论蜀派古琴的传人、传谱与传曲

蜀派古琴在中国古琴音乐中占有重要的地位。文章较为系统地论述了蜀派古琴具有代表性的琴人、琴谱和琴曲,为今人进一步保护和传承这一古老的音乐艺术提供了理论依据。

《醒世姻缘传》和《聊斋俚曲集》语法特点的差异

《醒世姻缘传》和《聊斋俚曲集》是明末清初两部重要的文学著作,后者为蒲松龄所作,前者作者 未定。本文比较两书若干语法特点的差异,指出两书作者不可能相同;同时也反映出明末清初山东方言不同 区域的一些语法现象。比较的方面主要有:宾语与补语的位置;助词“可”和“着”;代词“乜”;人称代词;“的”的 特殊用法。

百年来传奇戏曲史研究论略

传奇史作为戏曲专史,反映了传奇戏曲研究的时代成果。20世纪传奇史研究分为初建期、立体化时期和高潮期三个阶段。传奇史研究在史著观念和研究方法上都呈现逐步深入的趋势,但对传奇的价值和品格把握尚显不足,理论的整合也需进一步深入。

唱响故乡曲 最美故乡情——家乡民间歌曲走进校园

台州民间歌曲在中国浩瀚的民歌星空中是一颗熠熠发光的明星。随着社会经济的发展,怎样对台州的民间歌曲资源进行有效利用,进一步挖掘和补充、传承民间歌曲和保护民间歌曲是当务之急。作为教学一线的音乐教师,我认为对于民间歌曲的传承和保护不能靠一己之力,可以在学校实施一些行之有效的举措,本文就是我在学校教学中的一些尝试。

Study on Population Genetic Structure and Pathogenicity of Ustilaginoidea virens from Anhui Province

In order to determine population genetic structure and pathogenicity of Ustilaginoidea virens in the major rice-growing areas of Anhui Province, total 92 U. virens strains were collected from 28 rice-planting counties （cities） of Anhui Province. Their genetic diversity was analyzed by using REP-PCR （repetitive extragenic palindromic sequence PCR）, and pathogenicity was determined with artificial inoculation method. The results showed that U. virens in rice-growing regions of Anhui Province had a rich genetic diversity. At the similarity level of 0.76, the 92 U. virens strains could be classified into 7 groups. Significant differences were found in pathogenicity among the 24 U. virens strains belonging to different groups, which showed no association with territorial source of U. virens strain or cluster method adopted by this study. Strain pathogenicity and rice varieties showed significant specificity.

Molecularly imprinted polymer based on upconversion nanoparticles for highly selective and sensitive determination of Ochratoxin A

A novel molecularly imprinted polymer (MIP) based on upconversion nanoparticles (UCNPs) was successfully synthesized for determination of Ochratoxin A (OTA). The MIP was developed on the silica-coated UCNPs using N-(1-hydroxy-2-naphthoyl amido)-(L)-phenylalanine (HNA-Phe) as the alternative template. The final composite combined the advantages of the high selectivity of MIP with the high fluorescence intensity of UCNPs which was selective and sensitive to OTA. Under the optimal condition, the fluorescence intensity of UCNPs@SiO2@MIP decreases linearly when the concentration of OTA increases from 0.05 to 1.0 mg/L. The detection limit of OTA with the method was 0.031 mg/L. At three spiked concentration levels (50, 100 and 200 μg/kg), the recovery ranges of OTA in corn, rice and feed are 88.0%–91.6%, 80.2%–91.6% and 89.2%–90.4%, respectively.

Fluid flow and heat transfer characteristics of spiral coiled tube: Effects of Reynolds number and curvature ratio

Numerical analysis was performed to investigate flow and heat transfer characteristics in spiral coiled tube heat exchanger. Radius of curvature of the spiral coiled tube was gradually increased as total rotating angle reached 12n. As the varying radius of curvature became a dominant flow parameter, three-dimensional flow analysis was performed to this flow together with different Reynolds numbers while constant wall heat flux condition was set in thermal field. From the analysis, centrifugal force due to curvature effect is found to have significant role in behavior of pressure drop and heat transfer. The centrifugal force enhances pressure drop and heat transfer to have generally higher values in the spiral coiled tube than those in the straight tube. Even then, friction factor and Nusselt number are found to follow the proportionality with square root of the Dean number. Individual effect of flow parameters of Reynolds number and curvature ratio was investigated and effect of Reynolds number is found to be stronger than that of curvature effect.

Nonlinear Contact Between Inner Walls of Deep Sea Pipelines in Buckling Process

In order to study buckling propagation mechanism in deep sea pipelines, the contact between pipeline's inner walls in buckling process was studied. A two-dimensional ring model was used to represent the pipeline and a nonlinear spring model was adopted to simulate the contact between inner walls. Based on the elastoplastic constitutive relationship and the principle of virtual work theory, the coupling effect of pipeline's nonlinear large deformation and wall contact was included in the theoretical analysis with the aid of MATLAB, and the application scope of the theoretical model was also discussed. The calculated results show that during the loading process, the change in external pressure is closely related to the distribution of section stress, and once the walls are contacting each other, the external pressure increases and then remains stable after it reaches a specific value. Without fracture, the pipeline section will stop showing deformation. The results of theoretical calculations agree well with those of numerical simulations. Finally, in order to ensure reliability and accuracy of the theoretical results, the collapse pressure and propagation pressure were both verified by numerical simulations and experiments. Therefore, the theoretical model can be used to analyze pipeline's buckling deformation and contact between pipeline's inner walls, which forms the basis for further research on three-dimensional buckling propagation.

Preset model of bending force for 6-high reversing cold rolling mill based on genetic algorithm

The hydraulic roll-bending device was studied, which was widely used in modem cold rolling mills to regulate the strip flatness. The loaded roll gap crown mathematic model and the strip crown mathematic model of the reversing cold rolling process were established, and the deformation model of roll stack system of the 6-high 1 250 mm high crown （HC） reversing cold rolling mill was built by slit beam method. The simulation results show that, the quadratic component of strip crown decreases nearly linearly with the increase of the work roll bending force, when the shifting value of intermediate roll is determined by the rolling process. From the first pass to the fifth pass of reversing rolling process, the crown controllability of bending force is gradually weakened. Base on analyzing the relationship among the main factors associated with roll-bending force in reversing multi-pass rolling, such as strip width and rolling force, a preset mathematic model of bending force is developed by genetic algorithm. The simulation data demonstrate that the relative deviation of flatness criterions in each rolling pass is improved significantly and the mean relative deviation of all five passes is decreased from 25.1% to 1.7%. The model can keep good shape in multi-pass reversing cold rolling process with the high prediction accuracy and can be used to guide the production process.

Inheritance Pattern of Two-line Hybrid Rice Resistance to False Smut

[Objective] The aim of this study was to explore the inheritance pattern of the resistance of two-line hybrid rice to false smut. [Method] A moderate susceptible TGMS line 33S as the female parent, was crossed with 30 susceptible restorer lines and 23 resistant restorer lines. Then false smut resistance of the hybrid F1 and parents were identified. [Result] All F1 of 33S crossed with 30 susceptible re- storer lines were susceptible to rice false smut. The F1 of 33S crossed with 23 re- sistant restorer lines showed dominant, incompletely dominant or recessive inheri- tance. Dominant and incompletely dominant inheritance accounted for 87.0%. The diseased panicle rate, disease index, average diseased grains per panicle, and the highest diseased grains per panicle of F1 shared highly significant positive correla- tions with corresponding indicators of restorer lines. [Conclusion] This study provides references for genetic improvement of two-line hybrid rice.

Propagation of internal waves up continental slope and shelf

In a two-dimensional and linear framework, a transformation was developed to derive eigensolutions of internal waves over a subcritical hyperbolic slope and to approximate the continental slope and shelf. The transformation converts a hyperbolic slope in physical space into a flat bottom in transform space while the governing equations of internal waves remain hyperbolic. The eigensolutions are further used to study the evolution of linear internal waves as it propagates to subcritical continental slope and shelf. The stream function, velocity, and vertical shear of velocity induced by internal wave at the hyperbolic slope are analytically expressed by superposition of the obtained eigensolutions. The velocity and velocity shear increase as the internal wave propagates to a hyperbolic slope. They become very large especially when the slope of internal wave rays approaches the topographic slope, which is consistent with the previous studies.

Determination of photosynthetic parameters in two seawater-tolerant vegetables

It is difficult to determine the photosynthetic parameters of non-fiat leaves/green stems using photosynthetic instruments, due to the unusual morphology of both organs, especially for Suaeda salsa and Salicornia bigelovii as two seawater-tolerant vegetables. To solve the problem, we developed a simple, practical, and effective method to measure and calculate the photosynthetic parameters （such as PN, gs, E） based on unit fresh mass, instead of leaf area. The light/COftemperature response curves of the plants can also be measured by this method. This new method is more effective, stable, and reliable than conventional methods for plants with non-flat leaves. In addition, the relative notes on measurements and calculation of photosynthetic parameters were discussed in this paper. This method solves technical difficulties in photosynthetic parameter determination of the two seawater-tolerant vegetables and similar plants.

Hydraulic and thermal analysis of automatic transmission fluid in the presence of nano-particles and twisted tape:An experimental and numerical study

In the present study,hydraulic and thermal behavior of an automatic transmission nano-fluid(ATNF) inside a tube with a twisted tape has been investigated.The heat transfer improvement and pressure drop of transmission oil for each of case of using twisted tape and nano-particles were also examined separately and compared with each other.The Cu O nano-particles were used to prepare the ATNF.The effects of different Reynolds numbers and different mass fractions of nano-particle were investigated.The results showed that applying nano-particles and twisted tape simultaneously increases both the pressure drop and Nusselt number,on average by about 53% and 76%,respectively.By using a parameter,namely thermal performance index η,the effect of increasing heat transfer and pressure drop was studied simultaneously.The heat transfer improvement predominates the pressure drop increment in all cases.It was observed that the highest thermal performance of 1.9 was obtained at Re=634 and Φ=2%.Furthermore,regarding the increment of the Nu number,it was shown that the use of twisted tapes individually could increase the average Nu number by 41%,while the max increment arising from individual use of 2% nano-particles is 13%,so using twisted tape is a more effective-technique for this case study.

Effects of bending on heat transfer performance of axial micro-grooved heat pipe

Heat pipe is always bent in the typical application of electronic heat dissipation at high heat flux,which greatly affects its heat transfer performance. The capillary limit of heat transport in the bent micro-grooved heat pipes was analyzed in the vapor pressure drop,the liquid pressure drop and the interaction of the vapor with wick fluid. The bent heat pipes were fabricated and tested from the bending angle,the bending position and the bending radius. The results show that temperature difference and thermal resistance increase while the heat transfer capacity of the heat pipe decreases,with the increase of the bending angles and the bending position closer to the vapor section. However,the effects of bending radius can be ignored. The result agrees well with the predicted equations.

Theoretical Analysis and Experimental Evidence of Non-Fourier Heat Conduction Behavior

This paper consists of two parts. (1) For a hollow sphere with sudden temperature changes on its inner and outer surfaces, the hyperbolic heat conduction equation is employed to describe this extreme thermal case and an analytical expression of its temperature distribution is obtained. According to the expression, the non-Fourier heat conduction behavior that will appear in the hollow sphere is studied and some qualitative conditions that will result in distinct non-Fourier behavior in the medium is ultimately attained. (2) A novel experiment to observe non-Fourier heat conduction behavior in porous material (mainly ordinary duplicating paper) heated by a microsecond laser pulse is presented. The conditions for observing distinct non-Fourier heat conduction behavior in the experimental sample agree well with the theoretical results qualitatively.

Fuzzy Neural Network Model of 4-CBA Concentration for Industrial Purified Terephthalic Acid Oxidation Process

A fuzzy neural network (FNN) model is developed to predict the 4-CBA concentration of the oxidation unit in purified terephthalic acid process. Several technologies are used to deal with the process data before modeling.First,a set of preliminary input variables is selected according to prior knowledge and experience. Secondly,a method based on the maximum correlation coefficient is proposed to detect the dead time between the process variables and response variables. Finally, the fuzzy curve method is used to reduce the unimportant input variables.The simulation results based on industrial data show that the relative error range of the FNN model is narrower than that of the American Oil Company (AMOCO) model. Furthermore, the FNN model can predict the trend of the 4-CBA concentration more accurately.

Application of Modified G'/G-Expansion Method to Traveling Wave Solutions for Whitham-Broer-Kaup-Like Equations

A modified G′/G-expansion method is presented to derive traveling wave solutions for a class of nonlinear partial differential equations called Whitham -Broer- Kaup-Like equations. As a result, the hyperbolic function solutions, trigonometric function solutions, and rational solutions with parameters to the equations are obtained. When the parameters are taken as special values the solitary wave solutions can be obtained.

Conventional operation and laser therapy in the treatment of varicose veins

Objective:To evaluate the effectiveness of endovenous laser therapy and conventional thera- py on the varicose of great saphenous vein.Methods:Thirty-two patients received endovenous laser thera- py and 32 patients were operated by conventional therapy(high ligation and stripping).The observation results of great saphenous vein(GSV)were recorded by clinical evaluation and duplex ultrasound examina- tion.And the operating time,intraoperative blood loss,time to become moveable,duration of hospitaliza- tion and degree of feeling pain were compared between the two groups.Results:Compared with conven- tional therapy,laser therapy had good curative effect with less complications and no scars and no pains. There were significant differences between the two groups(P<0.01).Conclusion:Laser therapy for varicose of great saphenous vein is better than the conventional therapy.It deserves to be widely used in clinical treatment.

Novel shape detection systems based on FBG sensor net for intelligent endoscope

This dissertation aims at providing steady sensing for the shape detection of colonoscopes. The research especially deals with the key techniques of fiber bragg grating (FBG) large curvature sensor and sensor net, integrates the techniques of mechatronics and computer graphics, and develops real time FBG shape sensing system and incremental shape sensing system for colonoscopies.

Optical Conductivity of Impurity-Doped Parabolic Quantum Wells in an Applied Electric Field

The optical conductivity of impurity-doped parabolic quantum wells in anapplied electric field is investigated with the memory-function approach, and the analyticexpression for the optical conductivity is derived. With characteristic parameters pertaining toGaAs/Ga_(1-x)Al_xAs parabolic quantum wells, the numerical results are presented. It is shown that,the smaller the well width, the larger the peak intensity of the optical conductivity, and the moreasymmetric the shape of the optical conductivity; the optical conductivity is more sensitive to theelectric field, the electric Geld enhances the optical conductivity; when the dimension of thequantum well increases, the optical conductivity increases until it reaches a maximum value, andthen decreases.