Single-atom modified graphene cocatalyst for enhanced photocatalytic CO_(2) reduction on halide perovskite

Metal halide perovskite(MHP)has become one of the most promising materials for photocatalytic CO_(2) reduction owing to the wide light absorption range,negative conduction band position and high reduction ability.However,photoreduction of CO_(2) by MHP remains a challenge because of the slow charge separation and transfer.Herein,a cobalt single-atom modified nitrogen-doped graphene(Co-NG)cocatalyst is prepared for enhanced photocatalytic CO_(2) reduction of bismuth-based MHP Cs_(3)Bi_(2)Br_(9).The optimal Cs_(3)Bi_(2)Br_(9)/Co-NG composite exhibits the CO production rate of 123.16μmol g^(-1)h^(-1),which is 17.3 times higher than that of Cs_(3)Bi_(2)Br_(9).Moreover,the Cs_(3)Bi_(2)Br_(9)/Co-NG composite photocatalyst exhibits nearly 100% CO selectivity as well as impressive long-term stability.Charge carrier dynamic characterizations such as Kelvin probe force microscopy(KPFM),single-particle PL microscope and transient absorption(TA)spectroscopy demonstrate the vital role of Co-NG cocatalyst in accelerating the transfer and separation of photogenerated charges and improving photocatalytic performance.The reaction mechanism has been demonstrated by in situ diffuse reflectance infrared Fourier-transform spectroscopy measurement.In addition,in situ X-ray photoelectron spectroscopy test and theoretical calculation reveal the reaction reactive sites and reaction energy barriers,demonstrating that the introduction of Co-NG promotes the formation of ^(*)COOH intermediate,providing sufficient evidence for the highly selective generation of CO.This work provides an effective single-atom-based cocatalyst modification strategy for photocatalytic CO_(2) reduction and is expected to shed light on other photocatalytic applications.

Mg-doped SrTaO_(2)N as a visible-light-driven H_(2)-evolution photocatalyst for accelerated Z-scheme overall water splitting

Perovskite SrTaO_(2)N is one of the most promising narrow-bandgap photocatalysts for Z-scheme overall water splitting.However,the formation of defect states during thermal nitridation severely hinders the separation of charges,resulting in poor photocatalytic activity.In the present study,we successfully synthesize SrTaO_(2)N photocatalyst with low density of defect states,uniform morphology and particle size by flux-assisted one-pot nitridation combined with Mg doping.Some important parameters,such as the size of unit cell,the content of nitrogen,and microstructure,prove the successful doping of Mg.The defect-related carrier recombination has been significantly reduced by Mg doping,which effectively promotes the charge separation.Moreover,Mg doping induces a change of the band edge,which makes proton reduction have a stronger driving force.After modifying with the core/shell-structured Pt/Cr_(2)O_(3)cocatalyst,the H_(2)evolution activity of the optimized SrTaO_(2)N:Mg is 10 times that of the undoped SrTaO_(2)N,with an impressive apparent quantum yield of 1.51%at 420 nm.By coupling with Au-FeCoO_(x)modified BiVO_(4)as an O_(2)-evolution photocatalyst and[Fe(CN)_(6)]_(3)−/[Fe(CN)_(6)]_(4)−as the redox couple,a redox-based Z-scheme overall water splitting system is successfully constructed with an apparent quantum yield of 1.36%at 420 nm.This work provides an alternative way to prepare oxynitride semiconductors with reduced defects to promote the conversion of solar energy.

Strategies for engineering metal-organic frameworks as efficient photocatalysts

Environmental pollution and energy deficiency represent major problems for the sustainability of the modern world. Photocatalysis has recently emerged as an effective and environmentally friendly technique to address some of these sustainability issues,although the key to the success of this approach is dependent on the photocatalysts themselves. Based on their attractive physic chemical properties,including their ultrahigh surface areas,homogeneous active sites and tunable functionality,metal-organic frameworks（MOFs） have become interesting platforms for the development of solar energy conversion devices. Furthermore,MOFs have recently been used in a wide variety of applications,including heterogeneous photocatalysis for pollutant degradation,organic transformations,hydrogen production and CO2 reduction. In this review,we have highlighted recent progress towards the application of MOFs in all of these areas. We have collected numerous reported examples of the use of MOFs in these areas,as well as providing some analysis of the key factors influencing the efficiency of these systems. Moreover,we have provided a detailed discussion of new strategies that have been developed for enhancing the photocatalytic activity of MOFs. Finally,we have provided an outlook for this area in terms of the future challenges and potential prospects for MOFs in photocatalysis.

Integrating non-precious-metal cocatalyst Ni_3N with g-C_3N_4 for enhanced photocatalytic H_2 production in water under visible-light irradiation

Photocatalytic H2 production via water splitting in a noble-metal-free photocatalytic system has attracted much attention in recent years.In this study,noble-metal-free Ni3N was used as an active cocatalyst to enhance the activity of g-C3N4 for photocatalytic H2 production under visible-light irradiation(λ>420 nm).The characterization results indicated that Ni3N nanoparticles were successfully loaded onto the g-C3N4,which accelerated the separation and transfer of photogenerated electrons and resulted in enhanced photocatalytic H2 evolution under visible-light irradiation.The hydrogen evolution rate reached^305.4μmol h^-1 g^-1,which is about three times higher than that of pristine g-C3N4,and the apparent quantum yield(AQY)was^0.45%atλ=420.Furthermore,the Ni3N/g-C3N4 photocatalyst showed no obvious decrease in the hydrogen production rate,even after five cycles under visible-light irradiation.Finally,a possible photocatalytic hydrogen evolution mechanism for the Ni3N/g-C3N4 system is proposed.

Ni-based photocatalytic H_2-production cocatalysts

Photocatalysis is believed to be one of the best methods to realize sustainable H2 production. However, achieving this through heterogeneous photocatalysis still remains a great challenge owing to the absence of active sites, sluggish surface reaction kinetics, insufficient charge separation, and a high thermodynamic barrier. Therefore, cocatalysts are necessary and of great significance in boosting photocatalytic H2 generation. This review will focus on the promising and appealing low-cost Ni-based H2-generation cocatalysts as the alternatives for the high-cost and low-abundance noble metal cocatalysts. Special emphasis has been placed on the design principle, modification strategies for further enhancing the activity and stability of Ni-based cocatalysts, and identification of the exact active sites and surface reaction mechanisms. Particularly, four types of modification strategies based on increased light harvesting, enhanced charge separation, strengthened interface interaction, and improved electrocatalytic activity have been thoroughly discussed and compared in detail. This review may open a new avenue for designing highly active and durable Ni-based cocatalysts for photocatalytic H2 generation.

Ni-P cluster modified carbon nitride toward efficient photocatalytic hydrogen production

Exploring low-cost cocatalyst to take over noble metal cocatalyst is still challenging in the field of photocatalytic proton reduction.Herein,Ni-P alloy clusters are anchored onto the surface of polymeric carbon nitride through a chemical plating method and serve as highly efficient and stable cocatalyst toward photocatalytic proton reduction.An effective role in promoting the charge separation and migration of the photocatalytic system is demonstrated for Ni-P clusters,which essentially enhance the photocatalytic H2-production rate to a value of 1506μmol h^–1 g^–1.This performance is comparable to that of the benchmark of Pt-modified carbon nitride.This work highlights that the Ni-P alloy could be a potential alternative to noble metal cocatalyst in the photocatalytic reactions.

Synergistic effect of Co（Ⅱ）-hole and Pt-electron cocatalysts for enhanced photocatalytic hydrogen evolution performance of P-doped g-C3N4

g-C3N4 is a metal-free semiconductor and a potential candidate for photocatalytic H2 production,however,the drawbacks,rapid recombination rate and limited migration efficiency of photogenerated carriers,restrict its photocatalytic activity.Herein,Co(II)as a hole cocatalyst modified P-doped g-C3N4 were successfully prepared to ameliorate the separation efficiency of photoinduced carriers and enhance the photocatalytic hydrogen production.The photocatalytic results demonstrated that the P-doped g-C3N4(PCN)exhibited higher photocatalytic activity compared with pure g-C3N4,while Co(II)/PCN photocatalyst exhibited further enhancement of photocatalytic performance.The proposed possible mechanism based on various characterizations is that P-doping can modulate the electronic structure of g-C3N4 to boost the separation of photogenerated-e-and h+;while the synergistic effect of both Co(II)(as hole cocatalyst)and Pt(as electron cocatalyst)can not only lead to the directional shunting of photogenerated e+-h?pairs,but further accelerate the photogenerated electrons transfer to Pt in order to join the photocatalytic reduction process for hydrogen evolution.As a result,the transportation and separation of photoinduced carriers were accelerated to greatest extent in the Pt/Co(II)/PCN photocatalyst.

Accelerating photocatalytic hydrogen evolution and pollutant degradation by coupling organic co-catalysts with TiO_2

Accelerating the separation efficiency of photoexcited electron-hole pairs with the help of highly active co-catalysts has proven to be a promising approach for improving photocatalytic activity. Thus far, the most developed co-catalysts for semiconductor-based photocatalysis are inorganic materials;the employment of a specific organic molecule as a co-catalyst for photocatalytic hydrogen evolution and pollutant photodegradation is rare and still remains a challenging task. Herein, we report on the use of an organic molecule, oxamide (OA), as a novel co-catalyst to enhance electron- hole separation, photocatalytic H2 evolution, and dye degradation over TiO2 nanosheets. OA-modified TiO2 samples were prepared by a wet chemical route and demonstrated improved light absorption in the visible-light region and more efficient charge transport. The photocatalytic performance of H2 evolution from water splitting and rhodamine B (RhB) degradation for an optimal OA-modified TiO2 photocatalyst reached 2.37 mmol g^–1 h^–1 and 1.43 × 10^-2 min^-1, respectively, which were 2.4 and 3.8 times higher than those of pristine TiO2, respectively. A possible mechanism is proposed, in which the specific π-conjugated structure of OA is suggested to play a key role in the enhancement of the charge transfer and catalytic capability of TiO2. This work may provide advanced insight into the development of a variety of metal-free organic molecules as functional co-catalysts for improved solar-to-fuel conversion and environmental remediation.

The roles and mechanism of cocatalysts in photocatalytic water splitting to produce hydrogen

Photocatalytic hydrogen(H2)evolution via water spilling over semiconductors has been considered to be one of the most promising strategies for sustainable energy supply in the future to provide non-pollution and renewable energy.The key to efficient conversion of solar-chemical energy is the design of an efficient structure for high charge separation and transportation.Therefore,cocatalysts are necessary in boosting photocatalytic H2 evolution.To date,semiconductor photocatalysts have been modified by various cocatalysts due to the extended light harvest,enhanced charge carrier separation efficiency and improved stability.This review focuses on recent developments of cocatalysts in photocatalytic H2 evolution,the roles and mechanism of the cocatalysts are discussed in detail.The cocatalysts can be divided into the following categories:metal/alloy cocatalysts,metal phosphides cocatalysts,metal oxide/hydroxide cocatalysts,carbon-based cocatalysts,dual cocatalysts,Z-scheme cocatalysts and MOFs cocatalysts.The future research and forecast for photocatalytic hydrogen generation are also suggested.

Metal‐organic framework‐derived multifunctional photocatalysts

Metal‐organic framework(MOF)‐derived nanomaterials have attracted widespread attention,because the excellent features,such as high surface area,porosity and tunable properties are inherited from MOFs.Moreover,the derivatives avoid the poor conductivity and stability of MOFs.MOF‐derived nanomaterials can easily be regulated by a specific selection of metal nodes and organic linkers,resulting in multifunctionality in photocatalysis.MOF derivatives can be used not only as semiconductor photocatalysts,but also as co‐catalysts for photocatalytic hydrogen evolution,CO_(2) reduction,pollutants degradation,etc.This review focuses on the multifunctional applications of MOF derivatives in the field of photocatalysis.The researches in recent years are analyzed and summarized from the aspects of preparation,modification and application of MOF derivatives.At the end of the review,the development and challenges of MOF derivatives applied in photocatalysis in the future are put forward,in order to provide more references for further research in this field and bring new inspiration.

MgO and Au nanoparticle Co-modified g-C_(3)N_(4)photocatalysts for enhanced photoreduction of CO_(2)with H_(2)O

The photoreduction of CO_(2)to achieve high-value-added hydrocarbons under simulated sunlight irradiation is advantageous,but challenging.In this study,a series of MgO and Au nanoparticle-co-modified g-C_(3)N_(4)photocatalysts were synthesized and subsequently applied for the photocatalytic reduction of CO_(2)with H2O under simulated solar irradiation.The best photocatalytic performance was demonstrated by the Au and 3%MgO-co-modified g-C_(3)N_(4)photocatalysts with CO,CH_(4),CH3OH,and CH3CHO yields of 423.9,83.2,47.2,and 130.4μmol/g,respectively,in a 3-h reaction.We investigated the effects of MgO and Au as cocatalysts on photocatalytic behaviors,respectively.The characterizations and experimental results showed that the enhanced photocatalytic activity was due to the synergistic effect among the components of the ternary photocatalyst.The cocatalyst MgO can activate CO_(2)(adsorbed at the interface between the MgO and Au particles),and the Mg-N bonds formed in the MgO-CN nanosheets played an important role in the charge transfer.Meanwhile,the Au particles that were modified into MgO/g-C_(3)N_(4)can increase the absorption of visible light via the surface plasmon resonance effect and further reduce the activation energies of the photoreduction of CO_(2)using H2O.This study provided an effective method for the modification of traditional primary photocatalysts with promising performance for photocatalytic CO_(2)reduction.

Synthesis of PdS-CdSe@CdS-Au nanorods with asymmetric tips with improved H_2 production efficiency in water splitting and increased photostability

Charge separation is a crucial problem in photocatalysis.We used a wet‐chemical method to synthesize asymmetrically tipped PdS‐CdSe‐seeded CdS(CdSe@CdS)‐Au nanorod(NR)heterostructures(HCs).In these HCs,electrons and holes are rapidly separated and transported to opposite ends of the NRs by internal electric fields.Their ultraviolet‐visible absorption spectra showed strong electronic coupling between both tips and the CdS body.PdS‐CdSe@CdS‐Au achieved a H2production rate of ca.1100?mol in5h;this is two orders of magnitude greater than the rate achieved with Au‐CdSe@CdS NRs with only one tip.PdS‐CdSe@CdS‐Au NRs can withstand4h of photoirradiation,compared to1.5h for CdSe@CdS NRs,indicating that the photostability of PdS‐CdSe@CdS‐Au is much better than that of CdS.The greatly improved photocatalytic activity and stability are attributed to efficient charge separation and rapid charge transport in the PdS‐CdSe@CdS‐Au HCs.

Ti_(3)C_(2) MXene co-catalyst assembled with mesoporous TiO_(2) for boosting photocatalytic activity of methyl orange degradation and hydrogen production

Photocatalytic degradation and hydrogen production using solar energy through semiconductor photocatalysts are deemed to be a powerful approach for solving environmental and energy crisis.However,the biggest challenge in photocatalysis is the efficient separation of photo-induced carriers.To this end,we report that the mesoporous TiO_(2)nanoparticles are anchored on highly conductive Ti_(3)C_(2)MXene co-catalyst by electrostatic self-assembly strategy.The constructed mesoporous TiO_(2)/Ti_(3)C_(2)composites display that the mesoporous TiO_(2)nanoparticles are uniformly distributed on the surface of layer structured Ti_(3)C_(2)nanosheets.More importantly,the as-obtained mesoporous TiO_(2)/Ti_(3)C_(2)composites reveal the significantly enhanced light absorption performance,photo-induced carriers separation and transfer ability,thus boosting the photocatalytic activity.The photocatalytic methyl orange degradation efficiency of mesoporous TiO_(2)/Ti_(3)C_(2)composite with an optimized Ti_(3)C_(2)content(3 wt%)can reach 99.6%within 40 min.The capture experiments of active species confirm that the·O_(2)-and·OH play major role in photocatalytic degradation process.Furthermore,the optimized mesoporous TiO_(2)/Ti_(3)C_(2)composite also shows an excellent photocatalytic H2 production rate of 218.85μmol g^(-1)h^(-1),resulting in a 5.6 times activity as compared with the pristine mesoporous TiO_(2)nanoparticles.This study demonstrates that the MXene family materials can be applied as highly efficient noble-metal-free co-catalysts in the field of photocatalysis.

Photocatalytic hydrogen evolution activity over MoS_2/ZnIn_2S_4 microspheres

MoS2/ZnIn2S4composites with MoS2anchored on the surface of ZnIn2S4microspheres were synthesized by a two‐step hydrothermal process.The obtained samples were characterized by X‐ray diffraction,field emission scanning electron microscopy,energy dispersive X‐ray spectroscopy,high‐resolution transmission electron microscopy,X‐ray photoelectron spectroscopy,Raman spectroscopy,ultraviolet–visible diffuse reflectance absorption spectroscopy,nitrogen adsorption–desorption measurements,photoluminescence spectroscopy,and photoelectrochemical tests.The influence of the loading of MoS2on the photocatalytic H2evolution activity was investigated using lactic acid as a sacrificial reagent.A H2evolution rate of343μmol/h was achieved under visible light irradiation over the1wt%MoS2/ZnIn2S4composite,corresponding to an apparent quantum efficiency of about3.85%at420nm monochromatic light.The marked improvement of the photocatalytic H2evolution activity compared with ZnIn2S4can be ascribed to efficient transfer and separation of photogenerated charge carriers and facilitation of the photocatalytic H2evolution reaction at the MoS2active sites.

Photodeposition of earth‐abundant cocatalysts in photocatalytic water splitting:Methods,functions,and mechanisms

Photocatalytic water splitting based on semiconductor photocatalysts is a promising approach for producing carbon‐neutral,sustainable,and clean H_(2) fuel.Cocatalyst loading,which is an appealing strategy,has been extensively employed to improve the photocatalytic efficiency semiconductors.In view of the high cost and rare preservation of noble metal cocatalysts that significantly hinder their utilization for large‐scale energy production,various cocatalysts comprising earth‐abundant ele‐ments have been developed as noble‐metal‐free candidates using different methods to boost pho‐tocatalytic water splitting.Among these preparation strategies,photodeposition has attracted tre‐mendous attention in the deposition of earth‐abundant cocatalysts owing to its simplicity and mod‐erate availability,improved interfacial charge separation and transfer,and abundant active sites on the surface.In this review,we first summarize the deposition principles,deposition advantages,categories of cocatalysts,roles of cocatalysts,influencing factors,modification strategies,and design considerations in the photodeposition of earth‐abundant cocatalysts.The photodeposited earth‐abundant cocatalysts for the photocatalytic H_(2) evolution half reaction,photocatalytic O_(2) evo‐lution half reaction,and overall photocatalytic water splitting are discussed.Finally,some perspec‐tives on the challenges and possible future directions for the photodeposition of earth‐abundant cocatalysts in photocatalytic water splitting are presented.

Large-scale synthesis of noble-metal-free phosphide/CdS composite photocatalysts for enhanced H_2 evolution under visible light irradiation

Photocatalytic H2evolution under visible light irradiation is an ideal process for solving energy shortage.The low cost of photocatalysts and high efficiency of hydrogen evolution are the two key factors to realize the industrialization of the process.The substitution of a noble‐metal cocatalyst with a non‐noble‐metal catalyst can significantly reduce the cost of the photocatalyst.The largescale synthesis and assembly of semiconductors and non‐noble‐metal cocatalysts to form photocatalysts through a simple method can further decrease the cost of photocatalysis.Here,we report a large‐scale and low‐cost coprecipitation method to form phosphide/CdS photocatalysts to realize photocatalytic H2evolution.CoP and MoP cocatalysts significantly enhanced the photocatalytic production of hydrogen.The optimal H2production rates on CoP/CdS and MoP/CdS were140and78μmol/h,which were7.0and4.0times higher than those obtained with bare CdS,respectively,and2.0times and1.1times higher than those obtained with1.0%Pt/CdS,respectively.This work provides a practical method for the large‐scale preparation of low‐cost photocatalysts.

Synergic effects of Cu_xO electron transfer co-catalyst and valence band edge control over TiO_2 for efficient visible-light photocatalysis

Bandgap engineering by doping and co‐catalyst loading are two primary approaches to designing efficient photocatalysts by promoting visible‐light absorption and charge separation,respectively.Shifting of the TiO2conduction band edge is frequently applied to increase visible‐light absorption but also lowers the reductive properties of photo‐excited electrons.Herein,we report a visible‐light‐driven photocatalyst based on valance band edge control induced by oxygen excess defects and modification with a CuxO electron transfer co‐catalyst.The CuxO grafted oxygen‐rich TiO2microspheres were prepared by ultrasonic spray pyrolysis of the peroxotitanate precursor followed by a wet chemical impregnated treatment.We found that oxygen excess defects in TiO2shifted the valence band maximum upward and improved the visible‐light absorption.The CuxO grafted onto the surface acted as a co‐catalyst that efficiently reduced oxygen molecules to active intermediates(i.e.,O2??radial and H2O2),thus consuming the photo‐generated electrons.Consequently,the CuxO grafted oxygen‐rich TiO2microspheres achieved a photocatalytic activity respectively8.6,13.0and11.0as times high as those of oxygen‐rich TiO2,normal TiO2and CuxO grafted TiO2,for degradation of gaseous acetaldehyde under visible‐light irradiation.Our results suggest that high visible‐light photocatalytic efficiency can be achieved by combining oxygen excess defects to improve visible‐light absorption together with a CuxO electron transfer co‐catalyst.These findings provide a new approach to developing efficient heterojunction photocatalysts.

Enhanced photocatalytic H_(2) production performance of CdS hollow spheres using C and Pt as bi-cocatalysts

Photocatalytic H2 production from water splitting is an effective method to solve energy crisis and environmental pollution simultaneously.Herein,carbon@CdS composite hollow spheres(C@CdS-HS)are fabricated via a facile hydrothermal method using porous carbon hollow spheres(C-HS)as the template.The C@CdS-HS shows an excellent photocatalytic H2-generation rate of 20.9 mmol h^(−1) g^(−1)(apparent quantum efficiency of 15.3%at 420 nm),with 1.0 wt%Pt as a cocatalyst under simulated sunlight irradiation;this rate is 69.7,13.9,and 3.9 times higher than that obtained with pure CdS hollow spheres(CdS-HS),C@CdS-HS,and CdS-HS/Pt,respectively.The enhanced photocatalytic H_(2)-evolution activity of C@CdS-HS/Pt is due to the synergistic effect of C and Pt as the bi-cocatalyst.The C-HS serves not only as an active site provider but also as an electron transporter and reservoir.Moreover,C-HS has a strong photothermal effect that is induced by near infrared light,which kinetically accelerates the H_(2)-production reaction.Additionally,the underlying charge transfer pathway and process from CdS to C−HS is revealed.This work highlights the potential application of C-HS-based nanocomposites in solar-to-chemical energy conversion.

Highly efficient visible-light photocatalytic H2 evolution over 2D–2D Cd S/Cu7S4 layered heterojunctions

Converting solar energy into clean and sustainable chemical fuels is a promising strategy for exploiting renewable energy.The application of photocatalytic water splitting technology in hydrogen production is important for sustainable energy development and environmental protection.In this study,for the first time,2D Cu7S4 co-catalysts were coupled on the surface of a CdS nanosheet photocatalyst by a one-step ultrasonic-assisted electrostatic self-assembly method at room temperature.The as-fabricated 2D^-2D CdS/Cu7S4 layered heterojunctions were demonstrated to be advanced composite photocatalysts that enhance the water splitting efficiency toward hydrogen production.The highest hydrogen evolution rate of the 2D^-2D CdS/2%Cu7S4 binary heterojunction photocatalyst was up to 27.8 mmol g^-1 h^-1 under visible light irradiation,with an apparent quantum efficiency of 14.7%at 420 nm,which was almost 10.69 times and 2.65 times higher than those of pure CdS nanosheets(2.6 mmol g^-1 h^-1)and CdS-2%CuS(10.5 mmol g^-1 h^-1),respectively.The establishment of the CdS/Cu7S4 binary-layered heterojunction could not only enhance the separation of photogenerated electron-hole(e--h+)pairs,improve the transfer of photo-excited electrons,and prolong the life-span of photo-generated electrons,but also enhance the light absorption and hydrogen-evolution kinetics.All these factors are important for the enhancement of the photocatalytic activity.Expectedly,the 2D^-2D interface coupling strategy based on CdS NSs can be extensively exploited to improve the hydrogen-evolution activity over various kinds of conventional semiconductor NSs.

Improved visible-light photocatalytic H_2 generation over CdS nanosheets decorated by NiS_2 and metallic carbon black as dual earth-abundant cocatalysts

CdS nanosheets(NSs)photocatalysts modified with dual earth‐abundant co‐catalysts of metallic carbon black(CB)and NiS2were synthesized by a two‐step solvothermal/impregnation method.Allthe experiment results demonstrated that the co‐loading of CB and NiS2could significantly enhance the photocatalytic H2‐evolution activity of CdS NSs.The photocatalytic performance of the as‐prepared CdS/CB/NiS2samples was tested under visible light(λ≥420nm)by using an aqueous solution containing0.25mol L–1Na2S‐Na2SO3as the sacrifice agent.The CdS‐0.5%CB‐1.0%NiS2composite photocatalysts exhibited the highest H2‐evolution rate of166.7μmol h?1,which was approximately5.16and1.87times higher than those of pure CdS NSs and CdS‐1.0%NiS2,respectively.The possible mechanism for the enhanced H2‐evolution activity of CdS/CB/NiS2composite photocatalysts was proposed.The results showed that the enhanced photocatalytic H2‐evolution activities could be ascribed to the co‐loading of metallic CB and NiS2as co‐catalysts onto the surface of CdS NSs.The excellent synergetic effect between the CB and NiS2could obviously improve visible light absorption,promote separation of photogenerated electron‐hole pairs and boost the H2‐evolution kinetics,thus leading to an enhanced activity for H2evolution.More interestingly,the metallic CB could not only act as a cocatalyst for H2evolution,but also serve as a conductive electron bridge to promote the charge migration.This work not only demonstrates that loading CB as a co‐catalyst is a promising strategy to further boost the photocatalytic activity of CdS/NiS2composites,but also offers a new mechanistic insight into the construction of highly efficient and stable CdS NSs‐based hybrid photocatalysts with dual earth‐abundant co‐catalysts for photocatalytic applications.