This paper introduces a novel automatic physical synthesis methodology for analog circuits based on the signal-flow analysis.Circuit analysis sub-system adopts the newly advanced methodology,circuit topology analysis,...This paper introduces a novel automatic physical synthesis methodology for analog circuits based on the signal-flow analysis.Circuit analysis sub-system adopts the newly advanced methodology,circuit topology analysis,and circuit sensitivity analysis to generate layout constraints and control performance degradations.Considering the heuristic information about signal-flow,complexity of the methodology is less than the pure performance-driven methodology.And then these constraints are implemented in device generation,placement,and routing sub-systems separately,which makes the different constraints be satisfied at most easily implemented stages.Excellent circuit performance obtained by the methodology is demonstrated by practical circuit examples.展开更多
Kang, et al. [Journal of Electronics(China), 23(2006)4] proposed a threshold multi-proxy multi-signature scheme, and claimed the scheme satisfies the security requirements of threshold multi-proxy multi-signature. How...Kang, et al. [Journal of Electronics(China), 23(2006)4] proposed a threshold multi-proxy multi-signature scheme, and claimed the scheme satisfies the security requirements of threshold multi-proxy multi-signature. However, in this paper, two forgery attacks are proposed to show that their schemes have serious security flaws. To overcome theses flaws, an improvement on Kang, et al.’s scheme is proposed.展开更多
HAXPES （hard X-ray photoelectron spectroscopy） is a powerful emerging instrument in surface analysis. It extended the photoelectron energy range up to 15,000 eV and opened the possibility to study much thicker films...HAXPES （hard X-ray photoelectron spectroscopy） is a powerful emerging instrument in surface analysis. It extended the photoelectron energy range up to 15,000 eV and opened the possibility to study much thicker films, buried layers and bulk electronic properties. In order to study these features, data for the electron IMFP （inelastic mean free path） at these energies is needed. To date, only calculated IMFP are available at energies above 5,000 eV and therefore experimental validation of these calculations are essential. In this paper, a new approach for using the HAXPES spectra is presented. This approach, treats the attenuated part of the electron spectrum as a whole to calculating the average electron energy loss. This average electron energy loss is the result of inelastic collisions in the material and hence, carry with it information about the electron transport poses. Carbon layers with thicknesses between 20 and 75 nanometer deposited over copper substrate were used to test this approach at the Spanish beam-line （Spline） in the ESRF （European synchrotron radiation facility）. The measured results showed good agreement with the predictions of the multiple inelastic scattering theory. In addition, an algorithm for the experimental evaluation of electron IMFP, using the measured energy loss, is proposed.展开更多
The chattering noise problem of reed switch sensor signal for Automatic Meter Reading system was analyzed experimentally under various types of external vibrations and shocks. The external vibration level amplitude wa...The chattering noise problem of reed switch sensor signal for Automatic Meter Reading system was analyzed experimentally under various types of external vibrations and shocks. The external vibration level amplitude was measured with an accelerometer. To apply for water flow measurement devices, the reed switch sensors should keep high reliability. But the measured digital meter data are occurred difference or errors by chattering noise. The reed switch contains chattering error by itself at the force equivalent position. The vibrations such as passing vehicle near to the reed switch installed location causes chattering. In order to reduce chattering error, most system uses just software methods, for example using digital filter algorithm and also statistical calibration methods. However software approaches were implemented for reducing chattering error, there has still generated chattering error due to external mechanical vibrations and magnetic field. The chattering errors can be reduced by changing leaf spring structure using mechanical hysteresis characteristics.展开更多
This paper derives an approximate formula for probability density function(PDF) of received signal-to-interference-and-noise ratio(SINR) at user terminal when matched filter(MF) is adopted at a base station(BS).This d...This paper derives an approximate formula for probability density function(PDF) of received signal-to-interference-and-noise ratio(SINR) at user terminal when matched filter(MF) is adopted at a base station(BS).This distribution of SINR can be used to make an analysis of average sum-rate,outage probability,and symbol error rate of massive MIMO downlink with MF at BS.From simulation,it is found that the derived approximate analytical expression for PDF of SINR is consistent with the simulated exact PDF from the definition of SINR in medium-scale and large-scale MIMO systems.展开更多
文摘This paper introduces a novel automatic physical synthesis methodology for analog circuits based on the signal-flow analysis.Circuit analysis sub-system adopts the newly advanced methodology,circuit topology analysis,and circuit sensitivity analysis to generate layout constraints and control performance degradations.Considering the heuristic information about signal-flow,complexity of the methodology is less than the pure performance-driven methodology.And then these constraints are implemented in device generation,placement,and routing sub-systems separately,which makes the different constraints be satisfied at most easily implemented stages.Excellent circuit performance obtained by the methodology is demonstrated by practical circuit examples.
基金Supported by the National Natural Science Foundation of China (No.60503005)the Natural Science Foundation of Hunan Province (No.07JJ6110)
文摘Kang, et al. [Journal of Electronics(China), 23(2006)4] proposed a threshold multi-proxy multi-signature scheme, and claimed the scheme satisfies the security requirements of threshold multi-proxy multi-signature. However, in this paper, two forgery attacks are proposed to show that their schemes have serious security flaws. To overcome theses flaws, an improvement on Kang, et al.’s scheme is proposed.
文摘HAXPES （hard X-ray photoelectron spectroscopy） is a powerful emerging instrument in surface analysis. It extended the photoelectron energy range up to 15,000 eV and opened the possibility to study much thicker films, buried layers and bulk electronic properties. In order to study these features, data for the electron IMFP （inelastic mean free path） at these energies is needed. To date, only calculated IMFP are available at energies above 5,000 eV and therefore experimental validation of these calculations are essential. In this paper, a new approach for using the HAXPES spectra is presented. This approach, treats the attenuated part of the electron spectrum as a whole to calculating the average electron energy loss. This average electron energy loss is the result of inelastic collisions in the material and hence, carry with it information about the electron transport poses. Carbon layers with thicknesses between 20 and 75 nanometer deposited over copper substrate were used to test this approach at the Spanish beam-line （Spline） in the ESRF （European synchrotron radiation facility）. The measured results showed good agreement with the predictions of the multiple inelastic scattering theory. In addition, an algorithm for the experimental evaluation of electron IMFP, using the measured energy loss, is proposed.
文摘The chattering noise problem of reed switch sensor signal for Automatic Meter Reading system was analyzed experimentally under various types of external vibrations and shocks. The external vibration level amplitude was measured with an accelerometer. To apply for water flow measurement devices, the reed switch sensors should keep high reliability. But the measured digital meter data are occurred difference or errors by chattering noise. The reed switch contains chattering error by itself at the force equivalent position. The vibrations such as passing vehicle near to the reed switch installed location causes chattering. In order to reduce chattering error, most system uses just software methods, for example using digital filter algorithm and also statistical calibration methods. However software approaches were implemented for reducing chattering error, there has still generated chattering error due to external mechanical vibrations and magnetic field. The chattering errors can be reduced by changing leaf spring structure using mechanical hysteresis characteristics.
基金Supported by the National Natural Science Foundation of China(No.61271230,61301107)the Fundamental Research Funds for the Central Universities(No.30920130122004)Open Research Fund of National Mobile Communications Research Laboratory,Southeast University(No.2013D02)
文摘This paper derives an approximate formula for probability density function(PDF) of received signal-to-interference-and-noise ratio(SINR) at user terminal when matched filter(MF) is adopted at a base station(BS).This distribution of SINR can be used to make an analysis of average sum-rate,outage probability,and symbol error rate of massive MIMO downlink with MF at BS.From simulation,it is found that the derived approximate analytical expression for PDF of SINR is consistent with the simulated exact PDF from the definition of SINR in medium-scale and large-scale MIMO systems.
