Operating performance of novel reverse-cycle defrosting method based on thermal energy storage for air source heat pump

To solve the fundamental problem of insufficient heat available during defrosting while ensuring the efficient and safe system operation for air-source heat pumps (ASHPs). A novel reverse-cycle defrosting (NRCD) method based on thermal energy storage to eliminate frost off the outdoor coil surface was developed. Comparative experiments using both the stand reverse cycle defrosting (SRCD) method and the NRCD method were carried out on an experimental ASHP unit with a nominal 2.5 kW heating capacity. The results indicate that during defrosting operation, using the NRCD method improves discharge and suction pressures by 0.24 MPa and 0.19 MPa, respectively, shortens defrosting duration by 60%, and reduces the defrosting energy consumption by 48.1% in the experimental environment, compared with those by the use of SRCD method. Therefore, using the NRCD method can shorten the defrosting duration, improve the indoor thermal comfort, and reduce the defrosting energy consumption in defrosting.

H2 Production from Wind Power in a Wind Farm in Spain

A hydrogen production and conversion plant from wind power was installed in the Sotavento wind farm by Gas Natural and the Galician Government. This facility is the highest electrolysis power installed at the European level. It consists of an electrolyser of 300 kW, a piston compressor, a 1,725 Nm3 H2 storage system and an engine of 55 kW. This pilot plant is being operated by Natural Gas in order to extrapolate its behavior to that of an industrial facility capable of managing all the production of Sotavento wind farm following different strategies： balancing, peak-shaving and repowering. In this paper, preliminary results at the facility are presented. The aim of these first tests has been to describe the operation of equipment under operating conditions required in the management of wind power production, in order to understand the behavior of the different equipment and try to make them suitable for this type of applications. This paper shows the difficulty of operating these systems under the wind power requirements.

Non-destructive Testing Robots （NDTBOTs） for In-Service Storage Tank Inspection

Petrochemical storage tanks are generally inspected when the tank is offline mostly to assess the extent of underside corrosion on the tank floor. Emptying, cleaning and opening a tank for inspection take many months and are very expensive. Inspection costs can be reduced significantly by inserting robots through manholes on the tank roof to pertbrm non-destructive testing （NDT）. The challenge is to develop robots that can operate safely in explosive and hazardous environments and measure the thickness of floor plates using ultrasound sensors. This paper reports on the development of a small and inexpensive prototype robot （NDTBOT） which is designed to be intrinsically safe for zone zero operation. The robot ＂hops＂ across the floor to make measurements, without any external moving parts. The paper describes the design, experimental testing of the NDTBOT and presents results of steel plate thickness measurements made under water.

The development status and the prospect of the pipeline robots in the oil and gas storage and transportation industry

In the process of the constant development of the oil and gas storage and transportation technology, the maintenance of the large pipelines is an important task. At present, China vigorously promotes the use of the pipeline robots, for the maintenance of the oil and gas pipelines by the unique characteristics of the robots. In this paper, the author carries out the detailed analysis on the current situation of the development of the pipeline robots in the oil and gas storage and transportation industry, and compares the different applications of the pipeline robots at home and abroad. Starting from the principles of the operation of the robots, the author analyzes the characteristics of the different types of the robots, and combined with the existing conditions of the oil and gas storage and transportation in our country, the author tries to find the most favorable way of the working of the pipeline robots, to continuously improve the development of the oil and gas storage and transportation industry using the robot technologies.

Effect of Cooking Method and Storage on the Quality of Minced Pork

Minced pork paste was mixed with cooked rice and noodle resulted in very popular traditional gourmet meal in Taiwan. The 100 ℃, 4 h was normally cooking condition for commercial business. However, the pressure cooker with higher cooking temperature （106 ℃, 116 ℃ and 121 ℃） and different cooking time were under studied in order to improving efficiency, quality and even cost down. The samples of neck pork substitute, cooking at 106℃, 100 rain; 116℃, 75 min; 121 ℃, 45 min with different pressure were perfomed the result as well as traditional 20% fat in ordinary formulation and cooking at 100℃ for 4 h. During storage, the products were taste acceptable for 4 weeks at 4 ℃, 4 months at - 18 ℃ and better than 1 day at 25 ℃ storage.

Energy Management System Implementation Guidelines for Iron and Steel Industry

The iron and steel industry generally features the characteristics of large volume of energy consumption, multiple sorts of energy medium, complex secondary conversion, more recyclable extra energy, and the energy management of the field may involve the entire personnel, process and system, covering all links from designing, purchasing, energy storage, processing and conversion, distribution, energy use and extra energy recycling. The implementation guidelines summarizes the energy management experience and results and provide a systematic approach for the implementation of GB/T 23331-2012 and GB/T 29456-2012, sharing svstematic instructions and suggestions for the implementing paths and methods of creating, implementing, maintaining and improving the energy management system （EnMS） at the enterprise level.

Dptimizing Thermal Energy Storage Systems in the Hospitality Industry

Building energy analyses using forecasting optimization strategies are commonly used for predicting TES （thermal energy storage） system performance. These strategies produce perfect optimized cost savings and are not typically realized in the real world, unless a safety factor is applied. Rather than show how to improve the industry＇s ability to accurately model and simulate a true TES system design, this paper will show advanced building information strategies and energy management simulation techniques required to truly achieve the ideal optimized cost savings, determined from the TES energy simulation analysis. This paper uses the hospitality industry as a case study, showing the application of simulation and analytical modeling for an optimized partial TES system. As a result building energy managers can make better decisions through the entire building life cycle from the earliest concept model through operation and maintenance.

Progress in rectifying-based RRAM passive crossbar array

Resistive random access memory(RRAM) with crossbar structure is receiving widespread attentions due to its simple structure,high density,and feasibility of three-dimensional(3D) stack.It is an extremely promising solution for high density storage.However,a major issue of crosstalk restricts its development and application.In this paper,we will first introduce the integration methods of RRAM device and the existing crosstalk phenomenon in passive crossbar array,and then focus on the 1D1R(one diode and one resistor) structure and self-rectifying 1R(one resistor) structure which can restrain crosstalk and avoid misreading for the passive crossbar array.The test methods of crossbar array are also presented to evaluate the performances of passive crossbar array to achieve its commercial application in comparison with the active array consisting of one transistor and one RRAM cell(1T1R) structure.Finally,the future research direction of rectifying-based RRAM passive crossbar array is discussed.

Study on the Construction of Organizational Memory in Strategic Alliance

With the development of strategic alliance practice, strategic alliance pays more attention to its inter-learning and capacity improving. It focuses on how to learn from its original knowledge and routines effectively. In order to form strategic alliance successfully, we must integrate its original organizational memory effectively. Based on the characteristics of organizational memory in strategic alliance, this paper analyzes its interface and permeation, and studies the construction of organizational memory in strategic alliance organization.