“互联网+”视域下语文线上教学的困境与路径探索

随着互联网和现代信息技术的快速发展,语文线上教学模式已成为当前教师常态化的教学形式。语文作为一门十分重要的基础文化课程,学好语文对提升学生的核心素养和综合素质有着关键的作用。本文针对当前“互联网+”背景下的语文线上教学存在的问题及优化建议展开研究。文章论述了“互联网+”视域下语文线上教学的概念和特征,分析了语文线上教学当前存在的问题,并针对问题提出优化语文线上教学的有效建议。

渝怀铁路彭水长隧道施工技术研究

文章针对渝怀铁路第四长大隧道———彭水隧道地质复杂、施工难度大等特点 ,从优化设计方案、不同地质条件下开挖方法、机械配套技术和不良地质施工技术四个方面进行了研究分析 ,取得了良好成效 。

轧钢加热炉的技术改造与节能途径探讨

结合轧钢加热炉历年来多炉次的节能技术改造实践,对炉型结构、炉体材料的选用、炉底水管的合理优化、低压重油雾化烧嘴的结构完善、空气预热及劣质重油降粘等节能技术途径进行了综合性的探讨分析。最后指出加热生产均衡有序进行是高效节能加热炉达标的重要制约因素;并提出高效节能加热炉的设计与技术改造,应灵活开发和运用各种成熟的新技术、新工艺、新材料;同时应以进一步提高加热炉热效率、降低消耗为明确目标。

Electrocatalytic Oxidation of Saccharides at MoOx/AuNPs Modified Electrode Towards Analytical Application

The MoOx/AuNPs composite film modified glassy carbon electrode was fabricated by electro-depositing simultaneously gold nanoparticles and molybdenum oxides using cyclic voltammetry. The morphology and topography of the MoOx/AuNPs composite were char-acterized by scan electron microscopy and X-ray photoelectron spectroscopy respectively, and the electrocatalytic oxidation of glucose at the MoOx/AuNPs composite film was inves-tigated and analyzed in detail. It was shown that the MoOx/AuNPs composite was of strong electrocatalytic activity towards oxidation of glucose as well as other saccharides, so that an attempt was made for direct voltammetric determination of glucose. Then the positive scan polarization reverse catalytic voltammetry was proposed for the first time. Based on this method, the pure oxidation current was extracted by subtraction of the blank current in the reverse scan. The current sensitivity was enhanced tremendously and the signal to noise ra-tio was improved adequately. The electrocatalytic oxidation of glucose at the MoOx/AuNPs modified electrode was performed in alkaline medium, a wide linear range from 0.01 mmol/L to 4.0 mmol/L of glucose, a higher current sensitivity of 2.35 mA/（mmol/L·cm2）, and a lower limit of detection of 9.01 μmol/L （at signal/noise=3） were achieved. In addition, the electrocatalytic oxidation of other saccharides such as lactose, fructose and sucrose was also evaluated.

浅谈铁路专用线轨道电路分路不良解决方案

介绍了铁路专用线设计中常见的轨道电路分路不良的问题,分析了引起轨道电路分路不良的主要原因,并总结目前常用的解决轨道电路分路不良的解决方案,简要叙述了这几种解决方案的工作原理、设备组成和适用范围,为运输化学试剂或原煤的铁路专用线轨道电路的设计及应用提供设计思路。

Electrochemical behavior of galena and jamesonite flotation in high alkaline pulp

In order to effectively separate galena and jamesonite and improve the recovery during the mixing flotation, the interaction mechanisms between the minerals and the collector of diethyl dithiocarbamate （DDTC） were investigated. Single mineral flotation test was organized to research the effect of pulp pH value on the flotation behavior of galena and jamesonite. Electrochemistry property of the interaction of these two minerals with DDTC was investigated by cyclic voltammetry and Tafel tests. Flotation test shows that the recovery of jamesonite in high alkaline pulp is strongly depressed by lime （Ca（OH）2）. The cyclic voltammetry and Tafel tests results show that the interaction between galena and DDTC is an electrochemical process. High pH value has little influence on the interaction between galena and DDTC, while it has great effect on jamesonite due to self-oxidation and specific adsorption of OH^- and CaOH^＋ on jamesonite surface. Non-electroactive hydroxyl compound and low-electroconductive calcium compounds cover the surface of jamesonite, which impedes electron transfer and DDTC adsorption, thus leads to very low floatability of jamesonite.

梯级泵站抽水装置性能优化研究

北京密云调蓄工程是匹配南水北调来水和地区用水不均衡而设置的大型调蓄工程,从团城湖经九级泵站加压调水至密云水库。工程沿线水工建筑物众多,实际调水过程复杂。面临不同要求的调水任务,梯级泵站组要在不同的工况下都能高效运转,所以对泵站系统的运行优化分析显得尤为重要。文章通过建立水力学仿真模型,对泵站进行优化分析,提出高效运行方案,研究成果对梯级泵站优化提供一定的指导作用和技术支撑。

Effects of polyaniline on electrochemical properties of composite inert anodes used in zinc electrowinning

In order to search for a suitable anode material used in zinc electrowinning in place of Pb-Ag alloy,Al/Pb-PANI（polyaniline）-WC（tungsten carbide） composite inert anodes were prepared on aluminum alloy substrate by double pulse electrodeposition（DPE） of PANI and WC particles with Pb2＋ from an original plating bath.Thereafter,anodic polarization curves,cyclic voltammetry curves and Tafel polarization curves for the composite inert anodes obtained under different PANI concentrations in the original plating bath were measured,and the microstructural features were also investigated by scanning electron microscopy（SEM）.The results show that Al/Pb-PANI-WC composite inert anode obtained under PANI concentration of 20 g/L in the original plating bath possesses uniform microstructures and composition distributions,higher electrocatalytic activity,better reversibility of electrode reaction and corrosion resistance in a synthetic zinc electrowinning electrolyte of 50 g/L Zn2＋,150 g/L H2SO4 at 35 °C.Compared with Pb-1%Ag alloy,the overpotential of oxygen evolutions for the composite inert anode are decreased by 185 mV and 166 mV,respectively,under 500 A/m2 and 1000 A/m2.

Nonlinear Current-Voltage Characteristics and Electroluminescence of cBN Crystal

The current-voltage（I-V） characteristics of cBN crystal sandwiched between two metallic electrodes are measured and found to be nonlinear. Over 20 samples are measured at room temperature with various electrodes, and the resulting curves are all similar in shape. When a voltage of about 560V is applied to the cBN crystal, the emitted light is visible to the naked eye in a dark room. We explain these phenomena by the space charge limited current and the electronic transition between the X and Г valleys of the conduction band.

Electrochemical behavior of tantalum in ethylene carbonate and aluminum chloride solvate ionic liquid

To investigate the electrochemical reduction mechanism of Ta(Ⅴ)in ethylene carbonate and aluminum chloride(EC-AlCl3)solvate ionic liquid,cyclic voltammetry experiments were conducted on a tungsten working electrode.Four reduction peaks were observed in the cyclic voltammogram of the EC-AlCl3-TaCl5 ionic liquid.The reduction peaks at-0.55,-0.72,and-1.12 V(vs Al)were related to the reduction of Ta(Ⅴ)to tantalum metal by three stages including the formation of Ta(Ⅳ)and Ta(Ⅲ)complex ions.The reduction of Ta(Ⅲ)to tantalum metal was an irreversible diffusion-controlled reaction with a diffusion coefficient of 3.7×10^-7 cm^2/s at 323 K,and the diffusion activation energy was 77 k J/mol.Moreover,the cathode products at 323 K were characterized by scanning electron microscopy,energy-dispersive spectroscopy,and X-ray photoelectron spectroscopy.The results showed that tantalum metal and tantalum oxides were obtained by potentiostatic electrodeposition at-0.8 V for 2 h.

Electrodeposition mechanism of Ni-Al composite coating

Ni-Al composite coatings were electrodeposited from a modified Watts solution. The electrochemical behavior of the coatings was studied by means of zeta potential analysis, voltammetry and electrochemical impedance spectroscopy（EIS）. It was found that the zeta potential of Al particles was-4 m V which is very close to that of Al2O3. Moreover, addition of conductive Al particles into the electrolyte shifted the polarization curve to more negative potentials and loop size of EIS curve increased. It was also demonstrated that the co-deposition behavior of Ni-Al composite coatings obeys the Guglielmi’s model. The results indicate that conductive Al particles behave as the inert particles and confirm the existence of a thin aluminum oxide layer on the surface of aluminum particles.

Layer by layer synthesis of Sn-Co-C microcomposites and their application in lithium ion batteries

Alloy anodes were studied for pursuing Sn-based microcomposite synthesis, assembly and performance for lithium ion batteries. The self-assembled Sn-Co-C composites with nano-scaled microstructures were prepared via solution method and carbothermal technology. The morphology and physical structure were investigated with scanning electron microscope (SEM) and X-ray diffraction (XRD). The as-prepared materials were assembled to half cell coin for the purpose of discussing the galvanostatic cycling, cyclic voltammetry and rate-capability performance. Results reveal that nanoscaled CoSn 2 alloys covered with Sn and C layer by layer are wrapped by cross-linked porous carbon network to form spherical microstructure. This distinguishing feature of Sn-Co-C composites provides a possible solution to the problems of Sn particle aggregation and poor electron transport, and has strong effect on improving electrochemical performance.

Preparation and photoelectric properties of Ho^(3+)-doped titanium dioxide nanowire downconversion photoanode

Ho^3＋-doped titanium dioxide（TiO2：Ho^3＋） downconversion（DC） nanowires were synthesized through a simple hydrothermal method followed by a subsequent calcination process after being immersed in Ho（NO3）3 aqueous solution. Moreover, TiO2：Ho^3＋ nanowires（HTNWs） were used as the photoanode in dye-sensitized solar cells（DSSCs） to investigate their photoelectric properties. Scanning electron microscopy（SEM） and X-ray diffraction（XRD） were used to characterize the morphology and structure of the material, respectively. The photofluorescence and ultraviolet-visible absorption spectra of HTNWs reveal a DC from the near and middle ultraviolet light to visible light which matches the strong absorbed region of the N719 dye. Compared with the pure TNW photoanode, HTNWs DC photoanodes show greater photovoltaic efficiency. The photovoltaic conversion efficiency（η） of the DSSCs with HTNWs photoanode doped with 4% Ho2O3（mass fraction） is two times that with pure TNW photoanode. This enhancement could be attributed to HTNWs which could extend the spectral response range of DSSCs to the near and middle ultraviolet region and increase the short-circuit current density（Jsc） of DSSCs, thus leading to the enhancement of photovoltaic conversion efficiency.

A direct electrochemical route from oxides to TiMn_2 hydrogen storage alloy

This study is for investigating the direct electro-deoxidation of mixed TiO2-Mn02 powder to prepare TiMn2 alloy in molten calcium chloride. The influences of process parameters, such as sintering temperature, cell voltage, and electrolysis time, on the electrolysis process were examined to investigate the mechanism of alloy formation. The composition and morphology of the products were analyzed by XRD and SEM, respectively. The electrochemical property of TiMn2 alloy was investigated by cyclic voltammetry measurements. The results show that pure TiMn2 can be prepared by direct electrochemical reduction of mixed TiO2/Mn02 pellets at a voltage of 3.1 V in molten calcium chloride of 900 ℃ for 7 h. The electro-deoxidation proceeds from the reduction of manganese oxides to Mn, which is reduced by Ti02 or CaTiOB to form TiMn2 alloy. The cyclic voltammetry measurements using pow- der microelectTode show that the prepared TiMn2 alloy has good electrochemical hydrogen storage property.

A Real-time Modeling of Photovoltaic Array

This paper mainly aims at the modeling problem of the photovoltaic (PV) array with a 30 kW PV grid-connected generation system. An iterative method for the time-varying parameters is proposed to model a plant of PV array. The relationship of PV cell and PV array is obtained and the solution for PV array model is unique. The PV grid-connected generation system is used to demonstrate the effectiveness of the proposed method by comparing the calculated values with the actual output of the system.

Effect of iron transformation on Acidithiobacillus ferrooxidans bio-leaching of clay vanadium residue

The acid bio-leaching process of vanadium extraction from clay vanadium water-leached residue was studied and the effect of the performance of iron transformation was investigated.Acidithiobacillus ferrooxidans affects the dissolution of vanadium through the catalytic effect on Fe^3+/Fe^2+couple and material exchange.The passivation of iron settling correlates with ferrous ion content in bio-leaching solution.In medium containing A.ferrooxidans and Fe(Ⅲ),the increment in Fe(Ⅱ)concentration leads to the formation of jarosite,generating a decline in vanadium extraction efficiency.Analysis of cyclic voltammetry shows that Fe(Ⅱ)ion is apt to be oxidized and translated into precipitate by A.ferrooxidans,which strongly adsorbed to the surface of the residue.Fe(Ⅲ)ion promotes the vanadium extraction due to its oxidizing activity.Admixing A.ferrooxidans to Fe(Ⅲ)medium elevates the reduction of low valence state vanadium and facilitates the exchange of substance between minerals and solution.This motivates 3.8%and 21.8%increments in recovery ratio and leaching rate of vanadium compared to the Fe(Ⅲ)exclusive use,respectively.Moreover,Fe(Ⅱ)ion impacts vanadium extraction slightly in sterile medium but negatively influences vanadium leaching in the presence of bacteria.

Physicochemical properties of DMI-LiNO_(3) solvated ionic liquid and its application in electrodeposition of neodymium at room temperature

The density,conductivity,and viscosity of the 1,3-dimethyl-2-imidazolinone and lithium nitrate(DMILiNO_(3))solvated ionic liquid were measured as a function of temperature.Additionally,the electrochemical mechanism and electrodeposition of neodymium from the DMI-LiNO_(3) solvated ionic liquid were investigated.Cyclic voltammetry results indicate that the electrochemical reduction of Nd(Ⅲ)is irreversible and proceeds via one-step with three-electron transfer,which is controlled by diffusion with a diffusion coefficient of 5.08×10^(-8) cm^(2)/s.Energydispersive X-ray spectrometry and X-ray photoelectron spectroscopy data confirm that the electrodeposit obtained after electrodeposition at-4 V(vs Ag)using the DMI-LiNO_(3)-Nd(CF_(3)SO_(3))_(3) solvated ionic liquid contains metallic neodymium.

Physicochemical properties of 1,3-dimethyl-2-imidazolinone−ZnCl_(2)solvated ionic liquid and its application in zinc electrodeposition

Zinc chloride(ZnCl_(2))was dissolved in the 1,3-dimethyl-2-imidazolinone(DMI)solvent,and the metallic zinc coatings were obtained by electrodeposition in room-temperature ambient air.The conductivity(σ),viscosity(η),and density(ρ)of the DMI−ZnCl_(2)solvated ionic liquid at various temperatures(T)were measured and fitted.Furthermore,cyclic voltammetry was used to study the electrochemical behavior of Zn(II)in the DMI−ZnCl_(2)solvated ionic liquid,indicating that the reduction of Zn(II)on the tungsten electrode was a one-step two-electron transfer irreversible process.XRD and SEM−EDS analysis of the cathode product confirmed that the deposited coating was metallic zinc.Finally,the effects of deposition potential,temperature and duration on the morphology of zinc coatings were investigated.The results showed that a dense and uniform zinc coating was obtained by potentiostatic electrodeposition at−2 V(vs Pt)and 353 K for 1 h.

Ordered mesoporous carbon supported bifunctional PtM(M=Ru,Fe,Mo)electrocatalysts for a fuel cell anode

The deposition onto an ordered mesoporous carbon（OMC）support of well dispersed PtM（M = Ru,Fe,Mo）alloy nanoparticles（NPs）were synthesized by a direct replication method using SBA-15 as the hard template,furfuryl alcohol and trimethylbeneze as the primary carbon sources,and metal acetylacetonate as the alloying metal precursor and secondary carbon source.The physicochemical properties of the PtM-OMC catalysts were characterized by N2 adsorption-desorption,X-ray diffraction,transmission electron microscopy,X-ray absorption near edge structure,and extended X-ray absorption fine structure.The alloy PtM NPs have an average size of 2-3 nm and were well dispersed in the pore channels of the OMC support.The second metal（M）in the PtM NPs was mostly in the reduced state,and formed a typical core（Pt）-shell（M）structure.Cyclic voltammetry measurements showed that these PtM-OMC electrodes had excellent electrocatalytic activities and tolerance to CO poisoning during the methanol oxidation reaction,which surpassed those of typical activated carbon-supported PtRu catalysts.In particular,the PtFe-OMC catalyst,which exhibited the best performance,can be a practical anodic electrocatalyst in direct methanol fuel cells due to its superior stability,excellent CO tolerance,and low production cost.