采用埃弗雷特优化技术的船舶电力系统设计

船舶的电力系统经过了漫长的发展过程。最初电力系统只是作为起辅助作用的能源,为船舶的小型用电设备供电。随着电力系统的优化和储电技术的发展,现在的船舶综合电力系统已经作为必不可少的能量来源,甚至作为主要推进能源。传统的电力系统结构复杂、性能较差,本文基于埃弗雷特优化技术对传统的电力系统进行优化设计,提出电力系统的级联式区域配电技术。

Hydrogen storage properties of Mg-TiO_2 composite powder prepared by arc plasma method

Mg-based Mg-TiO2 composite powder was prepared by arc plasma evaporation of the Mg＋5%TiO2 mixture followed by passivation in air. ICP, XRD and SEM techniques were used to characterize the composition, phase components and microstructure of the composite powder. The hydrogen sorption properties of the composite powder were investigated by DSC and PCT techniques. According to the data from PCT measurements, the hydrogenation enthalpy and entropy changes of the composite powder are calculated to be-71.5 kJ/mol and-130.1 J/（K·mol）, respectively. Besides, the hydrogenation activation energy is determined to be 77.2 kJ/ mol. The results indicate that TiO2 added into Mg by arc plasma method can act as a catalyst to improve the hydrogen sorption kinetic properties of Mg.

Grid tie inverter energy stabilizing in smart distribution grid with energy storage

With the growing deployment of smart distribution grid,it has become urgent to investigate the smart distribution grid behavior during transient faults and improve the system stability.The feasibility of segmenting large power grids and multiple smart distribution grids interconnections using energy storage technology for improving the system dynamic stability was studied.The segmentation validity of the large power grids and smart distribution grid inverter output interconnections power system using energy storage technology was proved in terms of theoretical analysis.Then,the influences of the energy storage device location and capacity on the proposed method were discussed in detail.The conclusion is obtained that the ESD optimal locations are allocated at the tie line terminal buses in the interconnected grid,respectively.The effectiveness of the proposed method was verified by simulations in an actual power system.

The control and optimization of macro/micro-structure of ion conductive membranes for energy conversion and storage

Ion conductive membranes(ICMs)are frequently used as separators for energy conversion and storage technologies of fuel cells,flow battery,and hydrogen pump,because of their good ion-selective conduction and low electronic conductivity.Firstly,this feature article reviews the recent studies on the development of new nonfluorinated ICMs with low cost and their macro/micro-structure control.In general,these new nonfluorinated ICMs have lower conductivity than commercial perfluorinated ones,due to their poor ion transport channels.Increasing ion exchange capacity(IEC)would create more continuous hydrophilic channels,thus enhancing the conductivity.However,high IEC also expands the overall hydrophilic domains,weakens the interaction between polymer chains,enhances the mobility of polymer chains,and eventually induces larger swelling.The micro-scale expansion and macro-scale swelling of the ICMs with high IEC could be controlled by limiting the mobility of polymer chains.Based on this strategy,some ef ficient techniques have been developed,including covalent crosslinking,semi-interpenatrating polymer network,and blending.Secondly,this review introduces the optimization of macro/microstructure of both perfluorinated and nonfluorinated ICMs to improve the performance.Macro-scale multilayer composite is an ef ficient way to enhance the mechanical strength and the dimensional stability of the ICMs,and could also decrease the content of per fluorosulfonic acid resin in the membrane,thereby reducing the cost of the perfluorinated ICMs.Long side chain,multiple functionalization,small molecule inducing micro-phase separation,electrospun nano fiber,and organic–inorganic hybrid could construct more ef ficient ion transport channels,improving the ion conductivity of ICMs.

AS/RS based yard and yard planning

In this paper, we apply the split-platform automated storage/retrieval systems (SP-AS/RSs) (Hu et al., 2005) to store containers in the yard to improve the yard performance and to increase the utilization of the yard space. The layout of an SP-AS/RS based yard is described in detail. To achieve an efficient operation, we present a novel yard space allocation policy called the ‘second-carrier-based allocation policy’, which can help to alleviate the out-of-sequence problem of containers and the congestion of vehicles at the AS/RS racks. Different allocation policies are compared by an integrated container terminal simulation system. The simulation results show that the second-carrier-based policy is very efficient and has the potential to offer high terminal performance.

Development of Ferroelectric RAM （FRAM） for Mass Production

we have developed ferroelectric capacitor fabrication technique to realize low-voltage and high-density ferroelectric random access memory （FRAM）. High temperature deposited IrOxtop electrode reveals high crystalline quality which drastically reduces the degradation of ferroelectric film by preventing hydrogen diffusion into ferroelectric film. This improvement enables us to commercialize highly-reliable 1T 1C FRAM with memory density of 4 Mb or larger.

Electrochemical Energy Storage Technologies and Applications

The current need to fasten the implementation of renewable energies greatly depends on the development of competitive storage devices, and while there is not a single technology which is likely capable to competitively cover the wide range of possible demands, electrochemical technologies are one of the most promising for many of them. For the realization of this promise, new materials fulfilling criteria such as high energy density, high power density, competitive cost, reliability, and environmental compatibility need to be developed in the near future. Electrochemical energy storage devices can be classified into two main technologies： supercapacitors and batteries （including redox flow batteries）. Materials and applications for these technologies are discussed and compared, listing current status, technical and strategic challenges.

Highly structured metal-organic framework nanofibers for methane storage

Porous materials such as metal-organic frameworks(MOFs)with high theoretical volumetric gas uptake capacity are promising materials for gas storage and separation,but the structuring for practical applications is challenging.Herein,we report a general and feasible strategy to combine electrospinning with a phase conversion method to decorate polyacrylonitrile nanofibers(PAN NFs)with CuMOF(HKUST-1).The strategy is based on the combination of surface pretreatment of the NFs with Cu(OH)_(2) and a subsequent phase conversion into HKUST-1 crystals(PCHKUST-1).A significant higher loading of HKUST-1 in the PAN NF matrix was achieved by the phase conversion method compared with direct electrospinning of MOF slurries or insitu growth of MOF crystals on NFs.As a result,the hierarchical structured PC(phase conversion)-HKUST-1 NFs revealed the highest gravimetric storage capacity of 86 cm^(3) g^(-1)(STP)at 3500 kPa and 298 K for methane(CH_(4)),which is higher than other HKUST-1 NFs reported previously.The improved CH_(4) uptake can be explained by the high loading of HKUST-1 due to the high availability of Cu-ions localized on the surface of the NFs during the phase conversion process,resulting in high surface area and excellent gas access of the phase converted HKUST-1.Thus,the developed strategy of structuring MOFs could be of interest for the fabrication of tailor-made MOF NF architectures for other energy and environmental applications.

Biomass-derived carbon materials with structural diversities and their applications in energy storage

Currently, carbon materials, such as graphene,carbon nanotubes, activated carbon, porous carbon, have been successfully applied in energy storage area by taking advantage of their structural and functional diversity. However, the development of advanced science and technology has spurred demands for green and sustainable energy storage materials.Biomass-derived carbon, as a type of electrode materials, has attracted much attention because of its structural diversities,adjustable physical/chemical properties, environmental friendliness and considerable economic value. Because the nature contributes the biomass with bizarre micro structures,the biomass-derived carbon materials also show naturally structural diversities, such as OD spherical, 1D fibrous, 2D lamellar and 3D spatial structures. In this review, the structure design of biomass-derived carbon materials for energy storage is presented. The effects of structural diversity, porosity and surface heteroatom doping of biomass-derived carbon materials in supercapacitors, lithium-ion batteries and sodium-ion batteries are discussed in detail. In addition, the new trends and challenges in biomass-derived carbon materials have also been proposed for further rational design of biomass-derived carbon materials for energy storage.