The initial copper with large grain sizes of 60-100 μm was processed by six passes asymmetrical accumulative rolling-bond （AARB） and annealing, the ultra-fine-grained （UFG） copper with grain size of 200 nm was ob...The initial copper with large grain sizes of 60-100 μm was processed by six passes asymmetrical accumulative rolling-bond （AARB） and annealing, the ultra-fine-grained （UFG） copper with grain size of 200 nm was obtained, and the microstructures and properties were studied. The results show that there are large sub-structures and also texture component C for the UFG copper obtained by six passes AARB, possessing high strength and microhardness in company with poor elongation and conductivity. Thereafter, the UFG copper was annealed at 220 °C for 35 min, in which the sub-structures disappear, the grain boundaries are composed of big angle grain boundaries, and the textures are composed of a variety of texture components and parts of twins. Compared with the UFG copper obtained by six passes AARB, the tensile strength and yield strength for the UFG copper obtained by six passes AARB and annealing at 220 °C for 35 min are decreased slightly, the elongation and conductivity are improved obviously.展开更多
This research adopted four methods to toughen epoxy adhesives. They were liquid hydroxyl group terminated polybutadiene (HTPB) rubber modification, silicon rubber modification, polyacrylate multiplicity elastomer par...This research adopted four methods to toughen epoxy adhesives. They were liquid hydroxyl group terminated polybutadiene (HTPB) rubber modification, silicon rubber modification, polyacrylate multiplicity elastomer particulates emulsion modification and chemical grafting modification. After modification, the shearing strength and the rupture elongation were tested. The interface and the chemical reaction between the modifiers and the epoxy were analyzed by scanning electron microscope (SEM) and infrared optical spectrum. The results show that the elastomer particulates modification and the chemical grafting modification can reach the better toughening effects.展开更多
Changnienia amoena Chien is a monotypic species and endemic to China, and was listed on the Chinese Red Book in 1992. The species was once abundant but has become rare and endangered in recent years because of the hab...Changnienia amoena Chien is a monotypic species and endemic to China, and was listed on the Chinese Red Book in 1992. The species was once abundant but has become rare and endangered in recent years because of the habitat fragmentation and unduly commercial collections. Previous observation showed that this species has very low and even no fruit set, and the pollinators are not observed before this report. The present observation was conducted at the Shennongjia, Hubei Province during the spring of 2002. The results showed that Bombus (Diversobombus) trifasciatus Smith, B. imitator Pittion and one species of Apis visited the flowers of the orchid, but only B. tritasciatus could carry pollinaria on its body and was the legitimate pollinators of C amoena. During 113 h of observation, only nine visitations were recorded. The bumblebees mainly appeared during 12:00-15:00 during the day. Bumblebees stayed in a flower only a few seconds and never more than ten seconds. The flowers would persist in fresh for about three weeks when they were not pollinated, but 3 or 4 d after pollinated, the pollinated flowers underwent a series of color and morphological changes including stalk elongation and ovary swelling. Therefore, stalk elongation can be considered an index of fruits set. Artificial pollination indicated that C amoena is a highly self-compatible and outcrossing species, but dependent on pollinators for fruit set. Based on the field observations, we concluded that pollination system of C amoena is deceptive. The fruit set in nature is not very low (26.98% on average) compared to other deceptive orchids, which may be related to small population sizes. The number of pollinia removal is much higher than that of fruit set, indicating that there are some degrees of pollinia wasting in C amoena.展开更多
A novel porous metal fiber sintered sheet （PMFSS） with a three-dimensional reticulated structure was fabricated by multi-tooth cutting and high-temperature solid-phase sintering process with copper fibers. A uniaxia...A novel porous metal fiber sintered sheet （PMFSS） with a three-dimensional reticulated structure was fabricated by multi-tooth cutting and high-temperature solid-phase sintering process with copper fibers. A uniaxial tensile test was conducted to investigate the effect of fiber length and natural aging factor on the tensile properties of the PMFSS. Results indicated that, under given stress, the increase of fiber length helped reinforce the tensile strength. The elongation of the PMFSS with medium length fiber of 15 mm exhibited the optimal performance, reaching about 13.5%. After natural aging treatment for a month, the tensile strength of PMFSS significantly decreased, but the change of elongation was negligible except for the one with the shortest fiber length of 5 mm, whose elongation was effectively improved. The morphological fracture features of PMFSSs were also characterized.展开更多
Seafloor elongated depressions are indicators of gas seepage or slope instability. Here we report a sequence of slopeparallel elongated depressions that link to headwalls of sediment slides on upper slope. The depress...Seafloor elongated depressions are indicators of gas seepage or slope instability. Here we report a sequence of slopeparallel elongated depressions that link to headwalls of sediment slides on upper slope. The depressions of about 250 m in width and several kilometers in length are areas of focused gas discharge indicated by bubble-release into the water column and methane enriched pore waters. Sparker seismic profiles running perpendicular and parallel to the coast, show gas migration pathways and trapped gas underneath these depressions with bright spots and seismic blanking. The data indicate that upward gas migration is the initial reason for fracturing sedimentary layers. In the top sediment where two young stages of landslides can be detected, the slopeparallel sediment weakening lengthens and deepens the surficial fractures, creating the elongated depressions in the seafloor supported by sediment erosion due to slope-parallel water currents.展开更多
Forward extrusion experiments of as-cast AZ31 magnesium alloy were conducted at different temperatures and different extrusion ratios using the as-cast billets with and without homogenizing treatment.The mechanical pr...Forward extrusion experiments of as-cast AZ31 magnesium alloy were conducted at different temperatures and different extrusion ratios using the as-cast billets with and without homogenizing treatment.The mechanical properties of pre-and post-extrusion of the two kinds of billets were investigated.Experimental results show that the mechanical properties of post-extrusion of the two kinds of billets all are obviously improved compared with those of pre-extrusion.The elongation of post-extrusion using the billet with homogenizing is higher than that without homogenizing,but the tensile strength is lower than that without homogenizing.When the extrusion ratio increases,the elongation and tensile strength of post-extrusion of two kinds of billets all will increase obviously.When the extrusion temperature of billet without homogenizing increases,the tensile strength of post-extrusion will decrease obviously and the elongation of post-extrusion will change to a small extent.For the billet with homogenizing,the tensile strength of post-extrusion will decrease in some sort when extrusion temperature increases.展开更多
The influence of the purity degree of the commercial aluminium on the mechanical properties： elastic stress, tensile strength, Brinell hardness, resilience and elongation at break was investigated. It was found that ...The influence of the purity degree of the commercial aluminium on the mechanical properties： elastic stress, tensile strength, Brinell hardness, resilience and elongation at break was investigated. It was found that the first three resistance characteristics decrease with the growth of the purity of the material chosen to the detriment of two ductility characteristics that rise to the three states considered： crude of casting noted： F, Annealed noted： O, hardened noted ： H1/4. Furthermore, it is important to note that the hardened and the annealed lead respectively to a considerable hardening and a considerable softening. This hardening and this softening of the material in question can be respectively associated with the increase in dislocation density and immigration impurity elements of dislocations.展开更多
In this paper, we generalize the extended tanh-function approach, which was used to find new exact travelling wave solutions of nonlinear partial differential equations or coupled nonlinear partial differential equati...In this paper, we generalize the extended tanh-function approach, which was used to find new exact travelling wave solutions of nonlinear partial differential equations or coupled nonlinear partial differential equations, to nonlinear differential-difference equations. As illustration, two series of exact travelling wave solutions of the discrete sine-Gordon equation are obtained by means of the extended tanh-function approach.展开更多
基金Project (50804018) supported by the National Natural Science Foundation of ChinaProject (ZDS2010015C) supported by Key Lab of Advanced Materials in Rare and Precious and Non-ferrous Metals, Ministry of Education, KMUST, ChinaProject (2010DH025) supported by Yunnan Province Construction Plans of Scientific and Technological Conditions, China
文摘The initial copper with large grain sizes of 60-100 μm was processed by six passes asymmetrical accumulative rolling-bond （AARB） and annealing, the ultra-fine-grained （UFG） copper with grain size of 200 nm was obtained, and the microstructures and properties were studied. The results show that there are large sub-structures and also texture component C for the UFG copper obtained by six passes AARB, possessing high strength and microhardness in company with poor elongation and conductivity. Thereafter, the UFG copper was annealed at 220 °C for 35 min, in which the sub-structures disappear, the grain boundaries are composed of big angle grain boundaries, and the textures are composed of a variety of texture components and parts of twins. Compared with the UFG copper obtained by six passes AARB, the tensile strength and yield strength for the UFG copper obtained by six passes AARB and annealing at 220 °C for 35 min are decreased slightly, the elongation and conductivity are improved obviously.
文摘This research adopted four methods to toughen epoxy adhesives. They were liquid hydroxyl group terminated polybutadiene (HTPB) rubber modification, silicon rubber modification, polyacrylate multiplicity elastomer particulates emulsion modification and chemical grafting modification. After modification, the shearing strength and the rupture elongation were tested. The interface and the chemical reaction between the modifiers and the epoxy were analyzed by scanning electron microscope (SEM) and infrared optical spectrum. The results show that the elastomer particulates modification and the chemical grafting modification can reach the better toughening effects.
文摘Changnienia amoena Chien is a monotypic species and endemic to China, and was listed on the Chinese Red Book in 1992. The species was once abundant but has become rare and endangered in recent years because of the habitat fragmentation and unduly commercial collections. Previous observation showed that this species has very low and even no fruit set, and the pollinators are not observed before this report. The present observation was conducted at the Shennongjia, Hubei Province during the spring of 2002. The results showed that Bombus (Diversobombus) trifasciatus Smith, B. imitator Pittion and one species of Apis visited the flowers of the orchid, but only B. tritasciatus could carry pollinaria on its body and was the legitimate pollinators of C amoena. During 113 h of observation, only nine visitations were recorded. The bumblebees mainly appeared during 12:00-15:00 during the day. Bumblebees stayed in a flower only a few seconds and never more than ten seconds. The flowers would persist in fresh for about three weeks when they were not pollinated, but 3 or 4 d after pollinated, the pollinated flowers underwent a series of color and morphological changes including stalk elongation and ovary swelling. Therefore, stalk elongation can be considered an index of fruits set. Artificial pollination indicated that C amoena is a highly self-compatible and outcrossing species, but dependent on pollinators for fruit set. Based on the field observations, we concluded that pollination system of C amoena is deceptive. The fruit set in nature is not very low (26.98% on average) compared to other deceptive orchids, which may be related to small population sizes. The number of pollinia removal is much higher than that of fruit set, indicating that there are some degrees of pollinia wasting in C amoena.
基金Projects(51475172,51275180,51375177) supported by the National Natural Science Foundation of ChinaProject(S2013040016899) supported by the Natural Science Foundation of Guangdong Province,ChinaProjects(2013ZM0003,2013ZZ017) supported by the Fundamental Research Funds for the Central Universities,South China University of Technology,China
文摘A novel porous metal fiber sintered sheet （PMFSS） with a three-dimensional reticulated structure was fabricated by multi-tooth cutting and high-temperature solid-phase sintering process with copper fibers. A uniaxial tensile test was conducted to investigate the effect of fiber length and natural aging factor on the tensile properties of the PMFSS. Results indicated that, under given stress, the increase of fiber length helped reinforce the tensile strength. The elongation of the PMFSS with medium length fiber of 15 mm exhibited the optimal performance, reaching about 13.5%. After natural aging treatment for a month, the tensile strength of PMFSS significantly decreased, but the change of elongation was negligible except for the one with the shortest fiber length of 5 mm, whose elongation was effectively improved. The morphological fracture features of PMFSSs were also characterized.
基金funded by the European project EUROFLEETS (Seventh Framework Programme, No. 228344)
文摘Seafloor elongated depressions are indicators of gas seepage or slope instability. Here we report a sequence of slopeparallel elongated depressions that link to headwalls of sediment slides on upper slope. The depressions of about 250 m in width and several kilometers in length are areas of focused gas discharge indicated by bubble-release into the water column and methane enriched pore waters. Sparker seismic profiles running perpendicular and parallel to the coast, show gas migration pathways and trapped gas underneath these depressions with bright spots and seismic blanking. The data indicate that upward gas migration is the initial reason for fracturing sedimentary layers. In the top sediment where two young stages of landslides can be detected, the slopeparallel sediment weakening lengthens and deepens the surficial fractures, creating the elongated depressions in the seafloor supported by sediment erosion due to slope-parallel water currents.
基金Projects(50605059,50735005)supported by the National Natural Science Foundation of ChinaProject(2009081012)supported by International Cooperation of Shanxi Province,ChinaProject(20090319ZX)supported by Program for the Top Young Academic Leaders of Higher Learning Institutions of Shanxi Province,China
文摘Forward extrusion experiments of as-cast AZ31 magnesium alloy were conducted at different temperatures and different extrusion ratios using the as-cast billets with and without homogenizing treatment.The mechanical properties of pre-and post-extrusion of the two kinds of billets were investigated.Experimental results show that the mechanical properties of post-extrusion of the two kinds of billets all are obviously improved compared with those of pre-extrusion.The elongation of post-extrusion using the billet with homogenizing is higher than that without homogenizing,but the tensile strength is lower than that without homogenizing.When the extrusion ratio increases,the elongation and tensile strength of post-extrusion of two kinds of billets all will increase obviously.When the extrusion temperature of billet without homogenizing increases,the tensile strength of post-extrusion will decrease obviously and the elongation of post-extrusion will change to a small extent.For the billet with homogenizing,the tensile strength of post-extrusion will decrease in some sort when extrusion temperature increases.
文摘The influence of the purity degree of the commercial aluminium on the mechanical properties： elastic stress, tensile strength, Brinell hardness, resilience and elongation at break was investigated. It was found that the first three resistance characteristics decrease with the growth of the purity of the material chosen to the detriment of two ductility characteristics that rise to the three states considered： crude of casting noted： F, Annealed noted： O, hardened noted ： H1/4. Furthermore, it is important to note that the hardened and the annealed lead respectively to a considerable hardening and a considerable softening. This hardening and this softening of the material in question can be respectively associated with the increase in dislocation density and immigration impurity elements of dislocations.
文摘In this paper, we generalize the extended tanh-function approach, which was used to find new exact travelling wave solutions of nonlinear partial differential equations or coupled nonlinear partial differential equations, to nonlinear differential-difference equations. As illustration, two series of exact travelling wave solutions of the discrete sine-Gordon equation are obtained by means of the extended tanh-function approach.
