To reduce vibration and noise and increase transmission efficiency, a three segment method for modifying the pinion profile was proposed. Cutter surface equations were deduced by changing the shape of the cutter-edge,...To reduce vibration and noise and increase transmission efficiency, a three segment method for modifying the pinion profile was proposed. Cutter surface equations were deduced by changing the shape of the cutter-edge, substituting three segment parabolas for the line. The influence of longitudinal tooth modifications on tooth surface load distributions was discussed. Transmission error minimization and uniformity of tooth surface load distribution were chosen as optimization goals and the modified parameters were obtained by applying the complex method. Finally, an experiment comparing the loaded transmission error, vibration, and noise both before and after modifications was carried out. The results indicate that the modified design is reliable.展开更多
NTP is nowadays the most widely used distributed network time protocol, which aims at synchronizing the clocks of computers in a network and keeping the accuracy and validation of the time information which is transmi...NTP is nowadays the most widely used distributed network time protocol, which aims at synchronizing the clocks of computers in a network and keeping the accuracy and validation of the time information which is transmitted in the network. Without automatic configuration mechanism, the stability and flexibility of the synchronization network built upon NTP protocol are not satisfying. P2P’s resource discovery mechanism is used to look for time sources in a synchronization network, and according to the network environment and node’s quality, the synchronization network is constructed dynamically.展开更多
Based on the concepts of objective fact and subjective desire proposed in this paper, the problems that exist in the nodal injections-based and transaction-based transmission service allocation scheme are pointed out....Based on the concepts of objective fact and subjective desire proposed in this paper, the problems that exist in the nodal injections-based and transaction-based transmission service allocation scheme are pointed out. To get around the problems above, a novel transmission service allocation scheme is proposed which considers the power flow distribution and the transaction impact on the system simultaneously so that the issues of “Cross-subsidies” and “Counter flow” can be avoided. The principle of the scheme is illustrated using two simple networks with 7 cases. The results show that the proposed scheme can satisfy the properties necessary for the development and growth of the electricity market.展开更多
The I-V characteristic of a superconductor is generally described by power-law,in which the superconductor with a high n transfers quickly from superconducting state to the normal conducting state.With a high transpor...The I-V characteristic of a superconductor is generally described by power-law,in which the superconductor with a high n transfers quickly from superconducting state to the normal conducting state.With a high transport current,in the low n value area,flux flow voltage becomes lower than in the high n value area,so that the transient characteristics strongly affect its stability.Based on those properties,we propose a new hybrid conductor which is made of low temperature superconductor(LTS) and high temperature superconductor(HTS) with concentric configuration in which the HTS coat is located outside of the LTS core.According to their power-law models,the modified adiabatic and dynamic stability criteria are qualitatively obtained by taking account into not only their critical currents but also n values.As a result,the new hybrid conductors have potential applications with higher engineering current density and improved stability.展开更多
基金Supported by the National Natural Science Foundation under Grant No. 50875211
文摘To reduce vibration and noise and increase transmission efficiency, a three segment method for modifying the pinion profile was proposed. Cutter surface equations were deduced by changing the shape of the cutter-edge, substituting three segment parabolas for the line. The influence of longitudinal tooth modifications on tooth surface load distributions was discussed. Transmission error minimization and uniformity of tooth surface load distribution were chosen as optimization goals and the modified parameters were obtained by applying the complex method. Finally, an experiment comparing the loaded transmission error, vibration, and noise both before and after modifications was carried out. The results indicate that the modified design is reliable.
文摘NTP is nowadays the most widely used distributed network time protocol, which aims at synchronizing the clocks of computers in a network and keeping the accuracy and validation of the time information which is transmitted in the network. Without automatic configuration mechanism, the stability and flexibility of the synchronization network built upon NTP protocol are not satisfying. P2P’s resource discovery mechanism is used to look for time sources in a synchronization network, and according to the network environment and node’s quality, the synchronization network is constructed dynamically.
文摘Based on the concepts of objective fact and subjective desire proposed in this paper, the problems that exist in the nodal injections-based and transaction-based transmission service allocation scheme are pointed out. To get around the problems above, a novel transmission service allocation scheme is proposed which considers the power flow distribution and the transaction impact on the system simultaneously so that the issues of “Cross-subsidies” and “Counter flow” can be avoided. The principle of the scheme is illustrated using two simple networks with 7 cases. The results show that the proposed scheme can satisfy the properties necessary for the development and growth of the electricity market.
基金supported in part by the National Natural Science Foundation of China (Grant No. 51077051)
文摘The I-V characteristic of a superconductor is generally described by power-law,in which the superconductor with a high n transfers quickly from superconducting state to the normal conducting state.With a high transport current,in the low n value area,flux flow voltage becomes lower than in the high n value area,so that the transient characteristics strongly affect its stability.Based on those properties,we propose a new hybrid conductor which is made of low temperature superconductor(LTS) and high temperature superconductor(HTS) with concentric configuration in which the HTS coat is located outside of the LTS core.According to their power-law models,the modified adiabatic and dynamic stability criteria are qualitatively obtained by taking account into not only their critical currents but also n values.As a result,the new hybrid conductors have potential applications with higher engineering current density and improved stability.
