Coding Scheme for Ka-Band Fixed Satellite Communication System

The performance analysis and simulation of coding schemes based on the modeling Ka band fixed satellite channel have been presented. The results indicate that concatenated codes with large inner interleaving depth have good performance and high spectrum efficiency. The studies also show that simple block interleaving is very effective in combating the slow frequency nonselective fading of Ka band.

A novel intra refresh scheme for wireless video transmission

The burst error of wireless channels and the two-state Markov wireless model are analyzed. Based on this model and the coding modes of the video encoder,the channel distortion of inter-coding and intra-coding due to burst error is deduced. Then we propose a novel intra refresh scheme in rate-distortion (R-D) framework. This scheme optimizes the error resilience and coding efficiency of wireless video transmission system. It can also stop error propagation and reduce channel distortion effectively. Simulations under different channel conditions verify the improvements of the proposed scheme with respect to error resilience for wireless video communication.

光伏阵列在不均匀光照下的输出特性仿真研究

文章以Matlab/Simulink为工具建立仿真模型,得到在不均匀光照下光伏阵列的输出特性。根据光伏发电的原理和光伏电池的内部结构,在simulink中搭建模型光伏阵列的模型。在不同的光照条件下,通过对模型的仿真得到I-U曲线和P-U曲线,根据仿真结果对输出特性进行总结并得出结论。

Typical Explosive Trains Analyzing and Computer Simulating

Through system analysis of typical explosive trains in various fuses, physical and correspondent mathematical models of typical explosive trains are established, based on mass conservation, momentum conservation, energy conservation and so on. MAZE and DYNA2D program is used to dispose these models and results of the simulating of elements of explosive trains in a typical fuse are obtained. It is helpful for designing fuses.

New Method for Solving GPS Deformation Monitoring Information at Single Epoch

Based on the analyses for the characteristics of high precise GPS defor-mation monitor,according to the spatial relationship among the satellite, base point and monitoring point a new model and its corresponding algorithm were presented to solve the monitoring point deformation directly at single epoch. In this method the carrier phases is used as the basic observations, and the initial condition is precise baseline vectors obtained in the first period observations between the base point and monitoring point. This model is called the similar single difference model (SSDM). The main error sources effecting the accuracy of deformations were analyzed briefly, the single epoch algorithm of the receiver clock offset was advanced. The numerical results of test data show that the SSDM and the single epoch algorithm of receiver clock offset advanced are reliable and correct.

Analyses of noncommensurate sampling used in high-precision regenerative pseudo-noise ranging systems

A high-precision pseudo-noise ranging system is often required in satellite-formation missions. But in an actual PN ranging system, digital signal processing limits the ranging accuracy, only level up with meter-scale. Using non-integer chip to sample time ratio, noncommensurate sampling was seen as an effective solution to cope with the drawback of digital effects. However, researchers only paid attention to selecting specific ratios or giving a simulation model to verify the effectiveness of the noncommensurate ratios. A qualitative analysis model is proposed to characterize the relationship between the range accuracy and the noncommensurate sampling parameters. Moreover, a method is also presented which can be used to choose the noncommensurate ratio and the correlation length to get higher phase delay distinguishability and lower range jitter. The simulation results indicate the correctness of our analyses and the optimal ranging accuracy can be up to centimeter-level with the proposed approach.

Microscopic dynamic simulation model for pedestrian at signalized intersection

Pedestrian's road-crossing model is the key part of micro-simulation for mixed traffic at signalized intersection.To reproduce the crossing behavior of pedestrians,the microscopic behaviors of the pedestrians passing through the crosswalk at signalized intersection were analyzed.A pedestrian's decision making model based on gap acceptance theory was proposed.Based on the field data at three typical intersections in Beijing,China,the critical gaps and lags of pedestrians were calibrated.In addition,considering pedestrian's required space,a modification of the social force model that consists of a self-deceleration mechanism prevents a simulated pedestrian from continuously pushing over other pedestrians,making the simulation more realistic.After the simple change,the modified social force model is able to reproduce the fundamental diagram of pedestrian flows for densities less than 3.5 m-2 as reported in the literature.

A Study on sEMG Simulation Modeling and Its Decomposition Methods

In this paper, we establish a surface electromyography(sEMG) signal model and study the signal decomposition method from noisy background. Firstly, single fiber action potential (SFAP), motor unit action potential (MUAP) and motor unit action potential train(MUAPT) are simulated based on the tripolar signal source model, and then the sEMG is obtained; secondly, the simulated sEMG signal is extracted from the mixed signals that consists of white noises, power frequency interference signal and electrocardio signal by independent component analysis (ICA) algorithms; lastly, the spikes corresponding to each motor unit action potential from the simulated sEMG signals were detected by applying the wavelet transform (WT) method. Simulation results showed that sEMG model could describe the physiological process of sEMG, ICA and WT methods could extract the sEMG signal and its features, which will lay a foundation for further classifying the MUAP.

Modeling and Doppler measurement of X-ray pulsar

Generally,the Doppler caused by the velocity of the detector leads to distortion of the integrated profile of the X-ray pulsar,on the contrary,if the distortion can be used to measure the Doppler,then the velocity of the detector is easy to be solved.In view of this,the correlation of the periodic error arise from the Doppler and the integrated profile was analyzed,then,based on the Poisson distribution model of the X-ray Pulsar,a new signal model and the concept of the profile entropy was defined.Furthermore,the directly cumulated profile of the signal was modeled with the Doppler as a parameter,and then the Doppler was solved via optimal method.Simultaneously,the performance of phase measurement based on this method was studded.The analysis shows that this method can get rid of the periodic error due to the discrete sampling,and can obtain continuous phase estimation.The experiment verification shows the consistency of the theory and the experiment.

Model of GPS IF Signal and Its Simulation

A GPS IF signal computer simulation method is proposed in this article. The carrier Doppler frequency and the total propagation and delay time can be modeled or calculated with the input GPS satellite ephemeris file. The simulated GPS IF signal outputs to a text file for post-processing and analysis. The simulation signal spectrum is compared with the received real GPS IF signal spectrum, and the correctness of the simulation result is verified.