The recrystallization textures in 95%rolled aluminum sheets with different purities and initial textures were investigated.The effects of recovery levels and the dragging effects induced by impurities on the effective...The recrystallization textures in 95%rolled aluminum sheets with different purities and initial textures were investigated.The effects of recovery levels and the dragging effects induced by impurities on the effective driving force and corresponding behaviors of oriented nucleation and oriented growth during annealing were analyzed.The oriented nucleation is a common behavior in the initial stage of primary recrystallization if the effective driving force in deformed matrix is not too high to reduce the necessity of nucleation period.Oriented growth might appear if the temperature is not too high and the grains,of which the misorientation to matrix is about 40°〈111〉,have enough time and space to expand growth advantages,while certain reduction of effective driving force is also necessary.The recrystallization textures could be changed by controlling initial textures and effective driving forces which can be regulated by recovery levels and dragging effects.展开更多
La0.7Ce0.3Ni3.75Mn0.35Al0.15Cu0.75-xFex （x=0-0.20） hydrogen storage alloys were synthesized by induction melting and subsequent annealing treatment, and phase structure and electrochemical characteristics were inves...La0.7Ce0.3Ni3.75Mn0.35Al0.15Cu0.75-xFex （x=0-0.20） hydrogen storage alloys were synthesized by induction melting and subsequent annealing treatment, and phase structure and electrochemical characteristics were investigated. All alloys consist of a single LaNi5 phase with CaCu5 structure, and the lattice constant a and the cell volume （V） of the LaNi5 phase increase with increasing x value. The maximum discharge capacity gradually decreases from 319.0 mA？h/g （x=0） to 291.9 mA？h/g （x=0.20） with the increase in x value. The high-rate dischargeability at the discharge current density of 1200 mA/g decreases monotonically from 53.1% （x=0） to 44.2% （x=0.20）. The cycling stability increases with increasing x from 0 to 0.20, which is mainly ascribed to the improvement of the pulverization resistance.展开更多
For the purpose of improving the electrochemical cycle stability of the La-Mg-Ni based A2BT-type electrode alloys, both reducing Mg content and substituting La with Pr were adopted. The Lao.8-xPrxMg0.2Ni3.15Co0.2A10.1...For the purpose of improving the electrochemical cycle stability of the La-Mg-Ni based A2BT-type electrode alloys, both reducing Mg content and substituting La with Pr were adopted. The Lao.8-xPrxMg0.2Ni3.15Co0.2A10.1Si0.05 （x=0, 0.1, 0.2, 0.3, 0.4） electrode alloys were fabricated by casting and annealing. The investigation on the structures and electrochemical performances of the alloys was performed. The obtained results reveal that the as-cast and annealed alloys comprise two major phases, （La, Mg）2Ni7 phase with the hexagonal Ce2NiT-type structure and LaNi5 phase with the hexagonal CaCus-type structure, as well as a little residual LaNi3 phase. It is also found that the addition of Pr element observably affects the electrochemical hydrogen storage characteristics of the alloys, just as the discharge capacity and high rate discharge ability （HRD） first rise then fall with the growing of Pr content, and among all the alloys, the as-cast and annealed （x=0.3） alloys generate the largest discharge capacities of 360.8 and 386.5 mA.h/g, respectively. Additionally, the electrochemical cycle stability of all the alloys markedly grows with the increase of Pr content. The capacity retaining rate （S100） at the 100th charging and discharging cycle is enhanced from 64.98% to 77.55% for the as-cast alloy, and from 76.60% to 95.72% for the as-annealed alloy by rising Pr content from 0 to 0.4. Furthermore, the substitution of Pr for La results in first increase and then decrease in the hydrogen diffusion coefficient （D）, the limiting current density （IL） as well as the electrochemical impedance.展开更多
With the rapid development of microelectronics and hardware,the use of ever faster micro processors and new architecture must be continued to meet tomorrow′s computing needs. New processor microarchitectures are need...With the rapid development of microelectronics and hardware,the use of ever faster micro processors and new architecture must be continued to meet tomorrow′s computing needs. New processor microarchitectures are needed to push performance further and to use higher transistor counts effectively.At the same time,aiming at different usages,the processor has been optimized in different aspects,such as high performace,low power consumption,small chip area and high security. SOC (System on chip)and SCMP (Single Chip Multi Processor) constitute the main processor system architecture.展开更多
At present Coal Bed Methane （CBM） has become the important part of clean energy in China. and will optimize the energy structure in China unceasingly. However, warehousing and transportation of CBM become one of the...At present Coal Bed Methane （CBM） has become the important part of clean energy in China. and will optimize the energy structure in China unceasingly. However, warehousing and transportation of CBM become one of the core factors that restrain its exploitation and utilization at present, due to the space-time character of natural deposit and modem utilization of CBM. In this paper, according to the character of CBM and the expanding trend of its utilization, the necessity of constructing the CBM＇s warehousing and transportation management system demonstrated. Index system that influence CBM＇s warehousing and transportation is established. And CBM＇s warehousing and transportation model is established by Voronoi diagram. In light of above research, CBM＇s warehousing and transportation management system based on Geography Information System （GIS） is designed, Using this system, CBM＇s warehousing and allocation center in one mining area is optimized. Research shows that to reinforce CBM＇s warehousing and transportation management is one of the key factors for coordinating the development of its development and utilization, thereby ensuring its sustainable development and utilization.展开更多
The rapid consumption of fossil fuels has caused increasingly climatic issues and energy crisis,which leads to the urgent demand for developing sustainable and clean energies.Electrocatalysts play a key role in the de...The rapid consumption of fossil fuels has caused increasingly climatic issues and energy crisis,which leads to the urgent demand for developing sustainable and clean energies.Electrocatalysts play a key role in the development of electrochemical energy conversion and storage devices.Especially,developing efficient and cost-effective catalysts is important for the large-scale application of these devices.Among various electrocatalyst candidates,earth abundant transition metal compound(TMC)-based electrocatalysts are being widely and rapidly studied owing to their high electrocatalytic performances.This paper reviews the recent and representative advances in efficient TMC-based electrocatalysts(i.e.,oxides,sulfides,selenides,phosphides,carbides and nitrides)for energy electrocatalytic reactions,including hydrogen evolution reaction(HER),oxygen evolution reaction(OER)and oxygen reduction reaction(ORR).Different compounds with different applications are summarized and the relative mechanisms are also discussed.The strategies for developing earth-abundant and low-cost TMC-based electrocatalysts are introduced.In the end,the current challenges and future perspectives in the development of TMC research are briefly discussed.This review also provides the latest advance and outlines the frontiers in TMC-based electrocatalysts,which should provide inspirations for the further development of low-cost and high-efficiency catalysts for sustainable clean energy technologies.展开更多
The development of transition metal oxidebased electrode materials with proper controlled structures is highly desirable for high-performance supercapacitors.However,it remains a major challenge.Here,we present the fi...The development of transition metal oxidebased electrode materials with proper controlled structures is highly desirable for high-performance supercapacitors.However,it remains a major challenge.Here,we present the first synthesis of bowl-like Ni Co2O4nanosheet clusters through a simple soft template guided hydrothermal strategy.The resulting bowl-like clusters consist of numerous Ni Co2O4nanosheets with an average thickness of 19 nm and possess a mean diameter of 1μm along with a specific surface area of40 m2g^-1.Remarkably,serving as an electrode material in a three-electrode system,the bowl-like Ni Co2O4nanosheet clusters exhibit a high specific capacity of 1068 F g^-1at a current density of 1 A g^-1and excellent cycling stability with90%capacitance retention after 5000 charge-discharge cycles.Meanwhile,an asymmetric supercapacitor(ASC)assembled with the Ni Co2O4clusters and activated carbon(AC)as the two electrodes exhibits a high specific capacitance of 129 F g^-1at 1 A g^-1,along with a high energy density of 33 W h kg^-1at a power density of 0.66 k W kg^-1.Such performance is superior to those of many commercial supercapacitors.This study opens a new avenue for the construction of ordered complex particles with controlled architectures for energy storage and conversion applications.展开更多
Stimulus-responsive energy storage devices,which can respond to external stimuli,such as heat,pH,moisture,pressure,or electric field,have recently attracted intensive attention,aiming at the ever-increasing demand for...Stimulus-responsive energy storage devices,which can respond to external stimuli,such as heat,pH,moisture,pressure,or electric field,have recently attracted intensive attention,aiming at the ever-increasing demand for safe batteries and smart electronics.The most typical stimulus-responsive materials are polymers that can change their conformation by forming and destroying secondary forces,including hydrogen bonds and electrostatic interactions in response to external stimuli,accompanied by changes in the intrinsic properties such as conductivity and hydrophobicity.Although the applications of stimulus-responsive functions in rechargeable batteries are still in the early stage because of the complexity and compatibility of battery architectures,many new concepts of regulating the polymer structures upon applications of stimuli have already been developed.In this review,we discuss the recent progress of stimulus-responsive polymers on energy storage devices featuring thermal protection and intelligent scenarios,with a focus on the detailed structural transformations of polymers under a given stimulus and the corresponding changes in battery performance.Finally,we present perspectives on the current limitations and future research directions of stimulus-responsive polymers for energy storage devices.展开更多
文摘The recrystallization textures in 95%rolled aluminum sheets with different purities and initial textures were investigated.The effects of recovery levels and the dragging effects induced by impurities on the effective driving force and corresponding behaviors of oriented nucleation and oriented growth during annealing were analyzed.The oriented nucleation is a common behavior in the initial stage of primary recrystallization if the effective driving force in deformed matrix is not too high to reduce the necessity of nucleation period.Oriented growth might appear if the temperature is not too high and the grains,of which the misorientation to matrix is about 40°〈111〉,have enough time and space to expand growth advantages,while certain reduction of effective driving force is also necessary.The recrystallization textures could be changed by controlling initial textures and effective driving forces which can be regulated by recovery levels and dragging effects.
基金Project (51001043) supported by the National Natural Science Foundation of ChinaProject (NCET2011) supported by Program for New Century Excellent Talents in University, China+4 种基金Project (201104390) supported by China Postdoctoral Science Special FoundationProject (20100470990) supported by China Postdoctoral Science FoundationProject (2012IRTSTHN007) supported by Program for Innovative Research Team (in Science and Technology) in the University of Henan Province, ChinaProject (2011J1003) supported by Baotou Science and Technology Project, ChinaProject (B2010-13) supported by the Doctoral Foundation of Henan Polytechnic University, China
文摘La0.7Ce0.3Ni3.75Mn0.35Al0.15Cu0.75-xFex （x=0-0.20） hydrogen storage alloys were synthesized by induction melting and subsequent annealing treatment, and phase structure and electrochemical characteristics were investigated. All alloys consist of a single LaNi5 phase with CaCu5 structure, and the lattice constant a and the cell volume （V） of the LaNi5 phase increase with increasing x value. The maximum discharge capacity gradually decreases from 319.0 mA？h/g （x=0） to 291.9 mA？h/g （x=0.20） with the increase in x value. The high-rate dischargeability at the discharge current density of 1200 mA/g decreases monotonically from 53.1% （x=0） to 44.2% （x=0.20）. The cycling stability increases with increasing x from 0 to 0.20, which is mainly ascribed to the improvement of the pulverization resistance.
基金Projects(51161015,50961009) supported by the National Natural Science Foundation of ChinaProject(2011AA03A408) supported by the National High Technology Research and Development Program of ChinaProjects(2011ZD10,2010ZD05) supported by the Natural Science Foundation of Inner Mongolia,China
文摘For the purpose of improving the electrochemical cycle stability of the La-Mg-Ni based A2BT-type electrode alloys, both reducing Mg content and substituting La with Pr were adopted. The Lao.8-xPrxMg0.2Ni3.15Co0.2A10.1Si0.05 （x=0, 0.1, 0.2, 0.3, 0.4） electrode alloys were fabricated by casting and annealing. The investigation on the structures and electrochemical performances of the alloys was performed. The obtained results reveal that the as-cast and annealed alloys comprise two major phases, （La, Mg）2Ni7 phase with the hexagonal Ce2NiT-type structure and LaNi5 phase with the hexagonal CaCus-type structure, as well as a little residual LaNi3 phase. It is also found that the addition of Pr element observably affects the electrochemical hydrogen storage characteristics of the alloys, just as the discharge capacity and high rate discharge ability （HRD） first rise then fall with the growing of Pr content, and among all the alloys, the as-cast and annealed （x=0.3） alloys generate the largest discharge capacities of 360.8 and 386.5 mA.h/g, respectively. Additionally, the electrochemical cycle stability of all the alloys markedly grows with the increase of Pr content. The capacity retaining rate （S100） at the 100th charging and discharging cycle is enhanced from 64.98% to 77.55% for the as-cast alloy, and from 76.60% to 95.72% for the as-annealed alloy by rising Pr content from 0 to 0.4. Furthermore, the substitution of Pr for La results in first increase and then decrease in the hydrogen diffusion coefficient （D）, the limiting current density （IL） as well as the electrochemical impedance.
文摘With the rapid development of microelectronics and hardware,the use of ever faster micro processors and new architecture must be continued to meet tomorrow′s computing needs. New processor microarchitectures are needed to push performance further and to use higher transistor counts effectively.At the same time,aiming at different usages,the processor has been optimized in different aspects,such as high performace,low power consumption,small chip area and high security. SOC (System on chip)and SCMP (Single Chip Multi Processor) constitute the main processor system architecture.
基金Acknowledgments： This work was supported by the National Natural Science Foundation of China （Grant No. 70971129） and Soft Science Project （Grant No. 2008041036-02）. The authors would like to thank anonymous reviewers for their helpful comments.
文摘At present Coal Bed Methane （CBM） has become the important part of clean energy in China. and will optimize the energy structure in China unceasingly. However, warehousing and transportation of CBM become one of the core factors that restrain its exploitation and utilization at present, due to the space-time character of natural deposit and modem utilization of CBM. In this paper, according to the character of CBM and the expanding trend of its utilization, the necessity of constructing the CBM＇s warehousing and transportation management system demonstrated. Index system that influence CBM＇s warehousing and transportation is established. And CBM＇s warehousing and transportation model is established by Voronoi diagram. In light of above research, CBM＇s warehousing and transportation management system based on Geography Information System （GIS） is designed, Using this system, CBM＇s warehousing and allocation center in one mining area is optimized. Research shows that to reinforce CBM＇s warehousing and transportation management is one of the key factors for coordinating the development of its development and utilization, thereby ensuring its sustainable development and utilization.
基金supported by the National Natural Science Foundation of China(51804216 and 51972224)the Young Elite Scientists Sponsorship Program by CAST(2018QNRC001)+1 种基金Tianjin Natural Science Foundation(17JCQNJC02100)support from China Postdoctoral Science Foundation(2019M661014)。
文摘The rapid consumption of fossil fuels has caused increasingly climatic issues and energy crisis,which leads to the urgent demand for developing sustainable and clean energies.Electrocatalysts play a key role in the development of electrochemical energy conversion and storage devices.Especially,developing efficient and cost-effective catalysts is important for the large-scale application of these devices.Among various electrocatalyst candidates,earth abundant transition metal compound(TMC)-based electrocatalysts are being widely and rapidly studied owing to their high electrocatalytic performances.This paper reviews the recent and representative advances in efficient TMC-based electrocatalysts(i.e.,oxides,sulfides,selenides,phosphides,carbides and nitrides)for energy electrocatalytic reactions,including hydrogen evolution reaction(HER),oxygen evolution reaction(OER)and oxygen reduction reaction(ORR).Different compounds with different applications are summarized and the relative mechanisms are also discussed.The strategies for developing earth-abundant and low-cost TMC-based electrocatalysts are introduced.In the end,the current challenges and future perspectives in the development of TMC research are briefly discussed.This review also provides the latest advance and outlines the frontiers in TMC-based electrocatalysts,which should provide inspirations for the further development of low-cost and high-efficiency catalysts for sustainable clean energy technologies.
基金supported by the National Natural Science Foundation of China(21774076,61774102 and 51573091)the National Key Research and Development Program of China(2017YFE0195800)+2 种基金the Program of the Shanghai Committee of Science and Technology(17JC1403200)the Program of Shanghai Academic Research Leader(19XD1421700)the Program of Distinguished Professor of Special Appointment at Shanghai Institutions of Higher Learning。
文摘The development of transition metal oxidebased electrode materials with proper controlled structures is highly desirable for high-performance supercapacitors.However,it remains a major challenge.Here,we present the first synthesis of bowl-like Ni Co2O4nanosheet clusters through a simple soft template guided hydrothermal strategy.The resulting bowl-like clusters consist of numerous Ni Co2O4nanosheets with an average thickness of 19 nm and possess a mean diameter of 1μm along with a specific surface area of40 m2g^-1.Remarkably,serving as an electrode material in a three-electrode system,the bowl-like Ni Co2O4nanosheet clusters exhibit a high specific capacity of 1068 F g^-1at a current density of 1 A g^-1and excellent cycling stability with90%capacitance retention after 5000 charge-discharge cycles.Meanwhile,an asymmetric supercapacitor(ASC)assembled with the Ni Co2O4clusters and activated carbon(AC)as the two electrodes exhibits a high specific capacitance of 129 F g^-1at 1 A g^-1,along with a high energy density of 33 W h kg^-1at a power density of 0.66 k W kg^-1.Such performance is superior to those of many commercial supercapacitors.This study opens a new avenue for the construction of ordered complex particles with controlled architectures for energy storage and conversion applications.
基金financially supported by the National Key R&D Program of China(2017YFE0127600)the Strategic Priority Research Program of the Chinese Academy of Sciences(XDA22010600)+4 种基金the National Natural Science Foundation of China(21975271)the Key-Area Research and Development Program of Guangdong Province(2020B090919005)Shandong Natural Science Foundation(ZR2020ZD07 and ZR2021QB106)the financial support from the Youth Innovation Promotion Association of CAS(2019214)Shandong Energy Institute(SEI 1202127)。
文摘Stimulus-responsive energy storage devices,which can respond to external stimuli,such as heat,pH,moisture,pressure,or electric field,have recently attracted intensive attention,aiming at the ever-increasing demand for safe batteries and smart electronics.The most typical stimulus-responsive materials are polymers that can change their conformation by forming and destroying secondary forces,including hydrogen bonds and electrostatic interactions in response to external stimuli,accompanied by changes in the intrinsic properties such as conductivity and hydrophobicity.Although the applications of stimulus-responsive functions in rechargeable batteries are still in the early stage because of the complexity and compatibility of battery architectures,many new concepts of regulating the polymer structures upon applications of stimuli have already been developed.In this review,we discuss the recent progress of stimulus-responsive polymers on energy storage devices featuring thermal protection and intelligent scenarios,with a focus on the detailed structural transformations of polymers under a given stimulus and the corresponding changes in battery performance.Finally,we present perspectives on the current limitations and future research directions of stimulus-responsive polymers for energy storage devices.
