The dispersion, stabilization and rheological properties of the slurry with various relative molecular masses of PVB were studied. The sintering properties, microstructure and dielectric properties of borosilicate gla...The dispersion, stabilization and rheological properties of the slurry with various relative molecular masses of PVB were studied. The sintering properties, microstructure and dielectric properties of borosilicate glass/Al203 composites were also investigated. The intensities of the typical vibrating bands decrease with the decrease of the relative molecular mass of PVB, which demonstrates that the content of butyral groups in PVB binders decreases correspondingly, leading to a rapid decrease in the viscosity of the mixed slurry. The solid content of samples increases with the decrease of the relative molecular mass of PVB, and this further leads to the increase of tape thickness, bulk density and dried-shrinkage coefficient of tapes. The bulk density, relative density, three-point strength and dielectric constant of sintered samples increase with the increase of the solid content, and the shrinkage and dielectric loss decrease. By contrast, samples for PVB-5s exhibit better properties of a bulk density of 3.10 g/cm3, a relative density of 98.1%, a three-point strength of 208 MPa, aεt value of 8.01, a tanδ value of 7.6× 10^-4 at 10 MHz and a well matching with Ag electrodes.展开更多
Low-carbon advanced nanostructured steels have been developed for various structural engineering applications, including bridges, automobiles, and other strength-critical applications such as the reactor pressure vess...Low-carbon advanced nanostructured steels have been developed for various structural engineering applications, including bridges, automobiles, and other strength-critical applications such as the reactor pressure vessels in nuclear power stations. The mechanical performances and applications of these steels are strongly dependent on their microstructural features. By controlling the size,number density, distribution, and types of precipitates, it is possible to produce nanostructured steels with a tensile strength reaching as high as 2 GPa while keeping a decent tensile elongation above 10% and a reduction of area as high as 40%. Besides, through a careful control of strength contributions from multiple strengthening mechanisms, the nanostructured steels with superior strengths and low-temperature impact toughness can be obtained by avoiding the temper embrittlement regime. With appropriate Mn additions, these nanostructured steels can achieve a triple enhancement in ductility(total tensile elongation, TE of ~30%) at no expense of strengths(yield strength, YS of ~1100 to 1300 MPa, ultimate tensile strength, UTS of ~1300 to 1400 MPa). More importantly, these steels demonstrate good fabricability and weldability. In this paper, the microstructure-property relationships of these advanced nanostructured steels are comprehensively reviewed. In addition, the current limitations and future development of these nanostructured steels are carefully discussed and outlined.展开更多
基金Project(2007AA03Z455) supported by the National High Technology Research and Development Program of ChinaProjects(BE2009168)supported by Science&Technology Pillar Program of Jiangsu Province, China+2 种基金Project supported by the Priority Academic Program Development (PAPD) of Jiangsu Higher Education Institutions, ChinaProject(CXZZ12_0415) supported by the Innovation Foundation for Graduate Students of Jiangsu Province, ChinaProject(IRT1146) supported for Changjiang Scholars and Innovative Research Teamin University (PCSIRT) of China
文摘The dispersion, stabilization and rheological properties of the slurry with various relative molecular masses of PVB were studied. The sintering properties, microstructure and dielectric properties of borosilicate glass/Al203 composites were also investigated. The intensities of the typical vibrating bands decrease with the decrease of the relative molecular mass of PVB, which demonstrates that the content of butyral groups in PVB binders decreases correspondingly, leading to a rapid decrease in the viscosity of the mixed slurry. The solid content of samples increases with the decrease of the relative molecular mass of PVB, and this further leads to the increase of tape thickness, bulk density and dried-shrinkage coefficient of tapes. The bulk density, relative density, three-point strength and dielectric constant of sintered samples increase with the increase of the solid content, and the shrinkage and dielectric loss decrease. By contrast, samples for PVB-5s exhibit better properties of a bulk density of 3.10 g/cm3, a relative density of 98.1%, a three-point strength of 208 MPa, aεt value of 8.01, a tanδ value of 7.6× 10^-4 at 10 MHz and a well matching with Ag electrodes.
基金supported by the National Natural Science Foundation of China (51801169)Hong Kong Research Grant Council (CityU Grant 9360161, 9042635, 9042879)the internal funding from the City University of Hong Kong (CityU 9380060)。
文摘Low-carbon advanced nanostructured steels have been developed for various structural engineering applications, including bridges, automobiles, and other strength-critical applications such as the reactor pressure vessels in nuclear power stations. The mechanical performances and applications of these steels are strongly dependent on their microstructural features. By controlling the size,number density, distribution, and types of precipitates, it is possible to produce nanostructured steels with a tensile strength reaching as high as 2 GPa while keeping a decent tensile elongation above 10% and a reduction of area as high as 40%. Besides, through a careful control of strength contributions from multiple strengthening mechanisms, the nanostructured steels with superior strengths and low-temperature impact toughness can be obtained by avoiding the temper embrittlement regime. With appropriate Mn additions, these nanostructured steels can achieve a triple enhancement in ductility(total tensile elongation, TE of ~30%) at no expense of strengths(yield strength, YS of ~1100 to 1300 MPa, ultimate tensile strength, UTS of ~1300 to 1400 MPa). More importantly, these steels demonstrate good fabricability and weldability. In this paper, the microstructure-property relationships of these advanced nanostructured steels are comprehensively reviewed. In addition, the current limitations and future development of these nanostructured steels are carefully discussed and outlined.
