期刊文献+
共找到10篇文章
< 1 >
每页显示 20 50 100
希望恢复使用“重量”一词
1
作者 无名 《汽车与驾驶维修(汽车版)》 1999年第8期52-52,共1页
从按新标准规定以"质量"取代"重量"以来,经过多年的使用,至今仍在人们的生产中和生活上常常造成矛盾与混淆,在报刊与杂志上也常常遇到无法取代的困难。今刊出读者"无名"的来稿,以供各界人士尤其是标准制... 从按新标准规定以"质量"取代"重量"以来,经过多年的使用,至今仍在人们的生产中和生活上常常造成矛盾与混淆,在报刊与杂志上也常常遇到无法取代的困难。今刊出读者"无名"的来稿,以供各界人士尤其是标准制定者们参考与商榷。 展开更多
关键词 汽车质量 使用重量 汽车行业 混淆 取代 物理学名词 产品质量管理 地球引力 矛盾 新标准
下载PDF
民用飞机使用空机重量估算方法研究 被引量:1
2
作者 程江涛 白璐 +1 位作者 袁昌运 张征 《航空科学技术》 2022年第11期21-26,共6页
使用空机重量是飞机概念方案设计中的重要参数之一,其相对大小直接体现了飞机的设计效率,表征飞机在材料应用、结构设计、系统架构等方面的先进性。本文对目前使用空机重量估算常用的几种方法进行了研究,分析对比了传统线性拟合方法以... 使用空机重量是飞机概念方案设计中的重要参数之一,其相对大小直接体现了飞机的设计效率,表征飞机在材料应用、结构设计、系统架构等方面的先进性。本文对目前使用空机重量估算常用的几种方法进行了研究,分析对比了传统线性拟合方法以及非线性拟合方法在实际应用中的适用性,并以宽体客机为例进行了估算分析。在此基础上,考虑样本数量较少和神经网络方法的优点的情况下,基于径向基(RBF)神经网络建立了一种新的估算模型,并将其应用于飞机使用空机重量估算,结果显示新方法大大提高了估算精度,对民用飞机概念设计阶段的使用空机重量估算具有直接参考价值。 展开更多
关键词 使用空机重量 民用客机 估算方法 线性拟合 非线性拟合 径向基神经网络
下载PDF
移山填海我国推土机的发展现状和应对策略 被引量:1
3
作者 张天琦 《交通世界》 2001年第6期38-43,共6页
我国推土机的发展经历 修造阶段 建国初期,我国的工业特别是重工业处于百废待兴阶段,尚无能力设计制造推土机这样的重型机械。在很长一段时间内,仅能在修理国外履带式拖拉机的过程中制造所需的零配件。 1958年。
关键词 推土机 填海 应对策略 发展现状 铲刀 使用重量 支重轮 额定功率 半刚性悬挂 履带式拖拉机
下载PDF
恩梯恩开发出新型油压式张紧轮
4
《汽车工程学报》 2009年第4期9-9,共1页
恩梯恩开发出了静音性出色且可延长皮带寿命的高响应型油压式张紧轮,并开始面向乘用车正时皮带用途量产。通过在止回阀上使用重量较轻的陶瓷球。
关键词 张紧轮 止回阀 油压 正时皮带 使用重量 陶瓷球 乘用车 高响应 长寿命化 皮带张力
下载PDF
维美德BM120型拖拉机八大优点
5
《农机科技推广》 2003年第2期41-41,共1页
SISU赛速发动机: 是欧洲有100多年悠久历史的品牌;专门为农业作业设计;额定功率126hp,6缸自然进气;质量可靠、油耗低、功率大、低温启动性好;中间支撑的湿式缸套是其专利,噪音低、使用寿命长、作业成本低。 变速箱: 采用斜齿轮传动,噪... SISU赛速发动机: 是欧洲有100多年悠久历史的品牌;专门为农业作业设计;额定功率126hp,6缸自然进气;质量可靠、油耗低、功率大、低温启动性好;中间支撑的湿式缸套是其专利,噪音低、使用寿命长、作业成本低。 变速箱: 采用斜齿轮传动,噪音低、寿命长,并带有电液控制的增扭器,在负荷作业时能实现不停车增减速。16个前进挡、8个倒退挡,全同步器换挡,多种速度可满足各种农田作业需求。 展开更多
关键词 维美德BM120型拖拉机 SISU赛速发动机 变速箱 液压提升系统 驾驶室 使用重量 整机结构 动力输出
下载PDF
An Analysis of the Impact of Charging for Plastic Shopping Bags to Retailers in Japan
6
作者 Shigezo Shukuya Kosuke Toshiki Shoichi Kunikane 《Journal of Environmental Science and Engineering(B)》 2012年第2期260-271,共12页
In accordance with a revision of the Containers and Packaging Recycling Law, there is an accelerating trend towards charging for plastic shopping bags (PSBs) in Japan for the purpose of reducing their discharge. The... In accordance with a revision of the Containers and Packaging Recycling Law, there is an accelerating trend towards charging for plastic shopping bags (PSBs) in Japan for the purpose of reducing their discharge. The objectives of this research were to gauge, by means of a questionnaire survey, the opinions of retailers with regard to charging for PSBs, and to consider future directions for reducing the quantity of waste discharged. A questionnaire survey on charging for PSBs was conducted for retail stores in Shizuoka City. The survey was carried out in two phases. The results of the first phase (August to October 2008) showed that supermarkets were generally positive, while conversely other retailer types were negative. The results of the second phase (November to December, 2010), targeting only supermarkets that had introduced charging after the first survey, showed that there was no major confusion and the shift proceeded relatively smoothly. In addition, the number of customers did not decline on account of charging, and the ratio of shoppers bringing their own reusable "eco bags" jumped dramatically. On these accounts, it is evident that charging for PSBs is an effective means of reducing usage of PSBs. The authors view it as important for the relevant governmental agencies to work towards promoting charging at retailers and simultaneously repeatedly explaining to consumers the necessity for charging. 展开更多
关键词 Charging for plastic shopping bags questionnaire survey retailers' attitude survey Containers and Packaging Recycling
下载PDF
Stride length-velocity relationship during running with body weight support
7
作者 John A. Mercer Carmen Chona 《Journal of Sport and Health Science》 SCIE 2015年第4期391-395,共5页
Background: Lower body positive pressure (LBPP) treadmills can be used in rehabilitation programs and/or to supplement tun mileage in healthy runners by reducing the effective body weight and impact associated with... Background: Lower body positive pressure (LBPP) treadmills can be used in rehabilitation programs and/or to supplement tun mileage in healthy runners by reducing the effective body weight and impact associated with running. The purpose of this study is to determine if body weight support influences the stride length (SL)-velocity as well as leg impact acceleration relationship during running. Methods: Subjects (n = 10, 21.4 ± 2.0 years, 72.4 ± 10.3 kg, 1.76 ± 0.09 m) completed 16 run conditions consisting of specific body weight support and velocity combinations. Velocities tested were 100%, 110%, 120%, and 130% of the preferred velocity (2.75± 0.36 m/s). Body weight support conditions consisted of 0, 60%,5, 70%, and 80% body weight support. SL and leg impact accelerations were determined using a light-weight accelerometer mounted on the surface of the anterior-distal aspect of the tibia. A 4 × 4 (velocity x body weight support) repeated measures ANOVA was used for each dependent variable (a = 0.05). Results: Neither SL nor leg impact acceleration were influenced by the interaction of body weight support and velocity (p 〉 0.05). SL was least during no body weight support (p 〈 0.05) but not different between 60%, 70%, and 80% support (p 〉 0.05). Leg impact acceleration was greatest during no body weight support (p 〈 0.05) but not different between 60%, 70%, and 80% support (p 〉 0.05). SL and leg impact accelerations increased with velocity regardless of support (p 〈 0.05). Conclusion: The relationships between SL and leg impact accelerations with velocity were not influenced by body weight support. 展开更多
关键词 Overuse injury REHABILITATION Running economy Stride length-speed
下载PDF
飞越靶心
8
作者 略施一计 《小学生时代》 2007年第3期18-18,共1页
[任务]制作一个手掷的"飞行器",用手投掷使其飞行,并能凌空穿越距离7米远的靶洞。靶洞的得分规则如图[飞行器的要求]1.重量限制在5克之内(相当于一枚5角加一枚1角硬币的重量)。如大于5克,每增加0.5克在得分中扣除5分。2.制作... [任务]制作一个手掷的"飞行器",用手投掷使其飞行,并能凌空穿越距离7米远的靶洞。靶洞的得分规则如图[飞行器的要求]1.重量限制在5克之内(相当于一枚5角加一枚1角硬币的重量)。如大于5克,每增加0.5克在得分中扣除5分。2.制作材料不限,但必须确保安全。3.用手投掷飞行器,不得使用其他动力。4.飞行器必须有飞行(盘旋、滑翔)状态。5.投掷时不得助跑。 展开更多
关键词 飞行器 投掷 分规则 制作材料 确保安全 使用重量 滑翔 助跑 硬币 距离
原文传递
DGQ40全液压吊管机
9
作者 胡浩 《工程机械文摘》 2003年第3期30-30,共1页
三一重工股份有限公司在全液压履带底盘基础上,成功开发出 DGQ40全液压吊管机。该机采用德国 DEUTZ BF6M1 013ECP 发动机,行驶速度10km/h(前进)、10 km/h(后退),整机使用重量40000 kg,最小离地间隙410 mm,最大爬坡能力:20°(空载),... 三一重工股份有限公司在全液压履带底盘基础上,成功开发出 DGQ40全液压吊管机。该机采用德国 DEUTZ BF6M1 013ECP 发动机,行驶速度10km/h(前进)、10 km/h(后退),整机使用重量40000 kg,最小离地间隙410 mm,最大爬坡能力:20°(空载),最小转弯半径2600 mm。 展开更多
关键词 吊管机 全液压推土机 发动机寿命 股份有限公司 最小转弯半径 最小离地间隙 履带底盘 使用重量 爬坡能力 行驶速度
原文传递
Recovery of the gravity field from GOCE data by using the invariants of gradient tensor 被引量:11
10
作者 YU JinHai WAN XiaoYun 《Science China Earth Sciences》 SCIE EI CAS 2013年第7期1193-1199,共7页
The gravity field models GUCAS_EGM and GUCAS_EGM_DL are established from GOCE data (GOCE Level 2 Products from Nov. 1 to Dec. 31, 2009) based on the method of the invariants of the gravity gradient tensor, where GUCAS... The gravity field models GUCAS_EGM and GUCAS_EGM_DL are established from GOCE data (GOCE Level 2 Products from Nov. 1 to Dec. 31, 2009) based on the method of the invariants of the gravity gradient tensor, where GUCAS_EGM is derived after GOCE gravity gradient data are filtered with FIR, and GUCAS_EGM_DL is computed with an additional Durbin-Levison arithmetic apart from FIR. Since this method, different from current programs dealing with GOCE data, is introduced for the first time, some new problems are required to be discussed in advance; for example, how to filter GOCE gravity gradient data, how to compute the invariants of the gradient tensor, and how to deal with the pole gap and so on. In addition, by comparing our models with ones recommended by ESA, it can be seen that the variations of GUCAS_EGM and the models recommended by ESA to EGM08 are almost equivalent, and the variation of GUCAS_EGM_DL to EGM08 is obviously less than ones of the recommended models. 展开更多
关键词 GOCE invariants of gravity tensor gravity field model
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部