针对滚动轴承微弱故障特征信息易受噪声干扰提取困难的问题,提出一种新的滚动轴承故障特征提取方法,即协方差矩阵(covariance matrix,CM)、奇异值差分谱(singular value difference spectrum,SVDS)和奇异值中值分解(singular value medi...针对滚动轴承微弱故障特征信息易受噪声干扰提取困难的问题,提出一种新的滚动轴承故障特征提取方法,即协方差矩阵(covariance matrix,CM)、奇异值差分谱(singular value difference spectrum,SVDS)和奇异值中值分解(singular value median decomposition,SVMD)相结合。首先,考虑到旋转机械的故障特征,对轴承故障信号采用1步长方法构造Hankel矩阵;其次,考虑到信号的协方差矩阵对于信号自相关去噪的优势,进而计算Hankel的协方差矩阵并进行空间重构;再次,采用奇异值差分谱方法对重构后的协方差矩阵信号进行分解处理而实现初步降噪,通过奇异值中值分解方法对其进行分解和筛选处理而完成二次降噪,并根据处理后信号的频谱包络,实现轴承故障特征信息的提取;最后,通过滚动轴承仿真数据分析得出,所提方法能够有效提取出噪声信号的故障特征及其谐波,实现不同轴承故障类型特征的有效提取,为滚动轴承故障复杂信号处理和诊断提供了一种新的方法和途径。展开更多
In low earth orbit (LEO) satellite or missile communication scenarios, signals may experience extremely large Doppler shifts and have short visual time. Thus, direct sequence spread spectrum (DSSS) systems should be a...In low earth orbit (LEO) satellite or missile communication scenarios, signals may experience extremely large Doppler shifts and have short visual time. Thus, direct sequence spread spectrum (DSSS) systems should be able to achieve acquisition in a very short time in spite of large Doppler frequencies. However, the traditional methods cannot solve it well. This work describes a new method that uses a differential decoding technique for Doppler mitigation and a batch process of FFT (fast Fourier transform) and IFFT (invert FFT) for the purpose of parallel code phase search by frequency domain correlation. After the code phase is estimated, another FFT process is carried out to search the Doppler frequency. Since both code phase and Doppler frequency domains are searched in parallel, this architecture can provide acquisition fifty times faster than conventional FFT methods. The performance in terms of the probability of detection and false alarm are also analyzed and simulated, showing that a signal-to-noise ratio (SNR) loss of 3 dB is introduced by the differential decoding. The proposed method is an efficient way to shorten the acquisition time with slightly hardware increasing.展开更多
Daily, we experience the effects of audio noise, which contaminates the original information bearing signal with noise from its surrounding environment. This paper focuses on real-time hardware implementation of multi...Daily, we experience the effects of audio noise, which contaminates the original information bearing signal with noise from its surrounding environment. This paper focuses on real-time hardware implementation of multi-tap adaptive noise cancellation （ANC） system by using the least mean square （LMS） algorithm on TMS320C6713 to remove undesired noise from a received signal for various audio related applications. Three different experiments are carried out by considering different audio inputs to test the efficiency of the designed ANC system. The ＇C＇ code implementation of LMS algorithm is introduced and simulated in code composer studio （CCS）, then realized on the digital signal processor （DSP） C6713. The 300 Hz, 500 Hz, 800 Hz, 1 kHz and 3 kHz of tone signals and male speech signal are used as the reference inputs to trace the noise of signal until it is eliminated. The performance of ANC system is studied in terms of convergence speed, order of the filter and signal-to-noise ratio （SNR）. The experimentam results demonstrate that the designed system shows a consider- able improvement in SNR.展开更多
In order to improve the effectiveness of traditional time domain identification methods in identifying damping ratios, a new damping ratio identification method based on pattern search is proposed by fluctuating the r...In order to improve the effectiveness of traditional time domain identification methods in identifying damping ratios, a new damping ratio identification method based on pattern search is proposed by fluctuating the reliable natural frequency obtained through traditional time domain identification methods by about 10% to build the boundary conditions, using all the initial identification results to establish the free decay response of the system, and using the pattern search method to correct the initial identification results with the residual sum of squares between the free decay response and the actually measured free-decay signal as the objective function. The proposed method deals with the actually measured free-decay signal with curve fitting and avoids enlarging the identified error caused by intermediate conversion, so it can effectively improve the identified accuracy of damping ratios. Simulations for a room-sized vibration isolation foundation show that the relative errors of analyzed three damping ratios are down to 1.05%, 1.51% and 3.7% by the proposed method from 8.42%, 5.85% and 8.5% by STD method when the noise level is 10%.展开更多
In this paper, a quasi-Newton method fbr semi-blind estimation is derived for channel estimation in uplink cloud radio access networks （C-RANs）. Different from traditional pilot-aided estimation, semiblind estimatio...In this paper, a quasi-Newton method fbr semi-blind estimation is derived for channel estimation in uplink cloud radio access networks （C-RANs）. Different from traditional pilot-aided estimation, semiblind estimation utilizes the unknown data symbols in addition to the known pilot symbols to estimate the channel. An initial channel state information （CSI） obtained by least-squared （LS） estimation is needed in semi-blind estimation. BFGS （Brayben, Fletcher, Goldfarb and Shanno） algorithm, which employs data as well as pilot symbols, estimates the CSI though solving the problem provided by maximum-likelihood （ML） principle. In addition, mean-square-error （MSE） used to evaluate the estimation performance can be further minimized with an optimal pilot design. Simulation results show that the semi-blind estimation achieves a significant improvement in terms of MSE performance over the conventional LS estimation by utilizing data symbols instead of increasing the number of pilot symbols, which demonstrates the estimation accuracy and spectral efficiency are both improved by semiblind estimation for C-RANs.展开更多
A minimum mean-squared error （MSE） beamforming algorithm employing the optimum fractional Fourier transform （Opt-FrFT） domain second-order cyclostationarity is proposed. This method can efficiently filter out the ...A minimum mean-squared error （MSE） beamforming algorithm employing the optimum fractional Fourier transform （Opt-FrFT） domain second-order cyclostationarity is proposed. This method can efficiently filter out the compact desired chirp signal, with a consequence that the cyclically uncorrelated interferences and stationary （colored） Gaussian noise are greatly suppressed in the Opt- FrFT domain. This improves the MSE minimization cyclic beamformer by reducing effectively the Opt-FrFY domain signal-noise cross terms in the presence of finite data length de-correlation operation. Simulation results show that the new method works well under a wide range of signal-to-noise ratio （SNR） and signal-to-interference ratio （SIR）.展开更多
文摘针对滚动轴承微弱故障特征信息易受噪声干扰提取困难的问题,提出一种新的滚动轴承故障特征提取方法,即协方差矩阵(covariance matrix,CM)、奇异值差分谱(singular value difference spectrum,SVDS)和奇异值中值分解(singular value median decomposition,SVMD)相结合。首先,考虑到旋转机械的故障特征,对轴承故障信号采用1步长方法构造Hankel矩阵;其次,考虑到信号的协方差矩阵对于信号自相关去噪的优势,进而计算Hankel的协方差矩阵并进行空间重构;再次,采用奇异值差分谱方法对重构后的协方差矩阵信号进行分解处理而实现初步降噪,通过奇异值中值分解方法对其进行分解和筛选处理而完成二次降噪,并根据处理后信号的频谱包络,实现轴承故障特征信息的提取;最后,通过滚动轴承仿真数据分析得出,所提方法能够有效提取出噪声信号的故障特征及其谐波,实现不同轴承故障类型特征的有效提取,为滚动轴承故障复杂信号处理和诊断提供了一种新的方法和途径。
基金Project(60904090) supported by the National Natural Science Foundation of China
文摘In low earth orbit (LEO) satellite or missile communication scenarios, signals may experience extremely large Doppler shifts and have short visual time. Thus, direct sequence spread spectrum (DSSS) systems should be able to achieve acquisition in a very short time in spite of large Doppler frequencies. However, the traditional methods cannot solve it well. This work describes a new method that uses a differential decoding technique for Doppler mitigation and a batch process of FFT (fast Fourier transform) and IFFT (invert FFT) for the purpose of parallel code phase search by frequency domain correlation. After the code phase is estimated, another FFT process is carried out to search the Doppler frequency. Since both code phase and Doppler frequency domains are searched in parallel, this architecture can provide acquisition fifty times faster than conventional FFT methods. The performance in terms of the probability of detection and false alarm are also analyzed and simulated, showing that a signal-to-noise ratio (SNR) loss of 3 dB is introduced by the differential decoding. The proposed method is an efficient way to shorten the acquisition time with slightly hardware increasing.
文摘Daily, we experience the effects of audio noise, which contaminates the original information bearing signal with noise from its surrounding environment. This paper focuses on real-time hardware implementation of multi-tap adaptive noise cancellation （ANC） system by using the least mean square （LMS） algorithm on TMS320C6713 to remove undesired noise from a received signal for various audio related applications. Three different experiments are carried out by considering different audio inputs to test the efficiency of the designed ANC system. The ＇C＇ code implementation of LMS algorithm is introduced and simulated in code composer studio （CCS）, then realized on the digital signal processor （DSP） C6713. The 300 Hz, 500 Hz, 800 Hz, 1 kHz and 3 kHz of tone signals and male speech signal are used as the reference inputs to trace the noise of signal until it is eliminated. The performance of ANC system is studied in terms of convergence speed, order of the filter and signal-to-noise ratio （SNR）. The experimentam results demonstrate that the designed system shows a consider- able improvement in SNR.
基金Sponsored by the National Natural Science Foundation of China (Grant No.50675052)
文摘In order to improve the effectiveness of traditional time domain identification methods in identifying damping ratios, a new damping ratio identification method based on pattern search is proposed by fluctuating the reliable natural frequency obtained through traditional time domain identification methods by about 10% to build the boundary conditions, using all the initial identification results to establish the free decay response of the system, and using the pattern search method to correct the initial identification results with the residual sum of squares between the free decay response and the actually measured free-decay signal as the objective function. The proposed method deals with the actually measured free-decay signal with curve fitting and avoids enlarging the identified error caused by intermediate conversion, so it can effectively improve the identified accuracy of damping ratios. Simulations for a room-sized vibration isolation foundation show that the relative errors of analyzed three damping ratios are down to 1.05%, 1.51% and 3.7% by the proposed method from 8.42%, 5.85% and 8.5% by STD method when the noise level is 10%.
基金supported in part by the the National High Technology Research and Devel-opment Program of China(Grant No.2014AA01A701)National Natural Science Foundation of China(Grant No.61361166005)+2 种基金the State Major Science and Technology Special Projects(Grant No.2016ZX03001020006)the National Program for Support of Top-notch Young Pro-fessionalsthe Science and Technology Development Project of Beijing Municipal Education Commission of China(Grant No.KZ201511232036)
文摘In this paper, a quasi-Newton method fbr semi-blind estimation is derived for channel estimation in uplink cloud radio access networks （C-RANs）. Different from traditional pilot-aided estimation, semiblind estimation utilizes the unknown data symbols in addition to the known pilot symbols to estimate the channel. An initial channel state information （CSI） obtained by least-squared （LS） estimation is needed in semi-blind estimation. BFGS （Brayben, Fletcher, Goldfarb and Shanno） algorithm, which employs data as well as pilot symbols, estimates the CSI though solving the problem provided by maximum-likelihood （ML） principle. In addition, mean-square-error （MSE） used to evaluate the estimation performance can be further minimized with an optimal pilot design. Simulation results show that the semi-blind estimation achieves a significant improvement in terms of MSE performance over the conventional LS estimation by utilizing data symbols instead of increasing the number of pilot symbols, which demonstrates the estimation accuracy and spectral efficiency are both improved by semiblind estimation for C-RANs.
基金Supported by the National Natural Science Foundation of China （ No. 60672084, 60602037, 60736006）.
文摘A minimum mean-squared error （MSE） beamforming algorithm employing the optimum fractional Fourier transform （Opt-FrFT） domain second-order cyclostationarity is proposed. This method can efficiently filter out the compact desired chirp signal, with a consequence that the cyclically uncorrelated interferences and stationary （colored） Gaussian noise are greatly suppressed in the Opt- FrFT domain. This improves the MSE minimization cyclic beamformer by reducing effectively the Opt-FrFY domain signal-noise cross terms in the presence of finite data length de-correlation operation. Simulation results show that the new method works well under a wide range of signal-to-noise ratio （SNR） and signal-to-interference ratio （SIR）.
