To solve the problem that metal artifacts severely damage the clarity of the organization structure in computed tomography（CT） images, a sinogram fusion-based metal artifact correction method is proposed. First, the...To solve the problem that metal artifacts severely damage the clarity of the organization structure in computed tomography（CT） images, a sinogram fusion-based metal artifact correction method is proposed. First, the metal image is segmented from the original CT image by the pre-set threshold. The original CT image and metal image are forward projected into the original projection sinogram and metal projection sinogram, respectively. The interpolation-based correction method and mean filter are used to correct the original CT image and preserve the edge of the corrected CT image, respectively. The filtered CT image is forward projected into the filtered image sinogram. According to the position of the metal sinogram in the original sinogram and filtered image sinogram, the corresponding sinograms PM^D （ in the original sinogram） and PM^C （ in the filtered image sinogram）can be acquired from the original sinogram and filtered image sinogram, respectively. Then, PM^D and PM^C are fused into the fused metal sinogram PM^F according to a certain proportion.The final sinogram can be acquired by fusing PM^F , PM^D and the original sinogram P^O. Finally, the final sinogram is reconstructed into the corrected CT image and metal information is compensated into the corrected CT image.Experiments on clinical images demonstrate that the proposed method can effectively reduce metal artifacts. A comparison with classical metal artifacts correction methods shows that the proposed metal artifacts correction method performs better in metal artifacts suppression and tissue feature preservation.展开更多
Based on the Brinson constitutive model of SMA, a piecewise linear model for the hysteresis loop of pseudo-elasticity is proposed and applied in the analysis of responses of an SMA-spring-mass system under initial vel...Based on the Brinson constitutive model of SMA, a piecewise linear model for the hysteresis loop of pseudo-elasticity is proposed and applied in the analysis of responses of an SMA-spring-mass system under initial velocity activation. The histories of displacement and velocity of the mass, and the response of stress of SMA are calculated with Brinson’s model and the piecewise linear model. The difference of results of the two models is not significant. The calculation with piecewise-linear model needs no iteration and is highly efficient.展开更多
A new high throughput heat-treatment method with a continuous temperature gradient between 600 and 700 ？C was utilized on the Ti-5553 alloy（Ti-5 Al-5 Mo-5 V-3 Cr, mass fraction, %）. The temperature gradient was ind...A new high throughput heat-treatment method with a continuous temperature gradient between 600 and 700 ？C was utilized on the Ti-5553 alloy（Ti-5 Al-5 Mo-5 V-3 Cr, mass fraction, %）. The temperature gradient was induced by the variation of the axial section of sample, which was heated by the direct current. The variation of continuous cooling rates on the treated sample was realized by using the end quenching method. The microstructural evolution and mechanical properties under different heat treatment conditions were evaluated. The results show that the pseudo-spinodal decomposition of the alloy occurs at（617±1） ？C, and the size of the precipitated α phase is around 300 nm. Moreover, the highest microhardness is obtained after the heat treatment at the pseudo-spinodal decomposition temperature for 4 h. These indicate that the high throughput method is efficient and fast to determine the phase transformation temperature and corresponding microstructural evolution of alloys.展开更多
基金Open Research Fund of the Key Laboratory of Computer Netw ork and Information Integration of Ministry of Education of Southeast University(No.K93-9-2014-10C)the Scientific Research Foundation of Education Department of Anhui Province(No.KJ2014A186,SK2015A433)the National Basic Research Program of China(973 Program)(No.2010CB732503)
文摘To solve the problem that metal artifacts severely damage the clarity of the organization structure in computed tomography（CT） images, a sinogram fusion-based metal artifact correction method is proposed. First, the metal image is segmented from the original CT image by the pre-set threshold. The original CT image and metal image are forward projected into the original projection sinogram and metal projection sinogram, respectively. The interpolation-based correction method and mean filter are used to correct the original CT image and preserve the edge of the corrected CT image, respectively. The filtered CT image is forward projected into the filtered image sinogram. According to the position of the metal sinogram in the original sinogram and filtered image sinogram, the corresponding sinograms PM^D （ in the original sinogram） and PM^C （ in the filtered image sinogram）can be acquired from the original sinogram and filtered image sinogram, respectively. Then, PM^D and PM^C are fused into the fused metal sinogram PM^F according to a certain proportion.The final sinogram can be acquired by fusing PM^F , PM^D and the original sinogram P^O. Finally, the final sinogram is reconstructed into the corrected CT image and metal information is compensated into the corrected CT image.Experiments on clinical images demonstrate that the proposed method can effectively reduce metal artifacts. A comparison with classical metal artifacts correction methods shows that the proposed metal artifacts correction method performs better in metal artifacts suppression and tissue feature preservation.
基金National Natural Science Foundation ofChina(No.5 973 10 3 0 )
文摘Based on the Brinson constitutive model of SMA, a piecewise linear model for the hysteresis loop of pseudo-elasticity is proposed and applied in the analysis of responses of an SMA-spring-mass system under initial velocity activation. The histories of displacement and velocity of the mass, and the response of stress of SMA are calculated with Brinson’s model and the piecewise linear model. The difference of results of the two models is not significant. The calculation with piecewise-linear model needs no iteration and is highly efficient.
基金Project(2014CB644002)supported by the National Basic Research and Development Project of ChinaProject(2015CX004)supported by the Innovation-driven Plan in Central South University,China
文摘A new high throughput heat-treatment method with a continuous temperature gradient between 600 and 700 ？C was utilized on the Ti-5553 alloy（Ti-5 Al-5 Mo-5 V-3 Cr, mass fraction, %）. The temperature gradient was induced by the variation of the axial section of sample, which was heated by the direct current. The variation of continuous cooling rates on the treated sample was realized by using the end quenching method. The microstructural evolution and mechanical properties under different heat treatment conditions were evaluated. The results show that the pseudo-spinodal decomposition of the alloy occurs at（617±1） ？C, and the size of the precipitated α phase is around 300 nm. Moreover, the highest microhardness is obtained after the heat treatment at the pseudo-spinodal decomposition temperature for 4 h. These indicate that the high throughput method is efficient and fast to determine the phase transformation temperature and corresponding microstructural evolution of alloys.
