A numerical method is developed based on an unstructured mesh to compute an ionized hypersonic flowfield with radiation in the thermo-chemical nonequilibrium. The flowfield is described by multi-species NavierStocks e...A numerical method is developed based on an unstructured mesh to compute an ionized hypersonic flowfield with radiation in the thermo-chemical nonequilibrium. The flowfield is described by multi-species NavierStocks equations. The chemical model includes 11 species （O2, N2, O, N, NO, NO^＋ , N^＋ , O^＋, N2^＋ , O2^＋, e^- ） and 20 reactions. For simulating the thermal non-equilibrium effect, the two-temperature model is considered. The finite volume method （FVM） used for the spatial and directional discretization of radiative transfer equation（RTE） is described for unstructured grids. The numerical code can handle different kinds of species and radiative bands in a gas thermodynamicly described by two temperatures. In particular, the Delta, Epsilon, Beta prime, and Gamma prime bands of NO are choosen and the distribution of the radiation intensity is obtained.展开更多
The phenomenon of direct-contact condensation,used in steam driven jet injectors,nuclear reactor emergency core cooling systems and direct-contact heat exchangers,was investigated computationally by introducing a ther...The phenomenon of direct-contact condensation,used in steam driven jet injectors,nuclear reactor emergency core cooling systems and direct-contact heat exchangers,was investigated computationally by introducing a thermal equilibrium model for direct-contact condensation of steam in subcooled water.The condensation model presented was a two resistance model which takes care of the heat transfer process on both sides of the interface and uses a variable steam bubble diameter.The injection of supersonic steam jet in subcooled water tank was simulated using the Euler-Euler multiphase flow model of Fluent 6.3 code with the condensation model incorporated. The findings of the computational fluid dynamics（CFD） simulations were compared with the published experimental data and fairly good agreement was observed between the two,thus validating the condensation model.The results of CFD simulations for dimensionless penetration length of steam plume varies from 2.73-7.33,while the condensation heat transfer coefficient varies from 0.75-0.917 MW·（m ^2 ·K）^ -1 for water temperature in the range of 293-343 K.展开更多
A vapor liquid equilibrium model and its related interactive energy parameters based on UNIQUAC model for the H2O-NH3-CO2 system without solid phase at the conditions of temperature from 30℃ to 90℃, pressure from 0....A vapor liquid equilibrium model and its related interactive energy parameters based on UNIQUAC model for the H2O-NH3-CO2 system without solid phase at the conditions of temperature from 30℃ to 90℃, pressure from 0.1 MPa to 0.4 MPa, and the maximum NH3 mass fraction up to 0.4 are provided. This model agrees with experimental data well (average relative error < 1%) and is useful for analysis of industrial urea production.展开更多
The electromotive force （e.m.f.） of solid oxide fuel cells using biomass produced gas （BPG） as the fuels is calculated at 700-1,200 K using an in-house computer program, based on thermodynamic equilibrium analysis...The electromotive force （e.m.f.） of solid oxide fuel cells using biomass produced gas （BPG） as the fuels is calculated at 700-1,200 K using an in-house computer program, based on thermodynamic equilibrium analysis. Tour program also predicts the concentration of oxygen in the fuel chamber as well as the concentration of equilibrium species such as H2, CO, CO2 and CH4. Compared with using hydrogen as a fuel, the e.m.f. for cells using BPG as the fuels is relative low and strongly influenced by carbon deposition. To remove carbon deposition, the optimum amount of H2O to add is determined at various operating temperatures. Further the e.m.f, for cells based on yttria stabilized zirconia and doped ceria as electrolytes are compared. The study reveals that when using BPG as fuel, the depression of e.m.f, for a SOFC using doped ceria as electrolyte is relatively small when compared with that using Yttria stabilized zirconia.展开更多
When species in the solution undergo multiple chemical reactions, the solution may be treated as a solution of all species actually present or as a hypothetical solution composed of elemental species. Based on the fu...When species in the solution undergo multiple chemical reactions, the solution may be treated as a solution of all species actually present or as a hypothetical solution composed of elemental species. Based on the fundamental thermodynamic principle, the relationships of mole numbers, molar fractions, thermodynamic properties, partial molar properties, potential and fugacity between the hypothetical solution of elemental species and the equilibrated solution of actual species were derived. The hypothetical elemental solution provides a way of reducing the dimensionality of problem, simplifying the analysis and visualizing the phase behavior.展开更多
By taking into account thermic emission current from hot dust surface, the problem involved in dust charging and levitation of dust grains in plasma sheath has been researched. The results are compared to that without...By taking into account thermic emission current from hot dust surface, the problem involved in dust charging and levitation of dust grains in plasma sheath has been researched. The results are compared to that without including thermal emission current while the system parameters are same. It is found that the thermal emission current has played a significant role on modifying the dust charging and balance levitations. Both of the charging numbers of dust and the dust radius in balance are dramatically reduced. The stability of dust levitation is also analyzed and discussed.展开更多
文摘A numerical method is developed based on an unstructured mesh to compute an ionized hypersonic flowfield with radiation in the thermo-chemical nonequilibrium. The flowfield is described by multi-species NavierStocks equations. The chemical model includes 11 species （O2, N2, O, N, NO, NO^＋ , N^＋ , O^＋, N2^＋ , O2^＋, e^- ） and 20 reactions. For simulating the thermal non-equilibrium effect, the two-temperature model is considered. The finite volume method （FVM） used for the spatial and directional discretization of radiative transfer equation（RTE） is described for unstructured grids. The numerical code can handle different kinds of species and radiative bands in a gas thermodynamicly described by two temperatures. In particular, the Delta, Epsilon, Beta prime, and Gamma prime bands of NO are choosen and the distribution of the radiation intensity is obtained.
文摘The phenomenon of direct-contact condensation,used in steam driven jet injectors,nuclear reactor emergency core cooling systems and direct-contact heat exchangers,was investigated computationally by introducing a thermal equilibrium model for direct-contact condensation of steam in subcooled water.The condensation model presented was a two resistance model which takes care of the heat transfer process on both sides of the interface and uses a variable steam bubble diameter.The injection of supersonic steam jet in subcooled water tank was simulated using the Euler-Euler multiphase flow model of Fluent 6.3 code with the condensation model incorporated. The findings of the computational fluid dynamics（CFD） simulations were compared with the published experimental data and fairly good agreement was observed between the two,thus validating the condensation model.The results of CFD simulations for dimensionless penetration length of steam plume varies from 2.73-7.33,while the condensation heat transfer coefficient varies from 0.75-0.917 MW·（m ^2 ·K）^ -1 for water temperature in the range of 293-343 K.
文摘A vapor liquid equilibrium model and its related interactive energy parameters based on UNIQUAC model for the H2O-NH3-CO2 system without solid phase at the conditions of temperature from 30℃ to 90℃, pressure from 0.1 MPa to 0.4 MPa, and the maximum NH3 mass fraction up to 0.4 are provided. This model agrees with experimental data well (average relative error < 1%) and is useful for analysis of industrial urea production.
基金V. ACKN0WLEDGMENT This work was supported by the National Natural Science Foundation of China （No.50372066 and No.50332040）.
文摘The electromotive force （e.m.f.） of solid oxide fuel cells using biomass produced gas （BPG） as the fuels is calculated at 700-1,200 K using an in-house computer program, based on thermodynamic equilibrium analysis. Tour program also predicts the concentration of oxygen in the fuel chamber as well as the concentration of equilibrium species such as H2, CO, CO2 and CH4. Compared with using hydrogen as a fuel, the e.m.f. for cells using BPG as the fuels is relative low and strongly influenced by carbon deposition. To remove carbon deposition, the optimum amount of H2O to add is determined at various operating temperatures. Further the e.m.f, for cells based on yttria stabilized zirconia and doped ceria as electrolytes are compared. The study reveals that when using BPG as fuel, the depression of e.m.f, for a SOFC using doped ceria as electrolyte is relatively small when compared with that using Yttria stabilized zirconia.
基金Supported by the National Natural Science Foundation of China (No. 29976035) and the Natural Science Foundation of Zhejiang and Fujian Province.
文摘When species in the solution undergo multiple chemical reactions, the solution may be treated as a solution of all species actually present or as a hypothetical solution composed of elemental species. Based on the fundamental thermodynamic principle, the relationships of mole numbers, molar fractions, thermodynamic properties, partial molar properties, potential and fugacity between the hypothetical solution of elemental species and the equilibrated solution of actual species were derived. The hypothetical elemental solution provides a way of reducing the dimensionality of problem, simplifying the analysis and visualizing the phase behavior.
文摘By taking into account thermic emission current from hot dust surface, the problem involved in dust charging and levitation of dust grains in plasma sheath has been researched. The results are compared to that without including thermal emission current while the system parameters are same. It is found that the thermal emission current has played a significant role on modifying the dust charging and balance levitations. Both of the charging numbers of dust and the dust radius in balance are dramatically reduced. The stability of dust levitation is also analyzed and discussed.
