Non-destructive measurement of absolute stress in steel members can provide useful information to optimize the design of steel structures and allow the safety of existing structures to be evaluated.This paper investig...Non-destructive measurement of absolute stress in steel members can provide useful information to optimize the design of steel structures and allow the safety of existing structures to be evaluated.This paper investigates the non-destructive capability of ultrasonic shear-wave spectroscopy in absolute stress evaluation of steel members.The effect of steel-member stress on the shear-wave amplitude spectrum is investigated,and a method of absolute stress measurement is proposed.Specifically,the process for evaluating absolute stress using shear-wave spectroscopy is summarized.Two steel members are employed to investigate the relationship between the stress and the frequency in shear-wave echo amplitude spectrum.The H-beam loaded by the universal testing machine is evaluated by the proposed method and the traditional strain gauge method for verification.The results show that the proposed method is effective and accurate for determining absolute stress in steel members.展开更多
In order to research the characteristic and mechanism of fracture of rock-like materials,the morphology of rock fracture surface under the breakages of uniaxial compression and triaxial compression was observed and me...In order to research the characteristic and mechanism of fracture of rock-like materials,the morphology of rock fracture surface under the breakages of uniaxial compression and triaxial compression was observed and measured by means of a new-type 3D laser scanning system.Based on geographic information system(GIS)technique,the fracture surfaces were 3D visualized and reestablished.According to GIS 3D statistics,the geometrical characteristics of fracture surfaces under different breakage conditions were analyzed,and then based on fractal theory,the change laws of fractal dimension of fracture surfaces were discussed under the conditions of different cell pressures and initial water contents of rock.Furthermore,the relationships between characteristics of fracture surface and mechanical properties of rock were discussed.The results indicate that cell pressure,initial water content,and mechanical parameters of rock are the important factors to influence on the geometrical characteristics of fracture surface.The research provides a new experimental method for quantitative study on the fracture characteristics of various materials under different breakage conditions.展开更多
The wide application of new information and communication technologies(ICTs) has been argued to be critical to business success of small and medium-sized enterprises(SMEs) ,especially to those in the developing countr...The wide application of new information and communication technologies(ICTs) has been argued to be critical to business success of small and medium-sized enterprises(SMEs) ,especially to those in the developing countries.Drawing upon existing literature,this article will examine the determinants of ICTs application in SMEs in China based on data collected from interviews with top managers and/or owners of 70 SMEs.We identify 20 factors affecting ICTs application in SMEs in China and divide them into four broad categories,namely pressures,firm specific factors,technical factors and local milieu.We also pay special attention to the Chinese business environment affecting ICTs application.Our analysis shows that local ICT infrastructure,external pressures from competitors and ICT knowledge of employees are the determinants of Internet application by SMEs,while product characteristics and market target are important factors of e-commerce adoption.展开更多
Hybrid organic-inorganic polymer nanocomposites incorporating organically modified montmorillonite (MMT) and ultra-high molecular weight polyethylene (UHMWPE) were examined. UHMWPE/MMT hybrid nanocomposites were prepa...Hybrid organic-inorganic polymer nanocomposites incorporating organically modified montmorillonite (MMT) and ultra-high molecular weight polyethylene (UHMWPE) were examined. UHMWPE/MMT hybrid nanocomposites were prepared using gel and pressure-induced flow(PIF) processing methods at a gel weight concentration of 8% UHMWPE with various organoclay contents (0, 0.4, 0.8, 1.2, and 1.6 parts per hundred parts). The interlayer properties of the nanocomposites were studied by transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The thermal and mechanical interfacial properties of the nanocomposites were investigated through thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and the use of a universal test machine (UTM). TEM indicates that the nanocomposites are formed upon dispersion of MMT in the polymer matrix. From the DSC, TGA, and DMA results, we find that the thermal stability of the UHMWPE nanocomposites increases as the MMT content increases. The nanocomposites show higher tensile strengths than pure UHMWPE gel sheet. These findings indicate that the interfacial and mechanical properties are improved by the addition of MMT and PIF processing.展开更多
基金supported by the National Key Research and Development Program of China (No. 2016YFC0701102)the National Nature Science Foundation of China(No.51538003)the Shenzhen Technology Innovation Program (No.JSGG20150330103937411)
文摘Non-destructive measurement of absolute stress in steel members can provide useful information to optimize the design of steel structures and allow the safety of existing structures to be evaluated.This paper investigates the non-destructive capability of ultrasonic shear-wave spectroscopy in absolute stress evaluation of steel members.The effect of steel-member stress on the shear-wave amplitude spectrum is investigated,and a method of absolute stress measurement is proposed.Specifically,the process for evaluating absolute stress using shear-wave spectroscopy is summarized.Two steel members are employed to investigate the relationship between the stress and the frequency in shear-wave echo amplitude spectrum.The H-beam loaded by the universal testing machine is evaluated by the proposed method and the traditional strain gauge method for verification.The results show that the proposed method is effective and accurate for determining absolute stress in steel members.
文摘In order to research the characteristic and mechanism of fracture of rock-like materials,the morphology of rock fracture surface under the breakages of uniaxial compression and triaxial compression was observed and measured by means of a new-type 3D laser scanning system.Based on geographic information system(GIS)technique,the fracture surfaces were 3D visualized and reestablished.According to GIS 3D statistics,the geometrical characteristics of fracture surfaces under different breakage conditions were analyzed,and then based on fractal theory,the change laws of fractal dimension of fracture surfaces were discussed under the conditions of different cell pressures and initial water contents of rock.Furthermore,the relationships between characteristics of fracture surface and mechanical properties of rock were discussed.The results indicate that cell pressure,initial water content,and mechanical parameters of rock are the important factors to influence on the geometrical characteristics of fracture surface.The research provides a new experimental method for quantitative study on the fracture characteristics of various materials under different breakage conditions.
基金the financial support from the National Natural Science Foundation of China for the research conducted (Grant no.40571047)
文摘The wide application of new information and communication technologies(ICTs) has been argued to be critical to business success of small and medium-sized enterprises(SMEs) ,especially to those in the developing countries.Drawing upon existing literature,this article will examine the determinants of ICTs application in SMEs in China based on data collected from interviews with top managers and/or owners of 70 SMEs.We identify 20 factors affecting ICTs application in SMEs in China and divide them into four broad categories,namely pressures,firm specific factors,technical factors and local milieu.We also pay special attention to the Chinese business environment affecting ICTs application.Our analysis shows that local ICT infrastructure,external pressures from competitors and ICT knowledge of employees are the determinants of Internet application by SMEs,while product characteristics and market target are important factors of e-commerce adoption.
基金National Natural Science Foundations of China (No. 50833002, No. 20774018)
文摘Hybrid organic-inorganic polymer nanocomposites incorporating organically modified montmorillonite (MMT) and ultra-high molecular weight polyethylene (UHMWPE) were examined. UHMWPE/MMT hybrid nanocomposites were prepared using gel and pressure-induced flow(PIF) processing methods at a gel weight concentration of 8% UHMWPE with various organoclay contents (0, 0.4, 0.8, 1.2, and 1.6 parts per hundred parts). The interlayer properties of the nanocomposites were studied by transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The thermal and mechanical interfacial properties of the nanocomposites were investigated through thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and the use of a universal test machine (UTM). TEM indicates that the nanocomposites are formed upon dispersion of MMT in the polymer matrix. From the DSC, TGA, and DMA results, we find that the thermal stability of the UHMWPE nanocomposites increases as the MMT content increases. The nanocomposites show higher tensile strengths than pure UHMWPE gel sheet. These findings indicate that the interfacial and mechanical properties are improved by the addition of MMT and PIF processing.
