期刊文献+
共找到13篇文章
< 1 >
每页显示 20 50 100
32头/位平行纺FDY的工厂设计及实践
1
作者 马英杰 《聚酯工业》 CAS 2014年第2期17-19,共3页
从熔体输送系统设计,纺丝系统设计,纺丝设备布置等方面,介绍了PET 32头/位平行纺FDY的设计和生产实践。采用32头平行纺丝,节省空间,有利于节能,单位产品能耗下降12.5%,生产效率提高33%。纺程中无转角,使得FDY丝物理指标均匀,染色性良好。
关键词 PET FDY 32头 位平行 工厂设计
下载PDF
平行位单孔胸腔镜肺叶切除术的初步探究
2
作者 林镇阳 徐松涛 +2 位作者 逄旭光 杜超翔 黄志良 《复旦学报(医学版)》 CAS CSCD 北大核心 2024年第6期977-980,996,共5页
目的总结平行位单孔胸腔镜肺叶切除术的临床经验。方法回顾性分析复旦大学附属中山医院厦门医院90例单孔胸腔镜肺叶切除术患者的临床资料。其中41例采用平行位单孔胸腔镜肺叶切除术,49例采用非平行位单孔胸腔镜肺叶切除术,比较两组患者... 目的总结平行位单孔胸腔镜肺叶切除术的临床经验。方法回顾性分析复旦大学附属中山医院厦门医院90例单孔胸腔镜肺叶切除术患者的临床资料。其中41例采用平行位单孔胸腔镜肺叶切除术,49例采用非平行位单孔胸腔镜肺叶切除术,比较两组患者围手术期的相关指标。结果平行位单孔胸腔镜组与非平行位单孔胸腔镜组在手术时间[(135.2±18.1)min vs.(132.7±25.6)min]、手术出血量[(100.1±27.2)mL vs.(117.3±33.5)mL]、引流管放置时间[(3.0±0.7)天vs.(3.1±0.9)天]、住院时间[(4.3±1.3)天vs.(4.8±1.5)天]及术后3年肿瘤复发率(7.32%vs.10.20%)差异均无统计学意义。结论平行位单孔胸腔镜肺叶切除术在技术上安全可行。 展开更多
关键词 单孔胸腔镜 肺叶切除术 平行
下载PDF
二维平行放位装车问题的布局约束启发式算法 被引量:5
3
作者 李冰 叶怀珍 《西南交通大学学报》 EI CSCD 北大核心 2002年第4期443-447,共5页
在分析二维平行放位货物装车问题的基础上 ,对货物装车问题设定了布局约束 ,构造了布局约束启发式算法。实验结果表明 ,此算法可以有效求得问题的优化解或近似优化解 。
关键词 布局约束启发式算法 二维平行 货物装车问题 优化解 NP-Complete问题 货物运输
下载PDF
“同源语素”和“同一语素”与复合多义词的平行义位和引申义位 被引量:1
4
作者 闫从发 《宁夏大学学报(人文社会科学版)》 CSSCI 2009年第6期80-83,共4页
一个单音多义词在降级为语素构造复合词的过程中,多个义位可能都参与构词,从而形成一组"同源语素",而那些在构词过程中意义唯一并且不会发生变化的语素则是一个个"同一语素"。复合多义词义位之间的关系与构成复合... 一个单音多义词在降级为语素构造复合词的过程中,多个义位可能都参与构词,从而形成一组"同源语素",而那些在构词过程中意义唯一并且不会发生变化的语素则是一个个"同一语素"。复合多义词义位之间的关系与构成复合多义词的语素在不同的义位上是"同源语素"还是"同一语素"有重大关联,它们造成了复合多义词的平行义位或引申义位。 展开更多
关键词 同源语素 同一语素 复合多义词 平行 引申义
下载PDF
FAULT LOCATION ESTIMATION FOR TWO-LINE FAULT INVOLVING DIFFERENT PHASES FROM EACH OF PARALLEL LINES 被引量:1
5
作者 张庆超 李铁 +1 位作者 张尧 宋文南 《Transactions of Tianjin University》 EI CAS 2001年第2期109-112,共4页
A novel numerical algorithm of fault location estimation for double line to ground fault involving different phases from each of two parallel lines is presented in this paper.It is based on the one terminal voltag... A novel numerical algorithm of fault location estimation for double line to ground fault involving different phases from each of two parallel lines is presented in this paper.It is based on the one terminal voltage and current data.The loop and nodal equations comparing faulted phase with non faulted phase of two parallel lines are introduced in the fault location estimation models,in which the source impedance of a remote end is not involved.The effects of load flow and fault resistance on the accuracy of fault location are effectively eliminated,therefore precise algorithms of locating fault are derived.The algorithm is demonstrated by digital computer simulations. 展开更多
关键词 fault location two parallel line line line fault
下载PDF
基于VC的水准网平差程序的设计与研究 被引量:4
6
作者 李巍 赵亮 张占伟 《测绘通报》 CSCD 北大核心 2013年第5期20-22,65,共4页
结合某地区三等水准测量外业所采集数据,利用VC程序对按照一定格式编排的TXT数据文件进行处理,得到各项误差,可实现数据采集、数据传输、数据处理与存储等全流程自动化的功能。
关键词 水准测量 正常水准面不平行改正 间接平差 精度评定
下载PDF
A UNIVERSAL ALGORITHM FOR PARALLEL CRC COMPUTATION AND ITS IMPLEMENTATION 被引量:5
7
作者 Xu Zhanqi Yi Kechu Liu Zengji 《Journal of Electronics(China)》 2006年第4期528-531,共4页
Derived from a proposed universal mathematical expression, this paper investigates a novel algo-rithm for parallel Cyclic Redundancy Check (CRC) computation, which is an iterative algorithm to update the check-bit seq... Derived from a proposed universal mathematical expression, this paper investigates a novel algo-rithm for parallel Cyclic Redundancy Check (CRC) computation, which is an iterative algorithm to update the check-bit sequence step by step and suits to various argument selections of CRC computation. The algorithm proposed is quite suitable for hardware implementation. The simulation implementation and performance analysis suggest that it could efficiently speed up the computation compared with the conventional ones. The algorithm is implemented in hardware at as high as 21Gbps, and its usefulness in high-speed CRC computa-tions is implied, such as Asynchronous Transfer Mode (ATM) networks and 10G Ethernet. 展开更多
关键词 Cyclic Redundancy Check (CRC) Parallel computation Multi-bit divider
下载PDF
A parallel memory architecture for video coding
8
作者 Jian-ying PENG Xiao-lang YAN +1 位作者 De-xian LI Li-zhong CHEN 《Journal of Zhejiang University-Science A(Applied Physics & Engineering)》 SCIE EI CAS CSCD 2008年第12期1644-1655,共12页
To efficiently exploit the performance of single instruction multiple data (SIMD) architectures for video coding, a parallel memory architecture with power-of-two memory modules is proposed. It employs two novel ske... To efficiently exploit the performance of single instruction multiple data (SIMD) architectures for video coding, a parallel memory architecture with power-of-two memory modules is proposed. It employs two novel skewing schemes to provide conflict-free access to adjacent elements (8-bit and 16-bit data types) or with power-of-two intervals in both horizontal and vertical directions, which were not possible in previous parallel memory architectures. Area consumptions and delay estimations are given respectively with 4, 8 and 16 memory modules. Under a 0.18-pm CMOS technology, the synthesis results show that the proposed system can achieve 230 MHz clock frequency with 16 memory modules at the cost of 19k gates when read and write latencies are 3 and 2 clock cycles, respectively. We implement the proposed parallel memory architecture on a video signal processor (VSP). The results show that VSP enhanced with the proposed architecture achieves 1.28× speedups for H.264 real-time decoding. 展开更多
关键词 Single instruction multiple data (SIMD) Video coding Parallel memory Skewing scheme
下载PDF
机构连杆点轨迹曲率研究及有关机构设计 被引量:2
9
作者 王允地 王帅 +1 位作者 王良文 张浩 《机械传动》 CSCD 北大核心 2017年第1期131-136,共6页
总结和完善了现有文献中的四杆机构连杆点轨迹曲率理论。叙述了另一套由绝对相对瞬心确定连杆点轨迹曲率中心的方法。阐述了由四杆机构尺寸确定连杆刚体拐点圆直径和方位的待定参数法及辅助垂线法。说明了确定连杆点轨迹曲率中心的新计... 总结和完善了现有文献中的四杆机构连杆点轨迹曲率理论。叙述了另一套由绝对相对瞬心确定连杆点轨迹曲率中心的方法。阐述了由四杆机构尺寸确定连杆刚体拐点圆直径和方位的待定参数法及辅助垂线法。说明了确定连杆点轨迹曲率中心的新计算通式和图解法。讨论了各文献均未涉及的两连架杆平行情况。绘出了一个实际机构的曲率平稳点曲线图。给出了两个实用的鹤式起重机构及两个实用的六杆停歇机构设计结果。 展开更多
关键词 连杆点轨迹曲率 待定参数法 辅助垂线法 鲍比利尔作法 连架杆平行 鹤式起重机构 六杆停歇机构
原文传递
孔令辉实战技术解析
10
作者 李惠芬 《乒乓世界》 1999年第8期21-23,共3页
正手抢冲半出台球参照孔令辉在比赛中的图片,当对方摆短稍长时,孔令辉利用正手侧身抢冲半出台球得分.首先让我们看一看孔令辉的站位,当孔令辉侧身时,双腿分开的距离比双肩大一些,左腿在前,右腿在后.为了抢冲半出台球,重心必须从后向前移... 正手抢冲半出台球参照孔令辉在比赛中的图片,当对方摆短稍长时,孔令辉利用正手侧身抢冲半出台球得分.首先让我们看一看孔令辉的站位,当孔令辉侧身时,双腿分开的距离比双肩大一些,左腿在前,右腿在后.为了抢冲半出台球,重心必须从后向前移动,如果站位平行,那么重心就容易向旁边移动,导致失误,或用不上力. 展开更多
关键词 孔令辉 技术解析 攻防转换 拉球 位平行 击球点 向旁边 向前移动 比赛中 回球速度
原文传递
An orientation method and analysis of optical radiation sources based on polyhedron and parallel incident light 被引量:1
11
作者 WANG Jiang 《Science China(Technological Sciences)》 SCIE EI CAS 2013年第2期475-483,共9页
The spatial orientation of optical radiation sources has long been the hot topic in the aerospace and the military applications.Current researches mainly focus on the high precision orientation on the partial field of... The spatial orientation of optical radiation sources has long been the hot topic in the aerospace and the military applications.Current researches mainly focus on the high precision orientation on the partial field of view.Thus,combination of several partial fields of view is required to achieve orientation when the field of view exceeds 180°,which results in the increase of size,weight,power consumption and the cost.By defining radiation energy and direction of the optical radiation source as a vector and applying the cosine law of radiation and vector theorem,it is shown that the vector can be obtained from unit normal vectors on the three un-coplanar surfaces and from the energy projected by the optical radiation source.Based on this,an orientation method with 360° full field of view by a polyhedron is suggested,the mathematical formula for anti-multipath interference is supposed and the error upper limit is derived.The feasibility and effectiveness of this method are validated by measurements and simulation.An accuracy better than 2.866° and 0.574° is achieved when the ratio of measurement error of energy on arbitrary surface and the true value are 5% and 1%,respectively,given the matrix composed of unit normal vectors on three measurement surfaces is orthogonal. 展开更多
关键词 optical radiation sources orientation radiation energy unit normal vector POLYHEDRON
原文传递
Effect of Pingan Fang, a Traditional Chinese Medicine compound, on behavioral sensitization and conditioned place preference induced by ethanol in mice 被引量:1
12
作者 Jia Lingyan Li Yibei +3 位作者 Hu Xiaoyu Lin Wu Wen Dachao Zhong Sen 《Journal of Traditional Chinese Medicine》 SCIE CAS CSCD 2016年第2期197-204,共8页
OBJECTIVE:To observe the effect of Pingan Fang(PG)on behavioral sensitization and conditioned place preference(CPP)induced by ethanol in mice,and to determine the intervention mechanism of PG on alcohol addiction.METH... OBJECTIVE:To observe the effect of Pingan Fang(PG)on behavioral sensitization and conditioned place preference(CPP)induced by ethanol in mice,and to determine the intervention mechanism of PG on alcohol addiction.METHODS:A behavioral sensitization mouse model induced by ethanol was established to observe the effect of PG on the development and expression of behavioral sensitization induced by ethanol by recording the spontaneous activity of mice.The resident time of mice in a white box was measured to evaluate the effect of PG on developing CPP induced by ethanol.Concentrations of dopamine(DA),Glutamate(Glu),and?-aminobutyric acid(GABA)in the corresponding mesolimbic region of mice were determined by enzyme-linked immunosorbent assay.RESULTS:Although PG did not alter spontaneous activity in mice,it reduced the growth of spontaneous activity stimulated by ethanol.The residence time in the white box after-ethanol-training of mice in CPP experiments was decreased.CONCLUSION:Our data suggested that PG blocked the development and expression of behavioral sensitization induced by ethanol and the development of CPP in mice.The mechanism might be related to the decreased content of DA and Glu and increased content of GABA in the mesolimbic dopamine system.This suggests that PG might be useful for the prevention and treatment of alcohol addiction. 展开更多
关键词 ETHANOL Pingan Fang Behavioral Sensi tization Conditioned place preference DOPAMINE Glutamic acid Aminobutyrates
原文传递
Superconvergence and recovery type a posteriori error estimation for hybrid stress finite element method 被引量:1
13
作者 BAI YanHong WU YongKe XIE XiaoPing 《Science China Mathematics》 SCIE CSCD 2016年第9期1835-1850,共16页
Superconvergence and recovery type a posteriori error estimators are analyzed for Pian and Sumihara's 4-node hybrid stress quadrilateral finite element method for linear elasticity problems. Superconvergence of or... Superconvergence and recovery type a posteriori error estimators are analyzed for Pian and Sumihara's 4-node hybrid stress quadrilateral finite element method for linear elasticity problems. Superconvergence of order O(h^(1+min){α,1}) is established for both the displacement approximation in H^1-norm and the stress approximation in L^2-norm under a mesh assumption, where α > 0 is a parameter characterizing the distortion of meshes from parallelograms to quadrilaterals. Recovery type approximations for the displacement gradients and the stress tensor are constructed, and a posteriori error estimators based on the recovered quantities are shown to be asymptotically exact. Numerical experiments confirm the theoretical results. 展开更多
关键词 linear elasticity hybrid stress finite element superconvergence recovery a posteriori error estimator
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部