The objective of this work was to investigate the possibility of taper angle correction in cutting of complex micro-mechanical contours using a TruMicro ultra-short pulse laser in combination with the SCANLAB precSYS ...The objective of this work was to investigate the possibility of taper angle correction in cutting of complex micro-mechanical contours using a TruMicro ultra-short pulse laser in combination with the SCANLAB precSYS micro machining sub system. In a first step, the influence of the process parameters on the kerftaper angle of metallic alloys was systematically investigated without beam inclination. A set of base parameters was derived for the subsequent investigations. In a second step, the kerftaper angle was controlled by static beam inclination. In a third step, the same optics was used in its dynamic precession mode to fabricate micro-mechanical components of complex contours with perpendicular 0~ taper angles. It was found that taper angle adjustments of up to 7.5~ are possible with the used setup for cutting applications. Taper angle control is possible both in the static beam inclination mode and in the dynamic precession mode. The static mode could be interesting for contours with sharp inner radii and for achieving faster cutting times similar to results with fixed optics, but would require excellent synchronization of beam inclination and axis motion. The dynamic precession mode would allow an easier integration of the optics into a laser machine but will result in longer cutting times and limitations with respect to achievable inner radii.展开更多
Paper deals about testing of device with gravity assisted heat pipes and about researching of wick heat pipes used to effective heat transfers from power switches of energy converter. At first, to simulate ambient con...Paper deals about testing of device with gravity assisted heat pipes and about researching of wick heat pipes used to effective heat transfers from power switches of energy converter. At first, to simulate ambient condition was designed thermostatic chamber where was monitoring temperature course on main parts of cooling device （energy converter, air cooler and heat pipes） at various position of cooling device. It was found, if the cooling device is in tilt position the cooling performance is better. But if the tilt angel of gravity assisted heat pipe is higher the heat transfer is lower. From reason improve heat transfer cooling device at tilt angle are manufactured heat pipes with the sintered, mesh screen and grooved capillary structures and tested their thermal performance at vertical and tilt angel 45~ position by calorimetric method. Article describes manufacturing process and thermal performance measuring method of wick heat pipes. This experiment testify that the wick heat pipe is able operate at tilt angle position than gravity assisted heat pipe and application of wick heat pipes into cooling device will improve his cooling performance.展开更多
In this paper, we study the kinematic mechanism and path planning for a two-caster nonholonomic vehicle (the Essboard) which is a recent variant of skateboard. Different from the most studied Snakeboard, the Essboard ...In this paper, we study the kinematic mechanism and path planning for a two-caster nonholonomic vehicle (the Essboard) which is a recent variant of skateboard. Different from the most studied Snakeboard, the Essboard consists of a torsion bar and two platforms, each of which contains a pedal and a caster. We first investigate the relationship between the tilt angles of the pedals and the wheel directions of the casters. This relationship reveals how to control the wheel directions by adjusting the tilt angles. Next, the rotational radius of the Essboard is derived for a given pair of tilt angles of both pedals. The rotational radius of the Essboard is much different than that of the Snakeboard. Then we develop a path-planning algorithm for the Essboard to move from a start position to the goal, using a series of consecutively connected arcs, which are tangent to each other at the connected points. It is shown from a kinematic point of view that the path planning of the Essboard can be solved by a series of pairs of pedals' tilt angles. Three experiments are conducted to confirm the correctness of the main results. The results in this paper are a foundation for further study of the Essboard.展开更多
China’s Western Development is a policy adopted to boost its less developed Western regions,that is,a systematic project and a longterm and arduous task.The development of compulsory education in China’s minority ar...China’s Western Development is a policy adopted to boost its less developed Western regions,that is,a systematic project and a longterm and arduous task.The development of compulsory education in China’s minority areas is the key to it.This paper attempts to use the beneficial experience of developing compulsory education support system of other countries for reference so as to explore financial support system suitable for the situation of China’s compulsory education in minority areas.展开更多
文摘The objective of this work was to investigate the possibility of taper angle correction in cutting of complex micro-mechanical contours using a TruMicro ultra-short pulse laser in combination with the SCANLAB precSYS micro machining sub system. In a first step, the influence of the process parameters on the kerftaper angle of metallic alloys was systematically investigated without beam inclination. A set of base parameters was derived for the subsequent investigations. In a second step, the kerftaper angle was controlled by static beam inclination. In a third step, the same optics was used in its dynamic precession mode to fabricate micro-mechanical components of complex contours with perpendicular 0~ taper angles. It was found that taper angle adjustments of up to 7.5~ are possible with the used setup for cutting applications. Taper angle control is possible both in the static beam inclination mode and in the dynamic precession mode. The static mode could be interesting for contours with sharp inner radii and for achieving faster cutting times similar to results with fixed optics, but would require excellent synchronization of beam inclination and axis motion. The dynamic precession mode would allow an easier integration of the optics into a laser machine but will result in longer cutting times and limitations with respect to achievable inner radii.
文摘Paper deals about testing of device with gravity assisted heat pipes and about researching of wick heat pipes used to effective heat transfers from power switches of energy converter. At first, to simulate ambient condition was designed thermostatic chamber where was monitoring temperature course on main parts of cooling device （energy converter, air cooler and heat pipes） at various position of cooling device. It was found, if the cooling device is in tilt position the cooling performance is better. But if the tilt angel of gravity assisted heat pipe is higher the heat transfer is lower. From reason improve heat transfer cooling device at tilt angle are manufactured heat pipes with the sintered, mesh screen and grooved capillary structures and tested their thermal performance at vertical and tilt angel 45~ position by calorimetric method. Article describes manufacturing process and thermal performance measuring method of wick heat pipes. This experiment testify that the wick heat pipe is able operate at tilt angle position than gravity assisted heat pipe and application of wick heat pipes into cooling device will improve his cooling performance.
基金supported by the National Natural Science Foundation of China (Grant Nos. 51105012 and 61175079)
文摘In this paper, we study the kinematic mechanism and path planning for a two-caster nonholonomic vehicle (the Essboard) which is a recent variant of skateboard. Different from the most studied Snakeboard, the Essboard consists of a torsion bar and two platforms, each of which contains a pedal and a caster. We first investigate the relationship between the tilt angles of the pedals and the wheel directions of the casters. This relationship reveals how to control the wheel directions by adjusting the tilt angles. Next, the rotational radius of the Essboard is derived for a given pair of tilt angles of both pedals. The rotational radius of the Essboard is much different than that of the Snakeboard. Then we develop a path-planning algorithm for the Essboard to move from a start position to the goal, using a series of consecutively connected arcs, which are tangent to each other at the connected points. It is shown from a kinematic point of view that the path planning of the Essboard can be solved by a series of pairs of pedals' tilt angles. Three experiments are conducted to confirm the correctness of the main results. The results in this paper are a foundation for further study of the Essboard.
文摘China’s Western Development is a policy adopted to boost its less developed Western regions,that is,a systematic project and a longterm and arduous task.The development of compulsory education in China’s minority areas is the key to it.This paper attempts to use the beneficial experience of developing compulsory education support system of other countries for reference so as to explore financial support system suitable for the situation of China’s compulsory education in minority areas.
