Multi-source information fusion （MSIF） is imported into structural damage diagnosis methods to improve the validity of damage detection. After the introduction of the basic theory, the function model, classification...Multi-source information fusion （MSIF） is imported into structural damage diagnosis methods to improve the validity of damage detection. After the introduction of the basic theory, the function model, classifications and mathematical methods of MSIF, a structural damage detection method based on MSIF is presented, which is to fuse two or more damage character vectors from different structural damage diagnosis methods on the character-level. In an experiment of concrete plates, modal information is measured and analyzed. The structural damage detection method based on MSIF is taken to localize cracks of concrete plates and it is proved to be effective. Results of damage detection by the method based on MSIF are compared with those from the modal strain energy method and the flexibility method. Damage, which can hardly be detected by using the single damage identification method, can be diagnosed by the damage detection method based on the character-level MSIF technique. Meanwhile multi-location damage can be identified by the method based on MSIF. This method is sensitive to structural damage and different mathematical methods for MSIF have different preconditions and applicabilities for diversified structures. How to choose mathematical methods for MSIF should be discussed in detail in health monitoring systems of actual structures.展开更多
Obtaining comprehensive and accurate information is very important in intelligent tragic system （ITS）. In ITS, the GPS floating car system is an important approach for traffic data acquisition. However, in this syst...Obtaining comprehensive and accurate information is very important in intelligent tragic system （ITS）. In ITS, the GPS floating car system is an important approach for traffic data acquisition. However, in this system, the GPS blind areas caused by tall buildings or tunnels could affect the acquisition of tragic information and depress the system performance. Aiming at this problem, a novel method employing a back propagation （BP） neural network is developed to estimate the traffic speed in the GPS blind areas. When the speed of one road section is lost, the speed of its related road sections can be used to estimate its speed. The complete historical data of these road sections are used to train the neural network, using Levenberg-Marquardt learning algorithm. Then, the current speed of the related roads is used by the trained neural network to get the speed of the road section without GPS signal. We compare the speed of the road section estimated by our method with the real speed of this road section, and the experimental results show that the proposed method of traffic speed estimation is very effective.展开更多
To solve low precision and poor stability of the extended Kalman filter （EKF） in the vehicle integrated positioning system owing to acceleration, deceleration and turning （hereinafter referred to as maneuvering） ,...To solve low precision and poor stability of the extended Kalman filter （EKF） in the vehicle integrated positioning system owing to acceleration, deceleration and turning （hereinafter referred to as maneuvering） , the paper presents an adaptive filter algorithm that combines interacting multiple model （IMM） and non linear Kalman filter. The algorithm describes the motion mode of vehicle by using three state spacemode]s. At first, the parallel filter of each model is realized by using multiple nonlinear filters. Then the weight integration of filtering result is carried out by using the model matching likelihood function so as to get the system positioning information. The method has advantages of nonlinear system filter and overcomes disadvantages of single model of filtering algorithm that has poor effects on positioning the maneuvering target. At last, the paper uses IMM and EKF methods to simulate the global positioning system （OPS）/inertial navigation system （INS）/dead reckoning （DR） integrated positioning system, respectively. The results indicate that the IMM algorithm is obviously superior to EKF filter used in the integrated positioning system at present. Moreover, it can greatly enhance the stability and positioning precision of integrated positioning system.展开更多
Although evidence theory has been widely used in information fusion due to its effectiveness of uncertainty reasoning, the classical DS evidence theory involves counter-intuitive behaviors when high conflict informati...Although evidence theory has been widely used in information fusion due to its effectiveness of uncertainty reasoning, the classical DS evidence theory involves counter-intuitive behaviors when high conflict information exists. Many modification methods have been developed which can be classified into the following two kinds of ideas, either modifying the combination rules or modifying the evidence sources. In order to make the modification more reasonable and more effective, this paper gives a thorough analysis of some typical existing modification methods firstly, and then extracts the intrinsic feature of the evidence sources by using evidence distance theory. Based on the extracted features, two modified plans of evidence theory according to the corresponding modification ideas have been proposed. The results of numerical examples prove the good performance of the plans when combining evidence sources with high conflict information.展开更多
Towards the problems of existing detection methods,a novel real-time detection method(DMFIF) based on fractal and information fusion is proposed.It focuses on the intrinsic macroscopic characteristics of network,which...Towards the problems of existing detection methods,a novel real-time detection method(DMFIF) based on fractal and information fusion is proposed.It focuses on the intrinsic macroscopic characteristics of network,which reflect not the "unique" abnormalities of P2P botnets but the "common" abnormalities of them.It regards network traffic as the signal,and synthetically considers the macroscopic characteristics of network under different time scales with the fractal theory,including the self-similarity and the local singularity,which don't vary with the topology structures,the protocols and the attack types of P2P botnet.At first detect traffic abnormalities of the above characteristics with the nonparametric CUSUM algorithm,and achieve the final result by fusing the above detection results with the Dempster-Shafer evidence theory.Moreover,the side effect on detecting P2P botnet which web applications generated is considered.The experiments show that DMFIF can detect P2P botnet with a higher degree of precision.展开更多
This paper is a research on the characteristics of power big data. According to the characteristics of ＂large volume＂, ＂species diversity＂, ＂sparse value density＂, ＂fast speed＂ of the power big data, a predict...This paper is a research on the characteristics of power big data. According to the characteristics of ＂large volume＂, ＂species diversity＂, ＂sparse value density＂, ＂fast speed＂ of the power big data, a prediction model of multi-source information fusion for large data is established, the fusion prediction of various parameters of the same object is realized. A combined algorithm of Map Reduce and neural network is used in this paper. Using clustering and nonlinear mapping ability of neural network, it can effectively solve the problem of nonlinear objective function approximation, and neural network is applied to the prediction of fusion. In this paper, neural network model using multi layer feed forward network--BP neural network. Simultaneously, to achieve large-scale data sets in parallel computing, the parallelism and real-time property of the algorithm should be considered, further combined with Reduce Map model, to realize the parallel processing of the algorithm, making it more suitable for the study of the fusion of large data. And finally, through simulation, it verifies the feasibility of the proposed model and algorithm.展开更多
OBJECTIVE: To develop a more precise and accurate method, and identified a procedure to measure whether an acupoint had been correctly located.METHODS: On the face, we used an acupoint location from different acupunct...OBJECTIVE: To develop a more precise and accurate method, and identified a procedure to measure whether an acupoint had been correctly located.METHODS: On the face, we used an acupoint location from different acupuncture experts and obtained the most precise and accurate values of acupoint location based on the consistency information fusion algorithm, through a virtual simulation of the facial orientation coordinate system.RESULTS: Because of inconsistencies in each acupuncture expert's original data, the system error could not be modified using the characteristics ofthe general weight calculation. First, we corrected each expert of acupoint location system error itself,to obtain a rational quantification for each expert of acupuncture and moxibustion acupoint location consistent support degree, to obtain pointwise variable precision fusion results, to put every expert's acupuncture acupoint location fusion error enhanced to pointwise variable precision. Then, we more effectively used the measured characteristics of different acupuncture expert's acupoint location, to improve the measurement information utilization efficiency and acupuncture acupoint location precision and accuracy.CONCLUSION: Based on using the consistency matrix pointwise fusion method on the acupuncture experts' acupoint location values, each expert's acupoint location information could be calculated, and the most precise and accurate values of each expert's acupoint location could be obtained.展开更多
False monitoring information is a major problem in process production system and several ineffective methods have been proposed to identify false monitoring information in the production system. In this paper, a new m...False monitoring information is a major problem in process production system and several ineffective methods have been proposed to identify false monitoring information in the production system. In this paper, a new method is proposed to identify false monitoring information based on system coupling analysis and collision detection from the perspective of data analysis. Coupling multifractal features are extracted to reflect the changes in coupling relationship by utilizing the multifractal detrended cross-correlation analysis (MF-DXA). Each monitoring variable in process production system has more than one coupled variable, which can be regarded as multi-source. To achieve low redundancy in features and uniform description of coupling relationship, the feature level information fusion is studied based on modified Mahalanobis Taguchi system (MTS). False alarms are identified when the coupling relationships among the coupled monitoring variables collide. Analysis results of coupled R?ssler and Henon datasets indicate the feasibility of this method for selecting the effective coupling feature and uniform description of coupling relationship. The compressor system case of Coal Chemical Ltd. Group is studied and false monitoring information is identified.展开更多
基金The National High Technology Research and Develop-ment Program of China(863Program)(No.2006AA04Z416)the Na-tional Science Fund for Distinguished Young Scholars(No.50725828)the Excellent Dissertation Program for Doctoral Degree of Southeast University(No.0705)
文摘Multi-source information fusion （MSIF） is imported into structural damage diagnosis methods to improve the validity of damage detection. After the introduction of the basic theory, the function model, classifications and mathematical methods of MSIF, a structural damage detection method based on MSIF is presented, which is to fuse two or more damage character vectors from different structural damage diagnosis methods on the character-level. In an experiment of concrete plates, modal information is measured and analyzed. The structural damage detection method based on MSIF is taken to localize cracks of concrete plates and it is proved to be effective. Results of damage detection by the method based on MSIF are compared with those from the modal strain energy method and the flexibility method. Damage, which can hardly be detected by using the single damage identification method, can be diagnosed by the damage detection method based on the character-level MSIF technique. Meanwhile multi-location damage can be identified by the method based on MSIF. This method is sensitive to structural damage and different mathematical methods for MSIF have different preconditions and applicabilities for diversified structures. How to choose mathematical methods for MSIF should be discussed in detail in health monitoring systems of actual structures.
基金funded by National Key Technology R&D Program of China (No.2006BAG01A03)
文摘Obtaining comprehensive and accurate information is very important in intelligent tragic system （ITS）. In ITS, the GPS floating car system is an important approach for traffic data acquisition. However, in this system, the GPS blind areas caused by tall buildings or tunnels could affect the acquisition of tragic information and depress the system performance. Aiming at this problem, a novel method employing a back propagation （BP） neural network is developed to estimate the traffic speed in the GPS blind areas. When the speed of one road section is lost, the speed of its related road sections can be used to estimate its speed. The complete historical data of these road sections are used to train the neural network, using Levenberg-Marquardt learning algorithm. Then, the current speed of the related roads is used by the trained neural network to get the speed of the road section without GPS signal. We compare the speed of the road section estimated by our method with the real speed of this road section, and the experimental results show that the proposed method of traffic speed estimation is very effective.
基金National Natural Science Foundation of China(No.61663020)Project of Education Department of Gansu Province(No.2016B-036)
文摘To solve low precision and poor stability of the extended Kalman filter （EKF） in the vehicle integrated positioning system owing to acceleration, deceleration and turning （hereinafter referred to as maneuvering） , the paper presents an adaptive filter algorithm that combines interacting multiple model （IMM） and non linear Kalman filter. The algorithm describes the motion mode of vehicle by using three state spacemode]s. At first, the parallel filter of each model is realized by using multiple nonlinear filters. Then the weight integration of filtering result is carried out by using the model matching likelihood function so as to get the system positioning information. The method has advantages of nonlinear system filter and overcomes disadvantages of single model of filtering algorithm that has poor effects on positioning the maneuvering target. At last, the paper uses IMM and EKF methods to simulate the global positioning system （OPS）/inertial navigation system （INS）/dead reckoning （DR） integrated positioning system, respectively. The results indicate that the IMM algorithm is obviously superior to EKF filter used in the integrated positioning system at present. Moreover, it can greatly enhance the stability and positioning precision of integrated positioning system.
文摘Although evidence theory has been widely used in information fusion due to its effectiveness of uncertainty reasoning, the classical DS evidence theory involves counter-intuitive behaviors when high conflict information exists. Many modification methods have been developed which can be classified into the following two kinds of ideas, either modifying the combination rules or modifying the evidence sources. In order to make the modification more reasonable and more effective, this paper gives a thorough analysis of some typical existing modification methods firstly, and then extracts the intrinsic feature of the evidence sources by using evidence distance theory. Based on the extracted features, two modified plans of evidence theory according to the corresponding modification ideas have been proposed. The results of numerical examples prove the good performance of the plans when combining evidence sources with high conflict information.
基金supported by National High Technical Research and Development Program of China(863 Program)under Grant No.2011AA7031024GNational Natural Science Foundation of China under Grant No.90204014
文摘Towards the problems of existing detection methods,a novel real-time detection method(DMFIF) based on fractal and information fusion is proposed.It focuses on the intrinsic macroscopic characteristics of network,which reflect not the "unique" abnormalities of P2P botnets but the "common" abnormalities of them.It regards network traffic as the signal,and synthetically considers the macroscopic characteristics of network under different time scales with the fractal theory,including the self-similarity and the local singularity,which don't vary with the topology structures,the protocols and the attack types of P2P botnet.At first detect traffic abnormalities of the above characteristics with the nonparametric CUSUM algorithm,and achieve the final result by fusing the above detection results with the Dempster-Shafer evidence theory.Moreover,the side effect on detecting P2P botnet which web applications generated is considered.The experiments show that DMFIF can detect P2P botnet with a higher degree of precision.
文摘This paper is a research on the characteristics of power big data. According to the characteristics of ＂large volume＂, ＂species diversity＂, ＂sparse value density＂, ＂fast speed＂ of the power big data, a prediction model of multi-source information fusion for large data is established, the fusion prediction of various parameters of the same object is realized. A combined algorithm of Map Reduce and neural network is used in this paper. Using clustering and nonlinear mapping ability of neural network, it can effectively solve the problem of nonlinear objective function approximation, and neural network is applied to the prediction of fusion. In this paper, neural network model using multi layer feed forward network--BP neural network. Simultaneously, to achieve large-scale data sets in parallel computing, the parallelism and real-time property of the algorithm should be considered, further combined with Reduce Map model, to realize the parallel processing of the algorithm, making it more suitable for the study of the fusion of large data. And finally, through simulation, it verifies the feasibility of the proposed model and algorithm.
基金Supported by the Key Program of State Administration of Traditional Chinese Medicine of China:the Science of Acupuncture and Moxibustion(No.ZYSNXD-CC-ZDXK-07)
文摘OBJECTIVE: To develop a more precise and accurate method, and identified a procedure to measure whether an acupoint had been correctly located.METHODS: On the face, we used an acupoint location from different acupuncture experts and obtained the most precise and accurate values of acupoint location based on the consistency information fusion algorithm, through a virtual simulation of the facial orientation coordinate system.RESULTS: Because of inconsistencies in each acupuncture expert's original data, the system error could not be modified using the characteristics ofthe general weight calculation. First, we corrected each expert of acupoint location system error itself,to obtain a rational quantification for each expert of acupuncture and moxibustion acupoint location consistent support degree, to obtain pointwise variable precision fusion results, to put every expert's acupuncture acupoint location fusion error enhanced to pointwise variable precision. Then, we more effectively used the measured characteristics of different acupuncture expert's acupoint location, to improve the measurement information utilization efficiency and acupuncture acupoint location precision and accuracy.CONCLUSION: Based on using the consistency matrix pointwise fusion method on the acupuncture experts' acupoint location values, each expert's acupoint location information could be calculated, and the most precise and accurate values of each expert's acupoint location could be obtained.
基金supported by the National Natural Science Foundation of China (Grant No. 51375375)
文摘False monitoring information is a major problem in process production system and several ineffective methods have been proposed to identify false monitoring information in the production system. In this paper, a new method is proposed to identify false monitoring information based on system coupling analysis and collision detection from the perspective of data analysis. Coupling multifractal features are extracted to reflect the changes in coupling relationship by utilizing the multifractal detrended cross-correlation analysis (MF-DXA). Each monitoring variable in process production system has more than one coupled variable, which can be regarded as multi-source. To achieve low redundancy in features and uniform description of coupling relationship, the feature level information fusion is studied based on modified Mahalanobis Taguchi system (MTS). False alarms are identified when the coupling relationships among the coupled monitoring variables collide. Analysis results of coupled R?ssler and Henon datasets indicate the feasibility of this method for selecting the effective coupling feature and uniform description of coupling relationship. The compressor system case of Coal Chemical Ltd. Group is studied and false monitoring information is identified.
