富芳烃油馏分组成对中间相沥青形成的影响

中间相沥青是制备新型碳材料的优良前躯体,其品质与原料的结构性质密切相关。采用减压蒸馏工艺对富芳烃油进行馏分切割预处理,得到不同结构组成的馏分油,分别进行热处理制备中间相沥青。对原料的相对分子质量及分子结构进行表征,并采用偏光显微镜、傅里叶变换红外光谱、热重、X射线衍射等研究手段对产品的微观结构、分子结构和微晶结构进行分析,探讨原料相对分子质量及分子结构对中间相沥青形成与发展的影响。结果表明:原料结构组成是影响中间相品质的重要因素,相对分子质量分布窄、环烷结构含量高的原料有利于形成各向异性结构含量高、软化点低、微晶结构有序的中间相沥青。

Numerical investigation of effect of eccentric decoupled charge structure on blasting-induced rock damage

Eccentric decoupling blasting is commonly used in underground excavation.Determination of perimeter hole parameters(such as the blasthole diameter,spacing,and burden)based on an eccentric charge structure is vital for achieving an excellent smooth blasting effect.In this paper,the Riedel-Hiermaier-Thoma(RHT)model was employed to study rock mass damage under smooth blasting.Firstly,the parameters of the RHT model were calibrated by using the existing SHPB experiment,which were then verified by the existing blasting experiment results.Secondly,the influence of different charge structures on the blasting effect was investigated using the RHT model.The simulation results indicated that eccentric charge blasting has an obvious pressure eccentricity effect.Finally,to improve the blasting effect,the smooth blasting parameters were optimized based on an eccentric charge structure.The overbreak and underbreak phenomena were effectively controlled,and a good blasting effect was achieved with the optimized blasting parameters.

Design and Optimization of a novel structure for efficient side-coupling of high power double-cladding fiber lasers

A novel structure for efficient side-coupling of high power double-cladding fiber lasers is presented. The maximum cou- pling efficiency of this structure is more than 90% for TM-polarization in the +1 and -1 order but is only 40% for TE- polarization. Thus, a multi-layer stair-structure is introduced and optimized by combining transmission algorithm and genetic algorithm to obtain higher coupling efficiencyηfor TE-polarization and the maximum coupling efficiency almost reaches to 70%.

Biogenic characteristics of Mesozoic cherts in southern Tibet and its significance

The Xialu chert, which contains abundant biological information, were investigated by major element analysis, micro-Raman, SEM and EPMA. The results show that SiO2 content of chert is 84.12%-93.08%, averaging 89.84%. The close packed structures of low degree crystallinity of quartz indicate the hydrothermal origin. SiO2 of modern hot springs exhibit loose silica pellets and nodular, beaded structures. Under polarization microscope, the presence of biological skeleton structures indicate that biological activities are involved in the hydrothermal deposition, which correspond to the geochemical characteristics: w(SiO2)/ w(K2O+Na2O), w(SiO2)/w(Al2O3) and w(SiO2)/w(MgO), with average values of 295.29, 68.88 and 284.45, respectively. SiO2 is enriched in the organism(radiolarian) centers, the degree order of SiO2 within the biologic structures is much higher than that of outside. The impurity minerals albites are formed earlier than the original deposition. Kaolinites, feldspars and mixture of organic materials display lower degree of crystallinities and accumulate as vermicular aggregates.

Strain-induced direct-indirect bandgap transition and phonon modulation in monolayer WS2

In situ strain photoluminescence （PL） and Raman spectroscopy have been employed to exploit the evolutions of the electronic band structure and lattice vibrational responses of chemical vapor deposition （CVD）-grown monolayer tungsten disulphide （WS2） under uniaxial tensile strain. Observable broadening and appearance of an extra small feature at the longer-wavelength side shoulder of the PL peak occur under 2.5% strain, which could indicate the direct-indirect bandgap transition and is further confirmed by our density-functional-theory calculations. As the strain increases further, the spectral weight of the indirect transition gradually increases. Over the entire strain range, with the increase of the strain, the light emissions corresponding to each optical transition, such as the direct bandgap transition （K-K） and indirect bandgap transition （F-K, ≥2.5%）, exhibit a monotonous linear redshift. In addition, the binding energy of the indirect transition is found to be larger than that of the direct transition, and the slight lowering of the trion dissociation energy with increasing strain is observed. The strain was used to modulate not only the electronic band structure but also the lattice vibrations. The softening and splitting of the in-plane E＇ mode is observed under uniaxial tensile strain, and polarization-dependent Raman spectroscopy confirms the observed zigzag-oriented edge of WS2 grown by CVD in previous studies. These findings enrich our understanding of the strained states of monolayer transition-metal dichalcogenide （TMD） materials and lay a foundation for developing applications exploiting their strain-dependent optical properties, including the strain detection and light-emission modulation of such emerging two-dimensional TMDs.

Single-polarization photonic crystal fibers with a multiplex structure

A new kind of single-polarization photonic crystal fiber(PCF) is proposed.Two kinds of multi-component glasses and the air are selected as working materials.Through using the full vector finite element method(FEM) and the perfectly matched layers(PML),the polarization-maintaining characteristic and the confinement loss of the fiber are analyzed,respectively.In addition,the single-polarization region of the fiber around 1.55 ìm is discussed.Numerical simulations show that the fiber maintains single-polarization operation within the wavelength range of 1.421-1.696μm.The birefringence can reach 6.988×10-3,and the confinement loss is as low as 0.012 dB/m when 7 layers of ring holes are arranged in the cladding at λ=1.55μm.