How to model the permeability evolution of rock subjected to liquid nitrogen cooling is a key issue. This paper proposes a simple but practical method to study the permeability evolution of rocks subject to liquid nit...How to model the permeability evolution of rock subjected to liquid nitrogen cooling is a key issue. This paper proposes a simple but practical method to study the permeability evolution of rocks subject to liquid nitrogen cooling. FLAC with FISH function was employed to numerically model the rock behavior under cooling. The enhanced perme- ability of the volumetric strain was defined, and the permeability was directly evaluated based on element＇s volumetric strain. Detailed procedures for implementing the evolution model of permeability in this paper were presented. A case study was carried out to simulate a coal bed where liquid nitrogen was injected in the bore hole. And a semi-submerged test of liquid nitrogen was performed. The method to model the permeability evolution of rocks subject to liquid nitrogen shock in this paper was proved to be right by the test results. This simulation results are discussed with the hope to provide some insight into understanding the nitrogen cooling practice.展开更多
To reveal the affecting mechanism of cooling rate on lamellarαprecipitation,the precipitation behaviors of lamellarαphase in IMI834 titanium alloy during isothermal and non-isothermal heat treatments were quantitati...To reveal the affecting mechanism of cooling rate on lamellarαprecipitation,the precipitation behaviors of lamellarαphase in IMI834 titanium alloy during isothermal and non-isothermal heat treatments were quantitatively characterized using experimental analysis.Critical precipitation temperatures at various cooling rates were obtained using thermal dilatation testing.Using metallographic microscopy,electron microprobe analysis,and data fitting methods,the quantitative evolution models of average width,volume fraction,and solute concentration in theαandβphases were built for different temperatures or cooling rates.A comparison between the two precipitation behaviors showed that the average width and volume fraction of lamellarαphase under non-isothermal conditions were smaller than those under isothermal conditions.With increasing cooling rate,the average width and volume fraction were decreased significantly,and the critical precipitation temperatures were reduced.This phenomenon is mainly attributed to the decreased diffusion velocity of solutes Al,Mo,and Nb with increasing cooling rate.展开更多
Bulk Ni-Mo composites were prepared by a simple solid reaction method and the hydrodeoxygenation activity of samples was examined. The test results showed that the Ni-Mo catalysts possessed high catalytic activity for...Bulk Ni-Mo composites were prepared by a simple solid reaction method and the hydrodeoxygenation activity of samples was examined. The test results showed that the Ni-Mo catalysts possessed high catalytic activity for hydrogenation of p-cresol under mild conditions. The XRD, N_2 isothermal adsorption, NH_3-TPD characterization analyses indicated that the excellent hydrogenation performance of Ni-Mo catalysts could be attributed to their incorporated Mo metal, the developed pore system, and the strong acidity.展开更多
Lacustrine turbidite of Chang-7 Member in the studied area consists of sihstone and fine sandstone with respect to grain size, which is feldspathic lithie sandstone, syrosem arkose and arkose with respect to mineral c...Lacustrine turbidite of Chang-7 Member in the studied area consists of sihstone and fine sandstone with respect to grain size, which is feldspathic lithie sandstone, syrosem arkose and arkose with respect to mineral constitution affected by provenance. There are such apparent signatures as lithology, sedimentary structure, sedimentary sequence and well logs, to recognize turbidite. During the paleogeographic evolution of Chang-7 Member, lake basin and deep lake are both at their maximum extent during Chang-73 stage, resulting in the deposition of Zhangjiatan shale with widespread extent and of turbidite with fragmental-like. Deep lake line is gradually moving toward lake center and turbidite sand bodies are gradually turning better with better lateral continuity, connectivity and more thickness, from stages of Chang-73, Chang-72 and Chang-7t, which can be favorable reservoir in deep-water.展开更多
文摘How to model the permeability evolution of rock subjected to liquid nitrogen cooling is a key issue. This paper proposes a simple but practical method to study the permeability evolution of rocks subject to liquid nitrogen cooling. FLAC with FISH function was employed to numerically model the rock behavior under cooling. The enhanced perme- ability of the volumetric strain was defined, and the permeability was directly evaluated based on element＇s volumetric strain. Detailed procedures for implementing the evolution model of permeability in this paper were presented. A case study was carried out to simulate a coal bed where liquid nitrogen was injected in the bore hole. And a semi-submerged test of liquid nitrogen was performed. The method to model the permeability evolution of rocks subject to liquid nitrogen shock in this paper was proved to be right by the test results. This simulation results are discussed with the hope to provide some insight into understanding the nitrogen cooling practice.
基金financial supports from the National Natural Science Foundation of China(No.51675433)the Natural Science Foundation for Distinguished Young Scholars of Shaanxi Province,China(No.2019JC-09)。
文摘To reveal the affecting mechanism of cooling rate on lamellarαprecipitation,the precipitation behaviors of lamellarαphase in IMI834 titanium alloy during isothermal and non-isothermal heat treatments were quantitatively characterized using experimental analysis.Critical precipitation temperatures at various cooling rates were obtained using thermal dilatation testing.Using metallographic microscopy,electron microprobe analysis,and data fitting methods,the quantitative evolution models of average width,volume fraction,and solute concentration in theαandβphases were built for different temperatures or cooling rates.A comparison between the two precipitation behaviors showed that the average width and volume fraction of lamellarαphase under non-isothermal conditions were smaller than those under isothermal conditions.With increasing cooling rate,the average width and volume fraction were decreased significantly,and the critical precipitation temperatures were reduced.This phenomenon is mainly attributed to the decreased diffusion velocity of solutes Al,Mo,and Nb with increasing cooling rate.
基金supported by grants from the National Natural Science Foundation of China(No. 21306106)the Open Foundation of the State Key Laboratory of Bioactive Seaweed Substances,Qingdao Brightmoon Seaweed Group Co., Ltd.(No. SKL-BASS1723)
文摘Bulk Ni-Mo composites were prepared by a simple solid reaction method and the hydrodeoxygenation activity of samples was examined. The test results showed that the Ni-Mo catalysts possessed high catalytic activity for hydrogenation of p-cresol under mild conditions. The XRD, N_2 isothermal adsorption, NH_3-TPD characterization analyses indicated that the excellent hydrogenation performance of Ni-Mo catalysts could be attributed to their incorporated Mo metal, the developed pore system, and the strong acidity.
文摘Lacustrine turbidite of Chang-7 Member in the studied area consists of sihstone and fine sandstone with respect to grain size, which is feldspathic lithie sandstone, syrosem arkose and arkose with respect to mineral constitution affected by provenance. There are such apparent signatures as lithology, sedimentary structure, sedimentary sequence and well logs, to recognize turbidite. During the paleogeographic evolution of Chang-7 Member, lake basin and deep lake are both at their maximum extent during Chang-73 stage, resulting in the deposition of Zhangjiatan shale with widespread extent and of turbidite with fragmental-like. Deep lake line is gradually moving toward lake center and turbidite sand bodies are gradually turning better with better lateral continuity, connectivity and more thickness, from stages of Chang-73, Chang-72 and Chang-7t, which can be favorable reservoir in deep-water.
