Fracture identification is important for the evaluation of carbonate reservoirs. However, conventional logging equipment has small depth of investigation and cannot detect rock fractures more than three meters away fr...Fracture identification is important for the evaluation of carbonate reservoirs. However, conventional logging equipment has small depth of investigation and cannot detect rock fractures more than three meters away from the borehole. Remote acoustic logging uses phase-controlled array-transmitting and long sound probes that increase the depth of investigation. The interpretation of logging data with respect to fractures is typically guided by practical experience rather than theory and is often ambiguous. We use remote acoustic reflection logging data and high-order finite-difference approximations in the forward modeling and prestack reverse-time migration to image fractures. First, we perform forward modeling of the fracture responses as a function of the fracture-borehole wall distance, aperture, and dip angle. Second, we extract the energy intensity within the imaging area to determine whether the fracture can be identified as the formation velocity is varied. Finally, we evaluate the effect of the fracture-borehole distance, fracture aperture, and dip angle on fracture identification.展开更多
Based on micro-displacement measurement principles of the spherical differential capacitance sensor, the relationship between the capacitance variation and the micro-displacement of each pair of detecting electrodes f...Based on micro-displacement measurement principles of the spherical differential capacitance sensor, the relationship between the capacitance variation and the micro-displacement of each pair of detecting electrodes for the superconducting gyroscope （SCG） with eight detecting electrodes is analyzed. The model of the SCG rotor drift is established through dimensionless processing, linearization within micro-displacement and the least-square approach. Both the measurement scheme of the SCG rotor drift based on the model and its parameter relationship are presented. To guarantee the potential of the suspension rotor to be zero, the distributing scheme of four pairs of detecting electrodes is presented. The scheme can measure the magnitude and the direction of the rotor drift. The negative factors for affecting the measurement precision of .the SCG rotor drift and simulation results of the total effects are given. Simulation results show that the distributing capacitance of these differential capacitance sensors, the zero potential of the rotor and the model error are the major negative factors. The methods for eliminating those negative factors and the application range of the model are given. The model ensures the relationship between the output voltage and the rotor drift be linear.展开更多
Generally, FD coefficients can be obtained by using Taylor series expansion （TE） or optimization methods to minimize the dispersion error. However, the TE-based FD method only achieves high modeling precision over a...Generally, FD coefficients can be obtained by using Taylor series expansion （TE） or optimization methods to minimize the dispersion error. However, the TE-based FD method only achieves high modeling precision over a limited range of wavenumbers, and produces large numerical dispersion beyond this range. The optimal FD scheme based on least squares （LS） can guarantee high precision over a larger range of wavenumbers and obtain the best optimization solution at small computational cost. We extend the LS-based optimal FD scheme from two-dimensional （2D） forward modeling to three-dimensional （3D） and develop a 3D acoustic optimal FD method with high efficiency, wide range of high accuracy and adaptability to parallel computing. Dispersion analysis and forward modeling demonstrate that the developed FD method suppresses numerical dispersion. Finally, we use the developed FD method to source wavefield extrapolation and receiver wavefield extrapolation in 3D RTM. To decrease the computation time and storage requirements, the 3D RTM is implemented by combining the efficient boundary storage with checkpointing strategies on GPU. 3D RTM imaging results suggest that the 3D optimal FD method has higher precision than conventional methods.展开更多
To determine the feasibility and practicability of interrupt continuous wave (CW) approach proposed for real time simulating radar intermediate frequency(IF) video signal, theoretical analysis and computer simulation...To determine the feasibility and practicability of interrupt continuous wave (CW) approach proposed for real time simulating radar intermediate frequency(IF) video signal, theoretical analysis and computer simulation were used. Phases at two linked points between the end and beginning of adjoined frames are always consistent; the bias Doppler frequency for the time delay of A/D sampling start responds to that for target acceleration. No digital phase compensation is required at continuous points, and the interrupt CW approach has apparently practical values.展开更多
基金supported by National Petroleum Major Project(Grant No.2011ZX05020-008)
文摘Fracture identification is important for the evaluation of carbonate reservoirs. However, conventional logging equipment has small depth of investigation and cannot detect rock fractures more than three meters away from the borehole. Remote acoustic logging uses phase-controlled array-transmitting and long sound probes that increase the depth of investigation. The interpretation of logging data with respect to fractures is typically guided by practical experience rather than theory and is often ambiguous. We use remote acoustic reflection logging data and high-order finite-difference approximations in the forward modeling and prestack reverse-time migration to image fractures. First, we perform forward modeling of the fracture responses as a function of the fracture-borehole wall distance, aperture, and dip angle. Second, we extract the energy intensity within the imaging area to determine whether the fracture can be identified as the formation velocity is varied. Finally, we evaluate the effect of the fracture-borehole distance, fracture aperture, and dip angle on fracture identification.
文摘Based on micro-displacement measurement principles of the spherical differential capacitance sensor, the relationship between the capacitance variation and the micro-displacement of each pair of detecting electrodes for the superconducting gyroscope （SCG） with eight detecting electrodes is analyzed. The model of the SCG rotor drift is established through dimensionless processing, linearization within micro-displacement and the least-square approach. Both the measurement scheme of the SCG rotor drift based on the model and its parameter relationship are presented. To guarantee the potential of the suspension rotor to be zero, the distributing scheme of four pairs of detecting electrodes is presented. The scheme can measure the magnitude and the direction of the rotor drift. The negative factors for affecting the measurement precision of .the SCG rotor drift and simulation results of the total effects are given. Simulation results show that the distributing capacitance of these differential capacitance sensors, the zero potential of the rotor and the model error are the major negative factors. The methods for eliminating those negative factors and the application range of the model are given. The model ensures the relationship between the output voltage and the rotor drift be linear.
基金supported by the National Natural Science Foundation of China(No.41474110)Shell Ph.D. Scholarship to support excellence in geophysical research
文摘Generally, FD coefficients can be obtained by using Taylor series expansion （TE） or optimization methods to minimize the dispersion error. However, the TE-based FD method only achieves high modeling precision over a limited range of wavenumbers, and produces large numerical dispersion beyond this range. The optimal FD scheme based on least squares （LS） can guarantee high precision over a larger range of wavenumbers and obtain the best optimization solution at small computational cost. We extend the LS-based optimal FD scheme from two-dimensional （2D） forward modeling to three-dimensional （3D） and develop a 3D acoustic optimal FD method with high efficiency, wide range of high accuracy and adaptability to parallel computing. Dispersion analysis and forward modeling demonstrate that the developed FD method suppresses numerical dispersion. Finally, we use the developed FD method to source wavefield extrapolation and receiver wavefield extrapolation in 3D RTM. To decrease the computation time and storage requirements, the 3D RTM is implemented by combining the efficient boundary storage with checkpointing strategies on GPU. 3D RTM imaging results suggest that the 3D optimal FD method has higher precision than conventional methods.
文摘To determine the feasibility and practicability of interrupt continuous wave (CW) approach proposed for real time simulating radar intermediate frequency(IF) video signal, theoretical analysis and computer simulation were used. Phases at two linked points between the end and beginning of adjoined frames are always consistent; the bias Doppler frequency for the time delay of A/D sampling start responds to that for target acceleration. No digital phase compensation is required at continuous points, and the interrupt CW approach has apparently practical values.
