基于ElGamal的新型分布式前向安全门限公钥体制

门限体制和前向安全体制是解决公钥加密体制和数字签名体制中密钥泄露问题的主要方法。将二者结合,必将极大提高系统密钥的安全性。利用HASH函数的单向性和分布式随机数产生算法,提出一种新型的分布式密钥产生、更新算法。应用于ElGamal公钥体制,提出同时具有门限性和前向安全性的新型分布式ElGamal公钥体制,并给出安全性证明。

Effect of wire diameter compression ratio on drawing deformation of micro copper wire

A crystal plasticity finite element model was developed for the drawing deformation of pure copper micro wire,based on rate-dependent crystal plasticity theory.The impact of wire diameter compression ratio on the micro-mechanical deformation behavior during the wire drawing process was investigated.Results indicate that the internal deformation and slip of the drawn wire are unevenly distributed,forming distinct slip and non-slip zones.Additionally,horizontal strain concentration bands develop within the drawn wire.As the wire diameter compression ratio increases,the strength of the slip systems and the extent of slip zones inside the deformation zone also increase.However,the fluctuating stress state,induced by contact pressure and frictional stress,results in a rough and uneven wire surface and diminishes the stability of the drawing process.

Construction of a pUC19-T Vector Based on Xcm Ⅰ

[Objective] The paper aimed to construct a new T vector based on plasmid pUC19 digested with Xcm Ⅰ. [Method] Two complementary oligonucleotide chains containing two Xcm Ⅰ sites were synthesized. After denaturation and renaturation,the adaptor was cloned into plasmid pUC19 between the Hind Ⅲ and BamH Ⅰ sites. The new plasmid,pUC19-HB-T vector,was digested with Xcm Ⅰ to derive a T-vector with 3′ end overhanging a T base. [Result] The constructed pUC19-HB-T vector was efficient in cloning PCR products,with an efficiency of 95% at least. [Conclusion] A new Xcm Ⅰ-based pUC19-HB-T vector was constructed,which could be applied to cloning of PCR products and other microbiology operations.

民族民间艺术正待全景重塑

近些年来,在沉寂中挣扎的中国民族民间文化,进入了一个令人期盼的时期:先是国家制定保护规划;紧接着是财政部600万先期资金的注入,随后是2000万元的投入;文化部根据专家深入排查和各省申报,初步掌握了各省的民族民间艺术的情况,并通过国务院制定了相关保护职责。

Construction and Identification of siRNA Expression Vector Targeting Nucleocapsid Protein N gene of PRRSV

[ Objective] The aim of this study was to investigate the construction and identification of siRNA expression vector targeting nucleocapsid protein N gone of PRRSV. [Method] Three siRNA oligonucleotides targeting nucleocapsid protein N gone sequence of PRRSV were designed or synthesized, and then inserted into CMV promoter downstream to clone into pSilencer 4,1 -CMV eukaryotic expression vector. The recombinant expression vector was identified by enzyme digestion and DNA sequencing. [ Result] The results showed that the siRNA interference recombinant plasmid vector pSilencer-N targeting nucleocapsid protein gone expression had been successfully constructed. [ Conclusion] This study lays a foundation for studies on the controlling PRRSV by RNA interference technique .

Predicting the Dielectric Strength of c-C_4F_8 and SF_6 Gas Mixtures by Monte Carlo Method

An improved Monte Carlo method was used to simulate the motion of electrons in c-C4F8 and SF6 gas mixtures for pulsed townsend discharge. The electron swarm parameters such as effective ionization coefficient, -↑α and drift velocity over the E/N range from 280～700 Td（1Td=10^-21 V·m^2） were calculated by employing a set of cross sections available in literature. From the variation cure of -↑α with SF6 partial pressure p, the limiting field （E/N）lim of gas mixture at different gas content was determined. It is found that the limiting field of c-C4F8 and SF6 gas mixture is higher than that of pure SF6 at any SF6 mixture ratio. Simulation results show excellent agreement with experiment data available in previous literature.

Gut bacteria alteration in obese people and its relationshipwith gene polymorphism

AIM:To investigate the differences in cultivable gut bacteria and peroxisome proliferator-activated receptor γ2(PPAR-γ2) gene Pro12Ala variation in obese and normal-weight Chinese people.METHODS:Using culture methods,the amounts of Escherichia coli,Enterococci,Bacteroides,Lactobacilli,Bif idobacteria and Clostridium perfringens(C.perfringens) in the feces of 52 obese participants [body mass index(BMI):≥ 28 kg/m2] and 52 participants of normalweight(BMI:18.5-24 kg/m2) were obtained.Study participants completed comprehensive questionnaires and underwent clinical laboratory tests.The polymerase chain reaction-restriction fragment length polymorphism(PCR-PFLP) assay was used to analyze PPAR-γ2 gene Pro12Ala variation.RESULTS:The obese group exhibited a lower amount of C.perfringens(6.54 ± 0.65 vs 6.94 ± 0.57,P = 0.001)and Bacteroides(9.81 ± 0.58 vs 10.06 ± 0.39,P = 0.012) than their normal-weight counterparts.No major differences were observed in Pro12Ala genotype distribution between the two groups;however,obese individuals with a Pro/Ala genotype had a signif icantly lower level of Bacteroides(9.45 ± 0.62 vs 9.93 ± 0.51,P = 0.027) than those with a Pro/Pro genotype.In addition,the obese group demonstrated a higher stool frequency(U = 975,P < 0.001) and a looser stool(U = 1062,P = 0.015) than the normal-weight group.CONCLUSION:Our results indicated interactions among cultivable gut flora,host genetic factors and obese phenotype and this might be helpful for obesity prevention.

Large-eddy Simulation of Bubble-Liquid Confined Jets

The Large-eddy simulation (LES) with two-way coupling is used to study bubble-liquid two-phase confined multiple jets discharged into a 2D channel.The LES results reveal the large-eddy vortex structures of both liquid flow and bubble motion,the shear-generated and bubble-induced liquid turbulence,and indicate much stronger bubble fluctuation than that of the liquid,the enhancement of liquid turbulence by bubbles.Both shear and bubble-liquid interaction are important for the liquid turbulence generation in the case studied.

Numerical Analysis of Finite Deformation of Overbroken Rock Mass in Gob Area Based on Euler Model of Control Volume

The overbroken rock mass of gob areas is made up of broken and accumulated rock blocks compressed to some extent by the overlying strata. The beating pressure of the gob can directly affect the safety of mining fields, formarion of road retained along the next goaf and seepage of water and methane through the gob. In this paper, the software RFPA＇2000 is used to construct numerical models. Especially the Euler method of control volume is proposed to solve the simulation difficulty arising from plastically finite deformations. The results show that three characteristic regions occurred in the gob area： （1） a naturally accumulated region, 0-10 m away from unbroken surrounding rock walls, where the beating pressure is nearly zero; （2） an overcompacted region, 10-20 m away from unbroken walls, where the beating pressure results in the maximum value of the gob area; （3） a stable compaction region, more than 20 m away from unbroken walls and occupying absolutely most of the gob area, where the beating pressures show basically no differences. Such a characteristic can exolain the easy-seeoaged “O”-ring phenomena around mining fields very well.

Structures and Dynamics of a Two-Dimensional Confined Dusty Plasma System

The influence of the confining potential strength and temperature on the structures and dynamics of a two-dimensional (2D) dusty plasma system is investigated through molecular dynamic (MD) simulation. The circular symmetric confining potential leads to the nonuniform packing of particles, that is, an inner core with a hexagon lattice surrounded by a few outer circular shells. Under the appropriate confining potential and temperature, the particle trajectories on middle shells form a series of concentric and nested hexagons due to tangential movements of particles.Mean square displacement, self-diffusion constant, pair correlation function, and the nearest bond are used to characterize the structural and dynamical properties of the system. With the increase of the confining potential, the radial and tangential movements of particles have different behaviors. With the increase of temperature, the radial and tangential motions strengthen, particle trajectories gradually become disordered, and the system gradually changes from a crystal or liquid state to a gas state.

Finite element simulation of influences of grain interaction on rolling textures of fcc metals

A rate dependent crystal plasticity constitutive model considering self and latent hardening in finite element analysis was developed to simulate rolling textures of pure aluminum. By changing the assignment of orientations to finite elements, i.e. assigning the same set of orientations to all elements or different orientations to different elements, the influences of grain interaction on the formation of rolling textures were numerically simulated with this kind of crystal plasticity finite element model. The simulation results reveal that the grains without considering grain interaction rotate faster than those considering grain interaction, and the rotation of grain boundary is slowed down due to the grain interaction. For a good simulation more elements should be assigned to one grain, in which the effects of both the boundary and interior parts of grain contribute to the formation of rolling textures.

In vitro and in vivo analyses of a genetically-restricted antigen specific factor from mixed cell cultures of macrophage, T and B lymphocytes

An immunostimulatory factor was identified to be secreted by antigen-pulsed maorophages. This factor was able to induce the generation of antigen specific T helper lymphocytes in vitro as well as in vivo. Further in vitro experiments testing for the genetic restriction of this factor indicated that it is a genetically-restricted antigen specific factor (ASF). The Cunningham plaque assay was used to quantify the generation of T helper lymphocytes by measuring the number of plaque forming cells after sequential incubations of antigen-pulsed maorophages with T lymphocytes, and then spleen cells, and finally the TNP-coated sheep red blood cells.

Formation mechanism and modulation of electromagnetically induced transparency-like transmission in side-coupled structures

Based on Fabry model and finite-different time-domain(FDTD) method, the plasmonic structure composed of a metal-insulator-metal(MIM) bus waveguide and a side-coupled resonator was investigated. It is found that the transmission features can be regulated by the cavity width and coupling distance. Electromagnetically induced transparency(EIT)-like transmission can be excited by adding an identical resonator on the pre-existing structure. Combining the foregoing theoretical analysis with coupled mode theory(CMT), the formation process of the EIT-like transmission was detailedly analyzed. EIT-like transmission can also be excited in plasmonic structure with two detuned resonators. By altering the structure parameters, the transparency window can be purposefully modulated. With the merits of compact structure and simplicity in fabrication, the proposed structures may have a broad prospect of applications in highly integrated optical circuits.

Rapid and Sensitive Identification of Horse and Donkey Meat in Iraqi Markets Using SSR and PCR-RFLP Based on Mitochondrial DNA Cytochrome B Gene

This study was carried out at the Genetic Engineering Lab, College of Agriculture, University of Basrah. DNA was extracted from samples containing meat of commercial products in the Basrah markets. The products subjected to analysis using polymerase chain reaction （PCR） with species specific repeat （SSR） and polymerase chain reaction-restriction fragment length polymorphism （PCR-RFLP） techniques based on the sequence of the mitochondrial DNA cytochrome b gene （mtDNA cyt b gene）. Then digestion with the Alu l restriction enzyme to establish a differential diagnosis detects and discriminates between meat species and adulteration in the products. SSR primers were applied, has been detected amplification of the encoded gene product, generated 221 bp in some imported minced and canned meat samples. The results show that SSR analysis produced a pattern that allowed a direct identification of horse and donkey meats in some imported minced and canned meat samples （Hana, Monde and Bavaria）. The amplified 359 bp gene of mtDNA cyt b gene from samples in different product was cut using Alu 1 restriction enzyme resulting in restriction fragment length polymorphism （RFLP）. Alu 1 was used to distinguish between the animals meat that belong to the family or one species. The digestion of the PCR product showed differences between products. Where the fragment length generated were 74, 76 and 189 bp. It belonged to horse meat. The fraud was detected in Hana, Monde and Bavaria products available in Basrah markets showing the presence of horse meat in these products that labeled as beef meats 100%. This revealed mtDNA cyt b gene as highly conserved and consequently a good molecular marker for diagnostic studies. Thus, this technique can be applied to food authentication for the identification of different species of animals in food products.

Heteroclinic and Homoclinic Connections between the Sun-Earth Triangular Points and Quasi-Satellite Orbits for Solar Observations

Investigation of new orbit geometries exhibits a very attractive behavior for a spacecraft to monitor space weather coming from the Sun. Several orbit transfer mechanisms are analyzed as potential alternatives to monitor solar activity such as a sub-solar orbit or quasi-satellite orbit and short and long heteroclinic and homoclinic connections between the triangular points L4 and L5 and the collinear point L3 of the CRTBP （circular restricted three-body problem） in the Sun-Earth system. These trajectories could serve as channels through where material can be transported from L5 to L3 by performing small maneuvers at the departure of the Trojan orbit. The size of these maneuvers at L5 is between 299 m/s and 730 m/s depending on the transfer time of the trajectory and does not need any deterministic maneuvers at L3. Our results suggest that material may also be transported from the Trojan orbits to quasi-satellite orbits or even displaced quasi-satellite orbits.

A DUAL RESERVATION CDMA-BASED MAC PROTOCOL WITH POWER CONTROL FOR AD HOC NETWORKS

This paper proposes a new multi-channel Medium Access Control (MAC) protocol named as Dual Reservation Code Division Multiple Access (CDMA) based MAC protocol with Power Control (DRCPC). The code channel is divided into common channel,broadcast channel and several data chan-nels. And dynamic power control mechanism is implemented to reduce near-far interference. Compared with IEEE 802.11 Distributed Coordination Function (DCF) protocol,the results show that the pro-posed mechanism improves the average throughput and limits the transmission delay efficiently.

Computational modeling of free-surface slurry flow problems using particle simulation method

The particle simulation method is used to solve free-surface slurry flow problems that may be encountered in several scientific and engineering fields.The main idea behind the use of the particle simulation method is to treat granular or other materials as an assembly of many particles.Compared with the continuum-mechanics-based numerical methods such as the finite element and finite volume methods,the movement of each particle is accurately described in the particle simulation method so that the free surface of a slurry flow problem can be automatically obtained.The major advantage of using the particle simulation method is that only a simple numerical algorithm is needed to solve the governing equation of a particle simulation system.For the purpose of illustrating how to use the particle simulation method to solve free-surface flow problems,three examples involving slurry flow on three different types of river beds have been considered.The related particle simulation results obtained from these three examples have demonstrated that:1) The particle simulation method is a promising and useful method for solving free-surface flow problems encountered in both the scientific and engineering fields;2) The shape and irregular roughness of a river bed can have a significant effect on the free surface morphologies of slurry flow when it passes through the river bed.

Analysis of bulked segregants to identify molecular markers linked with cocoon weight and cocoon shell weight in the silkworm Bombyx mori L

Two silkworm strains viz, B20 A (high cocoon shell ratio) and C.Nichi (low cocoon shell ratio) were sib mated for 10 generations to determine the homozygosis. Both bulked segregant analysis(BSA) and near isogenic lines (NIL) studies were done to identify the RFLP markers closely linked to cocoon shell parameters. Three hundred and fifty two random clones were identified as the low copy number sequence and used for identification of Restriction Fragment Length Polymorphic (RFLP) marker linked to cocoon weight and cocoon shell character. In the bulk segregant analysis, DNA from the parents (B20 A, C.Nichi), F 1 and F 2 progeny of high shell ratio (HSR) and low shell ratio (LSR) were screened for hybridization with the random clones. Polymorphic banding pattern achieved through southern hybridization with different probes indicated the probable correlation of polymorphism with high and low cocoon shell character which are possible landmarks in identifying the putative marker(s) for the cocoon shell character. Out of the 100 probes tried with parents, F 1, F 2 and their bulks, 10 probes were found to be closely linked to cocoon shell characters.

Molecular Characterization of Indian Species of Steinernema （Nematoda： Steinernematidae） Based on Restriction Fragment Length Polymorphism Profile of Internal Transcribed Spacer Region of Ribosomal DNA

Restriction fragment length polymorphism （RFLP） profiles of the amplified products of Internal Transcribed Spacer （ITS） region of rDNA using four restriction enzymes （Alul, Rsal, HinfI and HhaI） revealed distinctness of six Indian isolates of Steinernema one each from Maharashtra （IARI-EPN-mh）, Himachal Pradesh （IARI-EPN-hp）, Dehradun （IARI-EPN-dhdl）, Jharkhand （IARI-EPN-jhl） and two from Madhya Pradesh （IARI-EPN-bpll ＆ IARI-EPN-gwll）, when compared with the only native species Steinernema thermophilum. One of the restriction enzyme, Rsal could differentiate all the six species/strains from one another. The three restriction enzymes yielded patterns which were of diagnostic value but Rsal appeared to be the best diagnostic marker for differentiating these isolates. A tree constructed based upon the band sharing amongst the isolates, produced trichotomy which placed strains from Madhya Pradesh and Jharkhand in one group showing 94% homology, one strain from Bhopal （M.P） formed separate clade along with S. thermophilum with 72% similarity. These isolates, from Maharashtra, Himachal Pradesh and Dehradun, showed only 51% similarity with the S. thermophilum by forming separate clade.