Developing agricultural circular economy is the important measures of relieving the pressure on agricultural resources, preserving the ecological environment and promoting the sustainable development of agriculture an...Developing agricultural circular economy is the important measures of relieving the pressure on agricultural resources, preserving the ecological environment and promoting the sustainable development of agriculture and rural economy. Based on the idea of circulation of agricultural research as the breakthrough point, the research firstly detailed the concept and scientific connotation of circular egdculture in an all-round way and described and analyzed the advantages and conditions of the development of circular agriculture in eastern and middle regions of China from three aspects including resources endowment, conditions of economic development and industrial base conditions. Furthermore, the research analyzed the model char- actedstics and summarized the successful ex^dence to provide a reference for promoting the models with consideration of Taihu Lake Basin in South of Jiangsu, Yi- meng mountain areas in Southeast of Shandong and hills and mountains region in northwest Henan. Finally, the reseach put forward the development orientation of agricultural circular economy and countermeasures and suggestions to further enhance the level of development.展开更多
The finite time thermodynamic performance of a generalized Carnot cycle, in which the heat transfer between the working fluid and the heat reservoirs obeys the generalized law Q∝( Δ T) m , is studied. The optimal ...The finite time thermodynamic performance of a generalized Carnot cycle, in which the heat transfer between the working fluid and the heat reservoirs obeys the generalized law Q∝( Δ T) m , is studied. The optimal configuration and the fundamental optimal relation between power and efficiency of the cycle are derived. Some special examples are discussed. The results can provide some theoretical guidance for the design a practical engine.展开更多
A new reliability-based multidisciplinary design optimization （RBMDO） framework is proposed by combining the single-loop-based reliability analysis （SLBRA） method with multidisciplinary feasible （MDF） method. Th...A new reliability-based multidisciplinary design optimization （RBMDO） framework is proposed by combining the single-loop-based reliability analysis （SLBRA） method with multidisciplinary feasible （MDF） method. The Kriging approximate model with updating is introduced to reduce the computational cost of MDF caused by the complex structure. The computational efficiency is remarkably improved as the lack of iterative process during reliability analysis. Special attention is paid to a turbine blade design optimization by adopting the proposed method. Results show that the method is much more efficient than the commonly used double-loop based RBMDO method. It is feasible and efficient to apply the method to the engineering design.展开更多
With a focus on an industrial multivariable system, two subsystems including the flow and the level outputs are analysed and controlled, which have applicability in both real and academic environments. In such a case,...With a focus on an industrial multivariable system, two subsystems including the flow and the level outputs are analysed and controlled, which have applicability in both real and academic environments. In such a case, at first, each subsystem is distinctively represented by its model, since the outcomes point out that the chosen models have the same behavior as corresponding ones. Then, the industrial multivariable system and its presentation are achieved in line with the integration of these subsystems, since the interaction between them can not actually be ignored. To analyze the interaction presented, the Gershgorin bands need to be acquired, where the results are used to modify the system parameters to appropriate values. Subsequently, in the view of modeling results, the control concept in two different techniques including sequential loop closing control(SLCC) scheme and diagonal dominance control(DDC) schemes is proposed to implement on the system through the Profibus network, as long as the OPC(OLE for process control) server is utilized to communicate between the control schemes presented and the multivariable system. The real test scenarios are carried out and the corresponding outcomes in their present forms are acquired. In the same way, the proposed control schemes results are compared with each other, where the real consequences verify the validity of them in the field of the presented industrial multivariable system control.展开更多
Method for constructing the optimal water supply line and formulas for calculating the targets for single-contaminant regeneration recycling water systems are improved to apply to the situation of variational pararnet...Method for constructing the optimal water supply line and formulas for calculating the targets for single-contaminant regeneration recycling water systems are improved to apply to the situation of variational pararneters in this article. Based on these extending methods, the effect of varying freshwater consumption and regenerated water flow rate on the optimizing results are investigated. The interactions of parameters of regeneration recycling systems are summarized. Finally, all the conclusions are illustrated from the results of mathematical programming through an example.展开更多
Taking the ratio of heat transfer area to net power and heat recovery efficiency into account, a multi-objective mathematical model was developed for organic Rankine cycle （ORC）. Working fluids considered were R123,...Taking the ratio of heat transfer area to net power and heat recovery efficiency into account, a multi-objective mathematical model was developed for organic Rankine cycle （ORC）. Working fluids considered were R123, R134a, R141b, R227ea and R245fa. Under the given conditions, the parameters including evaporating and condensing pressures, working fluid and cooling water velocities were optimized by simulated annealing algorithm. The results show that the optimal evaporating pressure increases with the heat source temperature increasing. Compared with other working fluids, R123 is the best choice for the temperature range of 100--180℃ and R141 b shows better performance when the temperature is higher than 180 ℃. Economic characteristic of system decreases rapidly with the decrease of heat source temperature. ORC system is uneconomical for the heat source temperature lower than 100℃.展开更多
Aiming at the problem of large AC copper loss caused by skin effects and proximity effects,and low efficiency at high speed of the hairpin-winding permanent magnet synchronous motor(PMSM)for electric vehicles(EVs),thi...Aiming at the problem of large AC copper loss caused by skin effects and proximity effects,and low efficiency at high speed of the hairpin-winding permanent magnet synchronous motor(PMSM)for electric vehicles(EVs),this paper firstly established the electromagnetic analytical model of the hairpin winding to calculate AC resistance.And the finite element model(FEM)of the hairpin-winding driving motor is established to calculate the AC characteristic of the hairpin winding at different speeds and temperatures.Then,combining modified particle swarm optimization(MPSO)and FEM,a 60 k W hairpin-winding PMSM is optimized under driving cycle conditions,and the electromagnetic performance and heat dissipation performance are compared with that of the traditional strand-winding motor.Finally,a prototype is made and an experimental platform is built to test the efficiency Map and temperature rise of the hairpin-winding motor over the whole speed range and verify the accuracy of the proposed optimization design method.The results show that the hairpin-winding PMSM not only has higher slot filling rate,high?efficiency range and power density,but also has better heat dissipation performance,which is suitable for application in the field of electric vehicles.展开更多
基金Supported by the National Natural Science Foundation of China(10971102)the Natural Science Foundation of Jiangsu Province of China(BK2009398)+1 种基金the Foundation for the Authors of the National Excellent Doctoral Thesis Award of China(200720)Jiangsu Innovation Fund for Doctor of Science(CX07B-027z)
基金Supported by National Nonprofit Institute Research Grant of CAAS(IARRP-2015-7)~~
文摘Developing agricultural circular economy is the important measures of relieving the pressure on agricultural resources, preserving the ecological environment and promoting the sustainable development of agriculture and rural economy. Based on the idea of circulation of agricultural research as the breakthrough point, the research firstly detailed the concept and scientific connotation of circular egdculture in an all-round way and described and analyzed the advantages and conditions of the development of circular agriculture in eastern and middle regions of China from three aspects including resources endowment, conditions of economic development and industrial base conditions. Furthermore, the research analyzed the model char- actedstics and summarized the successful ex^dence to provide a reference for promoting the models with consideration of Taihu Lake Basin in South of Jiangsu, Yi- meng mountain areas in Southeast of Shandong and hills and mountains region in northwest Henan. Finally, the reseach put forward the development orientation of agricultural circular economy and countermeasures and suggestions to further enhance the level of development.
文摘The finite time thermodynamic performance of a generalized Carnot cycle, in which the heat transfer between the working fluid and the heat reservoirs obeys the generalized law Q∝( Δ T) m , is studied. The optimal configuration and the fundamental optimal relation between power and efficiency of the cycle are derived. Some special examples are discussed. The results can provide some theoretical guidance for the design a practical engine.
基金Supported by the National High Technology Research and Development Program of China("863" Program) (2009AA04Z418, 2007AA04Z404)the National "111" Project(B07050)~~
文摘A new reliability-based multidisciplinary design optimization （RBMDO） framework is proposed by combining the single-loop-based reliability analysis （SLBRA） method with multidisciplinary feasible （MDF） method. The Kriging approximate model with updating is introduced to reduce the computational cost of MDF caused by the complex structure. The computational efficiency is remarkably improved as the lack of iterative process during reliability analysis. Special attention is paid to a turbine blade design optimization by adopting the proposed method. Results show that the method is much more efficient than the commonly used double-loop based RBMDO method. It is feasible and efficient to apply the method to the engineering design.
文摘With a focus on an industrial multivariable system, two subsystems including the flow and the level outputs are analysed and controlled, which have applicability in both real and academic environments. In such a case, at first, each subsystem is distinctively represented by its model, since the outcomes point out that the chosen models have the same behavior as corresponding ones. Then, the industrial multivariable system and its presentation are achieved in line with the integration of these subsystems, since the interaction between them can not actually be ignored. To analyze the interaction presented, the Gershgorin bands need to be acquired, where the results are used to modify the system parameters to appropriate values. Subsequently, in the view of modeling results, the control concept in two different techniques including sequential loop closing control(SLCC) scheme and diagonal dominance control(DDC) schemes is proposed to implement on the system through the Profibus network, as long as the OPC(OLE for process control) server is utilized to communicate between the control schemes presented and the multivariable system. The real test scenarios are carried out and the corresponding outcomes in their present forms are acquired. In the same way, the proposed control schemes results are compared with each other, where the real consequences verify the validity of them in the field of the presented industrial multivariable system control.
基金Supported by the National Natural Science Foundation of China （No.20436040）.
文摘Method for constructing the optimal water supply line and formulas for calculating the targets for single-contaminant regeneration recycling water systems are improved to apply to the situation of variational pararneters in this article. Based on these extending methods, the effect of varying freshwater consumption and regenerated water flow rate on the optimizing results are investigated. The interactions of parameters of regeneration recycling systems are summarized. Finally, all the conclusions are illustrated from the results of mathematical programming through an example.
基金Project(2009GK2009) supported by Science and Technology Department Funds of Hunan Province,ChinaProject(08C26224302178) supported by Innovation Fund for Technology Based Firms of China
文摘Taking the ratio of heat transfer area to net power and heat recovery efficiency into account, a multi-objective mathematical model was developed for organic Rankine cycle （ORC）. Working fluids considered were R123, R134a, R141b, R227ea and R245fa. Under the given conditions, the parameters including evaporating and condensing pressures, working fluid and cooling water velocities were optimized by simulated annealing algorithm. The results show that the optimal evaporating pressure increases with the heat source temperature increasing. Compared with other working fluids, R123 is the best choice for the temperature range of 100--180℃ and R141 b shows better performance when the temperature is higher than 180 ℃. Economic characteristic of system decreases rapidly with the decrease of heat source temperature. ORC system is uneconomical for the heat source temperature lower than 100℃.
基金supported by the Fundamental Research Funds for the Central Universities(No.2019YJS181)。
文摘Aiming at the problem of large AC copper loss caused by skin effects and proximity effects,and low efficiency at high speed of the hairpin-winding permanent magnet synchronous motor(PMSM)for electric vehicles(EVs),this paper firstly established the electromagnetic analytical model of the hairpin winding to calculate AC resistance.And the finite element model(FEM)of the hairpin-winding driving motor is established to calculate the AC characteristic of the hairpin winding at different speeds and temperatures.Then,combining modified particle swarm optimization(MPSO)and FEM,a 60 k W hairpin-winding PMSM is optimized under driving cycle conditions,and the electromagnetic performance and heat dissipation performance are compared with that of the traditional strand-winding motor.Finally,a prototype is made and an experimental platform is built to test the efficiency Map and temperature rise of the hairpin-winding motor over the whole speed range and verify the accuracy of the proposed optimization design method.The results show that the hairpin-winding PMSM not only has higher slot filling rate,high?efficiency range and power density,but also has better heat dissipation performance,which is suitable for application in the field of electric vehicles.
