期刊文献+
共找到5篇文章
< 1 >
每页显示 20 50 100
特低渗油藏CO2混相驱注采压力系统保压设计方法 被引量:2
1
作者 刘同敬 赵习森 +2 位作者 任允鹏 第五鹏祥 刘睿 《科学技术与工程》 北大核心 2020年第6期2237-2245,共9页
为实现特低渗油藏注CO2后形成混相驱,通过渗流力学和油藏工程方法研究特低渗油藏CO2混相驱注采压力系统保压设计方法。首先,利用等值渗流阻力法,考虑特低渗油藏压裂后储层渗透率分布的“四台阶”特性,建立特低渗油藏CO2混相驱渗流阻力... 为实现特低渗油藏注CO2后形成混相驱,通过渗流力学和油藏工程方法研究特低渗油藏CO2混相驱注采压力系统保压设计方法。首先,利用等值渗流阻力法,考虑特低渗油藏压裂后储层渗透率分布的“四台阶”特性,建立特低渗油藏CO2混相驱渗流阻力数学模型;其次,考虑CO2注入地层后溶解于原油所引起的驱替滞后效应,引入CO2驱迟滞因子,对传统前缘推进方程进行修正。在此基础上,建立特低渗油藏CO2混相驱注采压力系统保压设计方法,并从注采压差、注采井距、水井近井渗透率、油井近井渗透率四个方面进行单因素影响程度分析;最后,绘制M油藏在不同注采压差条件下注入速度与CO2混相驱驱替前缘位置的关系图版。结果表明:注采压差对各项保压设计参数影响最大;纯油相区渗流阻力与混相区渗流阻力的比值仅与注采压差有关,与其他因素和驱替前缘位置无关;注入速度是CO2混相驱保压设计的关键,在合理施工参数范围内,注CO2无法实现全程混相驱,驱替前缘极限位置约在油水井距的3/4位置处。研究结果为特低渗油藏CO2混相驱注采压力系统保压设计提供了理论依据和技术指导。 展开更多
关键词 特低渗油藏 CO2混相驱 渗流阻力 驱替前缘 保压设计
下载PDF
“半浮动”取心保压球阀的设计研究 被引量:1
2
作者 刘合 温鹏云 +2 位作者 宋微 董康兴 王素玲 《湖南大学学报(自然科学版)》 EI CAS CSCD 北大核心 2023年第2期173-180,共8页
现行机械式保压球阀受限于井下狭小空间,保压能力弱、保压成功率低、灵活性差.针对以上问题,提出一种“半浮动”取心保压球阀设计构想.基于保压取心技术要求,采用数值仿真及理论计算,设计研发了一种“半浮动”球阀保压控制技术,创新设... 现行机械式保压球阀受限于井下狭小空间,保压能力弱、保压成功率低、灵活性差.针对以上问题,提出一种“半浮动”取心保压球阀设计构想.基于保压取心技术要求,采用数值仿真及理论计算,设计研发了一种“半浮动”球阀保压控制技术,创新设计的“半浮动”承压结构改变了球阀承压位置,有效增强了球阀承压能力.提出了一种气动式的新型控制方式,球阀启闭可控,可以有效解决大斜度井、水平井作业中球阀关闭难题.分别对“半浮动”及固定球阀阀体、阀座进行了有限元对比分析,“半浮动”球阀承压能力达到70 MPa,保压能力显著提升.通过理论计算确定了球阀的转矩及最小气体压力.研究结果可为保压取心技术的发展提供一定技术支撑. 展开更多
关键词 取心技术 球阀设计 能力 球阀密封 有限元分析
下载PDF
压机液压系统设计 被引量:5
3
作者 盖晓明 黎勤 《液压气动与密封》 2007年第4期40-41,共2页
本文针对压机液压系统的保压要求,合理设计了满足长时间保压的液压系统。
关键词 系统 保压设计
下载PDF
压机液压系统设计
4
作者 盖晓明 《液压气动与密封》 2007年第5期51-52,共2页
本文针对压机液压系统的保压要求,合理设计了满足长时间保压的液压系统。
关键词 系统 保压设计
下载PDF
Design and testing of a centralized protection scheme for micro-grids 被引量:1
5
作者 Sohrab Mirsaeidi Dalila Mat Said +2 位作者 Mohammad Wazir Mustafa Mohammad Hafiz Habibuddin Kimia Ghaffari 《Journal of Central South University》 SCIE EI CAS CSCD 2015年第10期3876-3887,共12页
Micro-grids comprise low voltage distribution systems with distributed energy resources(DERs) and controllable loads which can operate connected to the medium voltage grid or islanded in a controlled coordinated way. ... Micro-grids comprise low voltage distribution systems with distributed energy resources(DERs) and controllable loads which can operate connected to the medium voltage grid or islanded in a controlled coordinated way. This concept aims to move from "connect and forget" philosophy towards a full integration of DERs. Micro-grids can provide numerous economic and environmental benefits for end-customers, utilities and society. However, their implementation poses great technical challenges, such as a new philosophy in design of protection systems. In this work, a micro-grid protection scheme is presented based on positive-sequence component using phasor measurement units(PMUs) and a central protection unit(CPU). The salient feature of the proposed scheme in comparison with the previous works is that it has the ability to protect both radial and looped micro-grids against different types of faults with the capability of single-phase tripping. Furthermore, since the CPU is capable of updating its pickup values(upstream and downstream equivalent positive-sequence impedances of each line) after the first change in the micro-grid configuration(such as transferring from grid-connected to islanded mode and or disconnection of a line, bus, or DER either in grid-connected mode or in islanded mode), it can protect micro-grid against subsequent faults. Finally, in order to verify the effectiveness of the suggested scheme and the CPU, several simulations have been undertaken by using DIg SILENT Power Factory and MATLAB software packages. 展开更多
关键词 micro-grid protection grid-connected mode islanded mode positive-sequence component
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部