[Objective]The aim was to carry out stoichiometry on the early-spring herbs functional group in subtropical artificial wetland.[Method]UV-Vis spectrophotometer was used for the determination of nitrate-nitrogen,ammoni...[Objective]The aim was to carry out stoichiometry on the early-spring herbs functional group in subtropical artificial wetland.[Method]UV-Vis spectrophotometer was used for the determination of nitrate-nitrogen,ammonium nitrogen and phosphorus concentrations.Potassium persulfate absorptiometry was used for the measurement of total N content,while the flame photometer was used to detect the potassium and sodium concentration in plants.All the nutrient determination of plant samples were repeated for four times.[Result]The four nutrient concentrations in almost all samples were in the normal range of natural plant nutrition concentrations;in early-spring herbs functional groups,different species showed diversity on the nutrient concentrations;plant height had no significant effect on the nutrient concentrations in plants;the nutrient concentrations of non-grass group plants were higher than that of grass group plants;the nutrient concentrations of the annual herb were higher than that of perennial herbs.[Conclusion]The study had provided basis for the understanding of the effects of changes in nutritional conditions on species diversity,community structure and succession of the system.展开更多
A methodology for topology optimization based on element independent nodal density(EIND) is developed.Nodal densities are implemented as the design variables and interpolated onto element space to determine the densit...A methodology for topology optimization based on element independent nodal density(EIND) is developed.Nodal densities are implemented as the design variables and interpolated onto element space to determine the density of any point with Shepard interpolation function.The influence of the diameter of interpolation is discussed which shows good robustness.The new approach is demonstrated on the minimum volume problem subjected to a displacement constraint.The rational approximation for material properties(RAMP) method and a dual programming optimization algorithm are used to penalize the intermediate density point to achieve nearly 0-1 solutions.Solutions are shown to meet stability,mesh dependence or non-checkerboard patterns of topology optimization without additional constraints.Finally,the computational efficiency is greatly improved by multithread parallel computing with OpenMP.展开更多
As an indispensable energy source, lignite is almost exclusively used in power generation m TurKey, To assess me quality level of Turkish lignite, a multivariate statistical analysis was conducted. The relationship am...As an indispensable energy source, lignite is almost exclusively used in power generation m TurKey, To assess me quality level of Turkish lignite, a multivariate statistical analysis was conducted. The relationship among the lignite quality parameters has been investigated using a response method that is the logistic regression method. The analysis determines the effect of multiple predictor variables such as moisture, ash and sulphur presented simultaneously to predict membership of the two calorific value categories. By this way, a reliable binary response regression structure was constructed considering all the lignite fields in Turkey. Both the experiments on identifying the influential measurements and the measure of goodness of fit indicated that the overall model has a big capability to exhibit the relationship among the parameters of the Turkish lignite.展开更多
Trace element analysis on hair samples has been widely used to assess wildlife and human exposure to different contaminants present in the environment or at the workplace. Pollutants due to the presence of toxic metal...Trace element analysis on hair samples has been widely used to assess wildlife and human exposure to different contaminants present in the environment or at the workplace. Pollutants due to the presence of toxic metals in environment not only enter the body by breading, water, and foodstuff accumulates in hair, but they could be adsorbed directly on the hair from environment. In order to remove adsorbed elements and thus determine the internally bound elements correctly, hair sample must be washed. In the present work, we propose uncertainty estimation for the analytical results that are obtained from determination of cadmium, lead, copper, iron, manganese and nickel in human hair by flame and electrothermal atomic absorption spectrometry (FAAS and ETAAS). To estimate the uncertainty of analytical result obtained, two types of bias are calculated in the assessment of trueness: a proportional bias and a constant bias. Nested design was applied for calculating proportional bias and Youden method to calculate the constant bias. The results we obtained for proportional bias are calculated from spiked samples. In this case, the concentration found is plotted against the concentration added and the slop of standard addition curve is an estimate of the method recovery. Estimated method of average recovery in human hair is: (1.019 ±0.026), (0.918 ±0.014), (1.073±0.016), (1.0597± 0.017), (1.073± 0.020) and (0.934± 0.117) for Cd, Pb, Mn, Ni, Fe and Cu respectively.展开更多
基金Supported by National Natural Science Foundation of China(30370146)~~
文摘[Objective]The aim was to carry out stoichiometry on the early-spring herbs functional group in subtropical artificial wetland.[Method]UV-Vis spectrophotometer was used for the determination of nitrate-nitrogen,ammonium nitrogen and phosphorus concentrations.Potassium persulfate absorptiometry was used for the measurement of total N content,while the flame photometer was used to detect the potassium and sodium concentration in plants.All the nutrient determination of plant samples were repeated for four times.[Result]The four nutrient concentrations in almost all samples were in the normal range of natural plant nutrition concentrations;in early-spring herbs functional groups,different species showed diversity on the nutrient concentrations;plant height had no significant effect on the nutrient concentrations in plants;the nutrient concentrations of non-grass group plants were higher than that of grass group plants;the nutrient concentrations of the annual herb were higher than that of perennial herbs.[Conclusion]The study had provided basis for the understanding of the effects of changes in nutritional conditions on species diversity,community structure and succession of the system.
基金Projects(11372055,11302033)supported by the National Natural Science Foundation of ChinaProject supported by the Huxiang Scholar Foundation from Changsha University of Science and Technology,ChinaProject(2012KFJJ02)supported by the Key Labortory of Lightweight and Reliability Technology for Engineering Velicle,Education Department of Hunan Province,China
文摘A methodology for topology optimization based on element independent nodal density(EIND) is developed.Nodal densities are implemented as the design variables and interpolated onto element space to determine the density of any point with Shepard interpolation function.The influence of the diameter of interpolation is discussed which shows good robustness.The new approach is demonstrated on the minimum volume problem subjected to a displacement constraint.The rational approximation for material properties(RAMP) method and a dual programming optimization algorithm are used to penalize the intermediate density point to achieve nearly 0-1 solutions.Solutions are shown to meet stability,mesh dependence or non-checkerboard patterns of topology optimization without additional constraints.Finally,the computational efficiency is greatly improved by multithread parallel computing with OpenMP.
文摘As an indispensable energy source, lignite is almost exclusively used in power generation m TurKey, To assess me quality level of Turkish lignite, a multivariate statistical analysis was conducted. The relationship among the lignite quality parameters has been investigated using a response method that is the logistic regression method. The analysis determines the effect of multiple predictor variables such as moisture, ash and sulphur presented simultaneously to predict membership of the two calorific value categories. By this way, a reliable binary response regression structure was constructed considering all the lignite fields in Turkey. Both the experiments on identifying the influential measurements and the measure of goodness of fit indicated that the overall model has a big capability to exhibit the relationship among the parameters of the Turkish lignite.
文摘Trace element analysis on hair samples has been widely used to assess wildlife and human exposure to different contaminants present in the environment or at the workplace. Pollutants due to the presence of toxic metals in environment not only enter the body by breading, water, and foodstuff accumulates in hair, but they could be adsorbed directly on the hair from environment. In order to remove adsorbed elements and thus determine the internally bound elements correctly, hair sample must be washed. In the present work, we propose uncertainty estimation for the analytical results that are obtained from determination of cadmium, lead, copper, iron, manganese and nickel in human hair by flame and electrothermal atomic absorption spectrometry (FAAS and ETAAS). To estimate the uncertainty of analytical result obtained, two types of bias are calculated in the assessment of trueness: a proportional bias and a constant bias. Nested design was applied for calculating proportional bias and Youden method to calculate the constant bias. The results we obtained for proportional bias are calculated from spiked samples. In this case, the concentration found is plotted against the concentration added and the slop of standard addition curve is an estimate of the method recovery. Estimated method of average recovery in human hair is: (1.019 ±0.026), (0.918 ±0.014), (1.073±0.016), (1.0597± 0.017), (1.073± 0.020) and (0.934± 0.117) for Cd, Pb, Mn, Ni, Fe and Cu respectively.