MARC by compiling the established constitutive models into the user subroutine.The simulation results showed that the amount of sheet springback was 61.12% when merely considering tensile stress existing along the sheet thickness;while sheet springback was up to 65.93% when taking both tensile and compressive stresses into account.In addition,an AA2524 rectangular sheet was subjected to CAF experiment in resistance furnace.The springback value of the formed rectangular sheet was 68.2%,which was much closer to 65.93%.This confirms that both tensile and compressive stresses across the sheet thickness should be considered in accurately predicting springback of the sheet after forming,which can be more consistent with experimental results.
