A series of Al based alloys with low titanium contents (mass fraction) from 0.178% to 0.526% were directly produced in ordinary industrial electrolyzer. The electrolyzing results show that producing Al based alloys wi...A series of Al based alloys with low titanium contents (mass fraction) from 0.178% to 0.526% were directly produced in ordinary industrial electrolyzer. The electrolyzing results show that producing Al based alloys with titanium contents of less than 0.30% without great loss of electrolysis efficiency is possible. The quantitative analysis shows that this method has a great refining effect on transiting the coarse columnar grains in pure Al to equiaxed grains. The grain sizes decrease with the increase of titanium content and tend to a low limit at about 130 μm. During the solidification, the non equilibrium distribution of titanium leads to a great growth restricting effect and a constitutional under cooling zone in front of the growing liquid /solid interface.展开更多
文摘A series of Al based alloys with low titanium contents (mass fraction) from 0.178% to 0.526% were directly produced in ordinary industrial electrolyzer. The electrolyzing results show that producing Al based alloys with titanium contents of less than 0.30% without great loss of electrolysis efficiency is possible. The quantitative analysis shows that this method has a great refining effect on transiting the coarse columnar grains in pure Al to equiaxed grains. The grain sizes decrease with the increase of titanium content and tend to a low limit at about 130 μm. During the solidification, the non equilibrium distribution of titanium leads to a great growth restricting effect and a constitutional under cooling zone in front of the growing liquid /solid interface.
