Toppling failure of rock mass/soil slope is an important geological and environmental problem.Clarifying its failure mechanism under different conditions has great significance in engineering.The toppling failure of a...Toppling failure of rock mass/soil slope is an important geological and environmental problem.Clarifying its failure mechanism under different conditions has great significance in engineering.The toppling failure of a cutting slope occurred in a hydropower station in Kyushu,Japan illustrates that the joint characteristic played a significant role in the occurrence of rock slope tipping failure.Thus,in order to consider the mechanical properties of jointed rock mass and the influence of geometric conditions,a simplified analytical approach based on the limit equilibrium method for modeling the flexural toppling of cut rock slopes is proposed to consider the influence of the mechanical properties and geometry condition of jointed rock mass.The theoretical solution is compared with the numerical solution taking Kyushu Hydropower Station in Japan as one case,and it is found that the theoretical solution obtained by the simplified analysis method is consistent with the numerical analytical solution,thus verifying the accuracy of the simplified method.Meanwhile,the Goodman-Bray approach conventionally used in engineering practice is improved according to the analytical results.The results show that the allowable slope angle may be obtained by the improved Goodman-Bray approach considering the joint spacing,the joint frictional angle and the tensile strength of rock mass together.展开更多
The nexus between water, food and energy is one of the most fundamental relationships and challenges for society. Indeed, seepage of wastes stored into dumping sites of Edea township, favor their lixiviation. Soluble ...The nexus between water, food and energy is one of the most fundamental relationships and challenges for society. Indeed, seepage of wastes stored into dumping sites of Edea township, favor their lixiviation. Soluble components of matter are slowly dissolves, drained by meteoric water and flowed into tail bay vicinity. Knowledge of trace and toxic metal concentrations in the biotic matrices is important for assessing the effects of pollutants and the risk of exposure. In this study, A1, Mn, Cd, Cr, Cu, Pb and Zn were quantified respectively in 33 samples of soil and water, using ICP-MS （Inductively Coupled Plasma Mass Spectrometry）, Pb were found between 1.38-88.28 mg/L. Higher concentrations of Al were found in Alucam industrial wastes （315,502.33 mg/kg）, and in Hysacam domestic wastes （54,126.93 mg/kg）. Concentrations of Cd （1.955 mg/kg）, Pb （469.00 mg/kg） and Zn （853.00 rng/kg） are higher in domestic wastes. The ones of Mn （696.96 mg/kg） and Cu （1,320.10 mg/kg） are higher in industrial wastes. Higher concentrations of Pb and Cu let assume that it is a risk of poisoning relative to these elements around this area. These findings illustrate that lixiviation of dumping wastes has great influence on water and soils pollutions of the study ecosystem.展开更多
基金Project(52109132)supported by the National Natural Science Foundation of ChinaProject(ZR2020QE270)supported by the Natural Science Foundation of Shandong Province,China+1 种基金Project(JMDPC202204)supported by State Key Laboratory of Strata Intelligent Control,Green Mining Co-founded by Shandong Province and the Ministry of Science and TechnologyShandong University of Science and Technology,China。
文摘Toppling failure of rock mass/soil slope is an important geological and environmental problem.Clarifying its failure mechanism under different conditions has great significance in engineering.The toppling failure of a cutting slope occurred in a hydropower station in Kyushu,Japan illustrates that the joint characteristic played a significant role in the occurrence of rock slope tipping failure.Thus,in order to consider the mechanical properties of jointed rock mass and the influence of geometric conditions,a simplified analytical approach based on the limit equilibrium method for modeling the flexural toppling of cut rock slopes is proposed to consider the influence of the mechanical properties and geometry condition of jointed rock mass.The theoretical solution is compared with the numerical solution taking Kyushu Hydropower Station in Japan as one case,and it is found that the theoretical solution obtained by the simplified analysis method is consistent with the numerical analytical solution,thus verifying the accuracy of the simplified method.Meanwhile,the Goodman-Bray approach conventionally used in engineering practice is improved according to the analytical results.The results show that the allowable slope angle may be obtained by the improved Goodman-Bray approach considering the joint spacing,the joint frictional angle and the tensile strength of rock mass together.
文摘The nexus between water, food and energy is one of the most fundamental relationships and challenges for society. Indeed, seepage of wastes stored into dumping sites of Edea township, favor their lixiviation. Soluble components of matter are slowly dissolves, drained by meteoric water and flowed into tail bay vicinity. Knowledge of trace and toxic metal concentrations in the biotic matrices is important for assessing the effects of pollutants and the risk of exposure. In this study, A1, Mn, Cd, Cr, Cu, Pb and Zn were quantified respectively in 33 samples of soil and water, using ICP-MS （Inductively Coupled Plasma Mass Spectrometry）, Pb were found between 1.38-88.28 mg/L. Higher concentrations of Al were found in Alucam industrial wastes （315,502.33 mg/kg）, and in Hysacam domestic wastes （54,126.93 mg/kg）. Concentrations of Cd （1.955 mg/kg）, Pb （469.00 mg/kg） and Zn （853.00 rng/kg） are higher in domestic wastes. The ones of Mn （696.96 mg/kg） and Cu （1,320.10 mg/kg） are higher in industrial wastes. Higher concentrations of Pb and Cu let assume that it is a risk of poisoning relative to these elements around this area. These findings illustrate that lixiviation of dumping wastes has great influence on water and soils pollutions of the study ecosystem.
